DreamGEAR 9 in 1 Starter Kit for the PSPgo User guide

DreamGEAR
Brand
DreamGEAR
Model
9 in 1 Starter Kit for the PSPgo
Category
Game console accessories
Type
User guide
PACKAGE CONTENTS:
• Neo Fit Case
• Comfort Grip
• Earbuds with In-line Microphone
• Dual USB Car Charger
• Screen Protector
• Crystal Clear Case
• Wrist Strap
• M2 Media Card Reader
NEO FIT CASE
The Neo Fit Case is made using a durable Neoprene material that securely
holds the PSPgo and protects it from scratches. It has multiple inner-
pockets for carrying accessories such as Earbuds, M2 Media Cards (sold
separately) and M2 Card readers.
1. Unzip Neo Fit Case and insert PSPgo into the Neo Fit Case.
2. Zip close the Neo Fit Case to secure PSPgo for portability.
COMFORT GRIP
Adds comfort and improves your grip while gaming with the PSPgo.
1. Insert the PSPgo into the Comfort Grip.
NOTE: The PSPgo should be fully closed before inserting into the Comfort Grip.
2. Slide open the PSPgo.
EARBUDS WITH IN-LINE MICROPHONE
Optimize your audio experience with these high-quality stereo earbuds.
The in-line microphone allows you to use the PSPgo’s voice function.
1. Insert the 3.5mm end of the earbuds into the headphone jack located on
the PSPgo.
2. Volume can be adjusted by the volume control on the PSPgo.
CRYSTAL CLEAR CASE
Protect the PSPgo from dirt, scratches and normal wear-and-tear with this
snap-on transparent casing.
1. Place the PSPgo into the bigger part of the Crystal Clear Case. You
should hear a clicking sound when it is secure and in place.
2. With the PSPgo closed, please the smaller part of the Crystal Clear Case
on top of the PSPgo. You should hear a clicking sound when it is secure
and in place.
3. To remove, with the PSPgo open, simply unhook the Crystal Clear Case
from the sides of the PSPgo for both the top and bottom parts.
USER’S GUIDE
SCREEN PROTECTOR
Protect the PSPgo’s screen against dust and scratches with these easy-on
transparent screen protectors.
1. Peel the top of the screen protector by pulling the sticker to the right.
2. Once you peel the screen protector apart, the part with the sticker
belongs on the screen.
3. The sticky part is the side that you place onto the screen.
DUAL USB CAR CHARGER
Charge the PSPgo from any car outlet. The Dual USB allows you to power
or charge additional electronic devices that use a USB power/charge cable.
NOTE: Requires original USB charge cable (not included)
1. Connect the Dual USB Car Charger to the car outlet.
2. Plug the charge cable (not included) into the Dual USB Car Charger.
3. Plug the other end of the charge cable into the electronic device.
WRIST STRAP
Attaches to the Neo Fit Case (included) or directly to the PSPgo to help
prevent accidental dropping.
1. To attach the wrist strap to the PSPgo, thread the string through the
wrist strap loop located on the lower left of the PSPgo.
2. To attach the wrist strap to the Neo Fit Case, thread the string through
the metal loop located on the side of the Neo Fit Case.
M2 MEDIA CARD READER
Transfer your favorite games, media and data from your computer to the
PSPgo M2 Media Card (not included).
1. Insert the M2 Media Card (not included) into the back of the M2 Media
Card Reader.
2. Remove the top of the M2 Media Card Reader and connect the M2
Media Card Reader to a powered USB port on your computer.
3. Drag and drop your photos, music or data to the M2 Media Card drive
on your computer.
4. Remove the M2 Media Card Reader and slide it into the PSPgo.
NOTE: When not in use, make sure you replace the protective cap on the
M2 Media Card Reader.
  • Page 1 1

DreamGEAR 9 in 1 Starter Kit for the PSPgo User guide

DreamGEAR
Brand
DreamGEAR
Model
9 in 1 Starter Kit for the PSPgo
Category
Game console accessories
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents