JVC HR-5911U User manual

Brand: JVC

Model: HR-5911U

Category: Cassette players

Type: User manual

This manual is also suitable for

HRS5901U

—1—

Page 1 January 25, 2002 9:21 am

VIDEO CASSETTE RECORDER

HR-S5901/5911U

INSTRUCTIONS

LPT0638-001A

CONTENTS

Buttons, Connectors and Indicators ................................................4

Connections and Plug&Play Setting ................................................5

Initial Settings ..............................................................................6

Language Setting ....................................................................6

Clock Setting ..........................................................................6

Tuner Setting ..........................................................................7

Cable Box and/or DBS Receiver Control Setting .....................7

Playback ......................................................................................9

Basic Playback .......................................................................9

Playback Features ...................................................................9

Recording ...................................................................................11

Basic Recording ...................................................................11

Recording Features ...............................................................11

Timer Recording ..........................................................................12

Changing VCR Plus+

Setting ................................................12

VCR Plus+

Timer Programing ..............................................12

Express Timer Programing ....................................................13

24HR Quick Programing ......................................................13

Other Functions ..........................................................................14

Timer warning display ..........................................................14

Checking tape position .........................................................14

Changing display information ...............................................14

Function settings ..................................................................14

Satellite Auto Recording .......................................................16

Child Lock ............................................................................16

Multi-Brand Remote Control ................................................17

Changing Remote Control Code ...........................................17

Editing .......................................................................................18

Editing with Another VCR......................................................18

Audio Dubbing ....................................................................19

Insert Editing and AV Dubbing .............................................19

Specifications ..............................................................................20

Troubleshooting ..........................................................................21

FOR SERVICING (Only in U.S.A.) ..................................................22

WARRANTY (Only in U.S.A.) .......................................................23

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder.

Before use, please read the safety information and precautions to

ensure safe use of your new VCR.

CAUTIONS

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

CAUTION:

This video cassette recorder should be used with AC 120V

60Hz only.

To prevent electric shocks and fire hazards, DO NOT use any

other power source.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU

FOND.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines

for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

HR-S5901U-EN.fm Page 1 Friday, January 25, 2002 9:21 AM

—2—

Page 2 January 23, 2002 3:52 pm

Failure to heed the following precautions may result in damage to

the VCR, Remote or video cassette.

1. DO NOT

place the VCR . . .

...in an environment prone to extreme temperatures or

humidity.

...in direct sunlight.

...in a dusty environment.

...in an environment where strong magnetic fields are

generated.

...on a surface that is unstable or subject to vibration.

2. DO NOT

block the VCR’s ventilation openings.

3. DO NOT

place heavy objects on the VCR or on the Remote.

4. DO NOT

place anything which might spill on the top of the

VCR or on the Remote.

5. AVOID

violent shocks to the VCR during transport.

VCR Plus+, C

and PlusCode are registered trademarks of Gemstar

Development Corporation.

The VCR Plus+ system is manufactured under license from

Gemstar Development Corporation.

● Cassettes marked “S-VHS” and “VHS” can be used with this

video cassette recorder. However, S-VHS recordings are

possible only with cassettes marked “S-VHS”.

By using S-VHS ET it is possible to record and play back with

S-VHS picture quality on VHS cassettes with this VCR.

● As an E

NERGY

TAR

Partner, JVC has determined that this product

or product model meets the E

NERGY

TAR

guidelines for energy

efficiency.

IMPORTANT PRODUCT SAFETY

INSTRUCTIONS

Electrical energy can perform many useful functions. But improper

use can result in potential electrical shock or fire hazards. This

product has been engineered and manufactured to assure your

personal safety. In order not to defeat the built-in safeguards,

observe the following basic rules for its installation, use and

servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your

product and its operating instructions. For your safety, please read

all the safety and operating instructions before you operate this

product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A) Your product may be equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way.

This is a safety feature.

If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

(B) Your product may be equipped with a 3-wire grounding-type

plug, a plug having a third (grounding) pin. This plug will only

fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your product dealer or local

power company. If your product is intended to operate from

battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or

electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it from

overheating, these openings must not be blocked or covered.

● Do not block the openings by placing the product on a bed,

sofa, rug or other similar surface.

● Do not place the product in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product,

be sure the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding connectors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

CAUTION:

Changes or modifications not approved by JVC could void

user’s authority to operate the equipment.

Declaration of Conformity

Model Number: HR-S5901/5911U

Trade Name: JVC

Responsible Party: JVC Americas Corp.

Address: 1700 Valley Road Wayne, N.J. 07470

Telephone Number: 973-317-5000

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

For Customer Use:

Enter below the Model No. and Serial No. which are located

on the rear of cabinet. Retain this information for future

reference.

Model No.

Serial No.

HR-S5901U-EN.fm Page 2 Wednesday, January 23, 2002 3:52 PM

—3—

Page 3 January 23, 2002 3:52 pm

2. Lightning

For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to lightning

and power-line surges.

3. Power Lines

An outside antenna

system should not be

located in the vicinity of

overhead power lines or

other electric light or

power circuits, or where

it can fall into such

power lines or circuits.

When installing an

outside antenna system,

extreme care should be

taken to keep from

touching such power

lines or circuits as

contact with them might

be fatal.

USE

1. Accessories

To avoid personal injury:

● Do not place this product on an unstable cart, stand, tripod,

bracket, or table. It may fall, causing serious injury to a child or

adult, and serious damage to the product.

● Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold with the product.

● Use a mounting accessory recommended by the manufacturer

and follow the manufacturer’s instructions for any mounting of

the product.

● Do not try to roll a cart with small casters across thresholds or

deep-pile carpets.

2. Product and Cart Combination

A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces may

cause the product and cart combination

to overturn.

3. Water and Moisture

Do not use this product near water—for

example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet

basement, or near a swimming pool and

the like.

4. Object and Liquid Entry

Never push objects of any kind into this product through openings

as they may touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of any

kind on the product.

5. Attachments

Do not use attachments not recommended by the manufacturer of

this product as they may cause hazards.

6. Cleaning

Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

7. Heat

The product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

SERVICING

1. Servicing

If your product is not operating correctly or exhibits a marked

change in performance and you are unable to restore normal

operation by following the detailed procedure in its operating

instructions, do not attempt to service it yourself as opening or

removing covers may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

2. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance—

this indicates a need for service.

3. Replacement Parts

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or which have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock or other hazards.

4. Safety Check

Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the

product is in safe operating condition.

How to use the Remote

Before use, insert two AA size batteries into the Remote with the

polarity ( and ) matched correctly as indicated on the battery

compartment or on the lid.

The Remote can operate most of your VCR’s functions, as well as

basic functions of TV sets, cable boxes and DBS receivers.

● Point the Remote toward the remote sensor on the target

component.

● The maximum operating distance of the Remote is about 8 m.

NOTE:

If the Remote does not work properly, remove its batteries, wait for

a few seconds, replace the batteries and then try again.

Video heads cleaning

The heads get dirty in the following cases:

● in an environment prone to extreme temperature or humidity.

● in a dusty environment

● flaw, dirt or mold on video tapes

● continuous usage for a long time

Use a dry cleaning cassette — TCL-2 — when:

● Rough, poor picture appears while a tape is played back.

● The picture is unclear or no picture appears.

● “USE CLEANING CASSETTE” appears on the screen (only with

“SUPERIMPOSE” set to “ON” (

墌

pg. 15)).

TTENTION:

To mobile phone users:

Using a mobile phone in the vicinity of the VCR may cause

picture vibration on the TV screen or change the screen to a

blue back display.

On placing the recorder:

Some TVs or other appliances generates strong magnetic fields.

Do not place such appliance on top of the VCR as it may cause

picture disturbance.

HR-S5901U-EN.fm Page 3 Wednesday, January 23, 2002 3:52 PM

—4—

Page 4 January 25, 2002 9:24 am

Front Panel

Rear Panel

Remote

On-screen display

If you press OSD (OK) on the Remote when “SUPERIMPOSE” is

set to “ON” (

墌

pg. 15), you can see the current VCR status on the

TV screen.

The indications are not recorded even if the VCR is in the

recording mode.

Buttons, Connectors and

Indicators

REW

REC LINK

24HR QUICK

PROGRAM

S-VIDEO

POWER

INSERT

A.DUB

Cassette

loading slot

VIDEO/AUDIO input

connectors

Display panel

VCR mode

indicator

Play indicator

Record indicator

Timer mode indicator

Channel and auxiliary input/Clock time

Remote

sensor

Advanced

JOG dial

S-VIDEO

input

connector

S-VHS

indicator

S-VIDEO

AC power cord

The glow-in-the-dark buttons shown in white on the illustration

above are helpful when using the Remote in darkened rooms.

To recall an indication

Press OSD (OK).

●

All indications corresponding to the current status are

displayed for 5 seconds. After that, the counter

information and RECORD/PAUSE if in the Record Pause

mode, remain on the TV screen.

Press OSD (OK) again to clear the display.

●

The RECORD/PAUSE indication remains on the TV screen.

Number keys

Channel and

auxiliary input

Day and

clock time

STEREO

program

indication

SAP

indication

Audio

monitor

indications

VCR operation

mode

Tape speed

Cassette mark

Tape position

Index number

Timer warning display

Time counter

Tap e

remaining time

HR-S5901U-EN.fm Page 4 Friday, January 25, 2002 9:24 AM

—5—

Page 5 January 25, 2002 4:39 pm

Check contents

Make sure the package contains all of the accessories listed in

“Specifications” (

墌

pg. 20).

Situate VCR

Place the VCR on a stable, horizontal surface.

Connect VCR to TV

RF Connection

Disconnect the TV antenna from the TV.

Connect the TV antenna cable to the ANT. IN terminal on the

rear of the VCR.

Connect the supplied RF cable between the TV OUT terminal

on the rear of the VCR and the TV’s antenna input terminal.

AV Connection

(improves picture quality during tape playback.)

If your TV is equipped with audio/video input connectors

Connect the antenna, VCR and TV as shown in the illustration.

Connect an audio/video cable between the AUDIO/VIDEO

OUT connectors on the rear of the VCR and the audio/video

input connectors on the TV.

S-video Connection

(allows you to make the most of the S-VHS picture performance.)

If your TV is equipped with a S-video input connector

Perform “RF Connection” above.

Connect a S-video cable between the S VIDEO OUT

connector on the rear of the VCR and the S-video input

connector on the TV.

Connect an audio cable between the AUDIO OUT connectors

on the rear of the VCR and the audio input connectors on the

TV.

●

Even if you are using audio/video cables to connect your VCR to

your TV, you must also connect it using the RF cable. This will

ensure that you can record one show while watching another.

Perform Plug&Play setup

Plug the AC power cord into an AC outlet. Do not turn on the

VCR. The clock and tuner channels will be set automatically. The

time and date can be set automatically by the clock setting data

transmitted from one of the regular TV broadcast channels. We

call this TV channel the “host channel” and it is a PBS channel in

your area.

TTENTION:

●

If you use a cable box, Plug&Play will not function; set the clock

and tuner channels separately (

墌

pg. 6 – 7).

●

Depending on areas or reception conditions, the VCR may not

receive the Auto clock setting data from the PBS channel. If this

function is taking a considerable amount of time, it may be

necessary to perform the procedure in “Semiauto Clock Set”

(

墌

pg. 6) or “Manual Clock Set” (

墌

pg. 6).

What to do if Plug&Play setting failed

●

If an incorrect time is displayed on the display panel, perform

the procedure in “Semiauto Clock Set” (

墌

pg. 6) or “Manual

Clock Set” (

墌

pg. 6).

●

If “–:– –” appears on the display panel, ensure that the antenna

cable is connected correctly. Then turn on and off the VCR; the

Plug&Play setting will be automatically reactivated. If Plug&Play

setting is not performed though the antenna cable is connected

correctly, perform the procedure in “Manual Clock Set”

(

墌

pg. 6) and “Auto Channel Set” (

墌

pg. 7) or “Manual

Channel Set” (

墌

pg. 7).

Set VCR channel

The VCR channel is the channel on which you can watch the

picture from the VCR on the TV when only using the RF

connection. Press POWER 1 to turn off the VCR, then press

STOP/EJECT (

) on the VCR for more than 5 seconds. “CH3”

appears on the display panel. Press CH+/– on the Remote to select

“CH3”, “CH4” or “CH–”(OFF), then press OK.

●

The VCR channel is preset to “CH3”. Set to “CH4” if CH3 is

used for broadcasting in your area.

Final preparation for use

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or

AV mode) on the TV. You can now perform basic playback or basic

recording.

●

If you connect the TV and the VCR only using the RF

connection, press TV/VCR on the Remote so that the VCR mode

indicator lights on the display panel.

Connections and Plug&Play

Setting

RF cable

(supplied)

Back of VCR

Flat feeder

AC power cord

Audio/video

cable

(not supplied)

To audio/video

input connectors

Antenna or cable

Matching transformer

(not supplied)

Coaxial cable

AC outlet

To 7 5

⍀

terminal

To S-video input

connector

S-video cable

(supplied)

During Initial Auto Clock Set

“Aut” blinks.

During Auto Channel Set

The channel numbers are displayed as they are

scanned and set.

Plug&Play Completed

The current time is displayed.

HR-S5901U-EN.fm Page 5 Friday, January 25, 2002 4:39 PM

— 6 —

Page 6 January 25, 2002 10:12 am

Language Setting

The default setting is “ENGLISH”.

Access Main Menu screen, then Initial

Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to “INITIAL

SET”, then press OK or

Select language

This VCR offers you the language choice to

view menus and some messages — in

English, Spanish or French. Press

move the highlight bar (arrow) to

“LANGUAGE”, then press OK or

repeatedly until the desired language is

selected.

Press MENU to return to normal screen.

Clock Setting

Perform clock setting only if the clock has not been set correctly

by the Plug&Play setting or if you use a cable box.

Preparations

Access Main Menu screen, then Initial

Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to “INITIAL

SET”, then press OK or

Access Clock Set screen

Press

to move the highlight bar

(arrow) to “CLOCK SET”, then press OK or

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/

time zone setting manually. First follow steps

1 to 2

2 in

“Preparations” above, then go to the following steps.

NOTE:

The time set previously will be erased when “AUTO CLOCK”,

“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

Set Auto Clock to ON

Press OK or

on the Remote repeatedly to

move the highlight bar to “AUTO CLOCK”,

then press

so that “ON” is selected.

Select host channel

You can either select “AUTO” or enter a PBS channel number.

Press OK or

to move the highlight bar to “HOST CH”, then

press

repeatedly until “AUTO” or the desired PBS channel

number is selected.

● Some PBS channels do not transmit clock setting data.

Select D.S.T. mode

Press OK or

to move the highlight bar to “D.S.T.”, then press

repeatedly until the desired setting is selected.

AUTO

: Select if you want to adjust your VCR’s clock

automatically by the incoming signal from the host

channel. (Auto Daylight Saving Time enables automatic

adjustment of the VCR’s clock at the start and end of

Daylight Saving Time.) Be sure to select the correct time

zone manually in step

: Adjustment will be made by the built-in clock itself.

OFF

: Select when Daylight Saving Time does not apply to you.

Select time zone

Press OK or

to move the highlight bar to “TIME ZONE”, then

press

repeatedly until “AUTO” or the desired time zone is

selected. Each time you press the button, the time zone changes as

follows:

{

AUTO

{

ATLANTIC

{

EASTERN

{

CENTRAL

{

MOUNTAIN

{

PACIFIC

{

ALASKA

{

HAWAII

{

(back to the beginning)

Complete Semiauto Clock Set

Press MENU to return to normal screen. Turn off the VCR. “Aut”

will appear on the display panel while the clock is being set. The

current clock time will appear automatically when the clock

setting is complete.

Setting clock manually

— Manual Clock Set

First follow steps 1

1 to 2

2 in “Preparations” above, then go to the

following steps.

Set time, date and year

Press

until the desired time appears,

then press OK or

. Set the date and year

in the same way.

● Holding

changes the time in 30-

minute intervals, or changes the date in

15-day intervals.

Select D.S.T. mode

Press OK or

to move the highlight bar to

“D.S.T.”, then press

to select the

desired setting.

: Adjustment will be made by the

built-in clock itself.

OFF

: Select when Daylight Saving Time

does not apply to you.

Start clock

Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or

repeatedly until the item you want to change

blinks, then press

Initial Settings

Language selection will be reset to “ENGLISH” after a power

failure occurs.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

INITIAL SET

CLOCK SET

LANGUAGE ENGLISH

GUIDE CHANNEL SET

CABLE BOX SET

DBS RECEIVER SET

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

INITIAL SET

CLOCK SET

LANGUAGE ENGLISH

GUIDE CHANNEL SET

CABLE BOX SET

DBS RECEIVER SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

CLOCK SET

TIME DATE YEAR

– –:– – AM 1/ 1 02

AUTO CLOCK : ON

HOST CH : AUTO (CATV)

D.S.T. : AUTO

TIME ZONE : AUTO

Selections of host channel and D.S.T. mode will be reset to

“AUTO” after a power failure occurs.

Manual setting of the clock will be lost after a power failure

occurs.

HR-S5901U-EN.fm Page 6 Friday, January 25, 2002 10:12 AM

— 7 —

Page 7 January 23, 2002 3:52 pm

Tuner Setting

Setting channels automatically

— Auto Channel Set

Perform Auto Channel Set only if channels have not been set

correctly by the Plug&Play setting.

Access Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to “TUNER

SET”, then press OK or

Perform Auto Channel Set

Press

to move the highlight bar

(arrow) to “AUTO CHANNEL SET”, then

press OK or

. The VCR selects the correct

band (TV or CATV) automatically during

Auto Channel Set.

● When Auto Channel Set is complete,

“SCAN COMPLETED” appears on

screen.

● If the scan was unsuccessful, “SCAN

COMPLETED–NO SIGNAL–” appears on

screen. Check the connections and start

again.

Press MENU to return to normal screen.

Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do

not want manually.

Access Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to “TUNER

SET”, then press OK or

Access Manual Channel Set screen

Press

to move the highlight bar

(arrow) to “MANUAL CHANNEL SET”,

then press OK or

Add or skip desired channels

To add channels

Press the Number keys on the Remote

to input a channel number you want to

add.

Press OK or

to set to “ADD”.

Repeat

to add other channels.

Press MENU to return to normal screen.

To skip channels

Press

or the Number keys to select a channel number you

want to skip.

Press OK or

to set to “SKIP”.

Repeat

and

to skip other channels. Press MENU to return

to normal screen.

Cable Box and/or DBS Receiver Control

Setting

The following procedure is required if you receive your TV

channels through a cable box (descrambler) and/or if you receive

satellite channels through DBS (Direct Broadcast Satellite)

receiver. The Controller allows the VCR to automatically switch

the cable box or DBS receiver’s channel during timer recording.

NOTES:

● The Controller is not supplied with this unit. It can be requested

by mailing in the completed JVC Cable Mouse Certificate that is

included with the accessory package.

● For the cable box, the Controller is effective for VCR Plus+ or

Express timer programing.

● For the DBS receiver, the Controller is effective only for Express

timer programing.

● When connecting your cable box or DBS receiver, refer to its

instruction manual.

Situate Controller

If both a cable box and a DBS receiver are used, position the

Controller so its signal reaches the remote sensors on both the

cable box and DBS receiver.

Attach Controller

Fix securely using the adhesive strip attached on the back of the

Controller.

Connect cable box and/or DBS receiver to VCR

● If your cable box or DBS receiver does not have audio/video

output connectors, connect the RF output terminal on the unit to

the ANT. IN terminal on the rear of your VCR.

● If your cable box or DBS receiver has audio/video output

connectors, connect an audio/video cable between the AUDIO/

VIDEO IN connectors on the rear of the VCR and the audio/

video output connectors on the unit.

● If both a cable box and a DBS receiver are used, it is

recommended that you connect the DBS receiver to your VCR’s

AUDIO/VIDEO IN connectors and the cable box to your VCR’s

ANT. IN connector.

After a power failure occurs, band selection will be reset to

“CATV”.

Your VCR

Cable box or DBS receiver

Controller

(suggested locations)

Transmitter

Controller

Cable box or DBS receiver

To ANT. IN

To AUDIO/VIDEO IN

RF out Audio/video output

VCR

CONTINUED ON NEXT PAGE

HR-S5901U-EN.fm Page 7 Wednesday, January 23, 2002 3:52 PM

— 8 —

Page 8 January 23, 2002 3:52 pm

Connect Controller to VCR

Connect the Controller to the CABLE BOX Controller connector

on the rear panel.

Turn on cable box or DBS receiver

Select a channel other than channel 9 on your cable box, or

channels 55, 100, 205 on your DBS receiver.

Access Main Menu screen, then Initial Set screen on VCR

Press MENU on the Remote. Press

to move the highlight bar

(arrow) to “INITIAL SET”, then press OK or

Access Cable Box Set screen or DBS

Receiver Set screen

Press

to move the highlight bar

(arrow) to “CABLE BOX SET” or “DBS

RECEIVER SET”, then press OK or

Select output channel

Your selection depends on how the unit is

connected to your VCR.

● If the unit is connected to your VCR’s

ANT. IN terminal on the rear panel,

Press

until the channel number

representing the cable box’s output (CH2

– CH9) or DBS receiver’s output (CH3 or CH4) appears on the

screen.

● If the unit is connected to your VCR’s AUDIO/VIDEO IN

connectors on the front panel, press

until “ON F-1

(FRONT)” appears on the screen.

● If the unit is connected to your VCR’s AUDIO/VIDEO IN

connectors on the rear panel, press

until “ON L-1 (REAR)”

appears on the screen.

● If you do not use any unit, press

until “OFF” appears on

the screen.

Access Brand Set screen

Press OK or

● If the Clock Set screen appears, perform “Manual Clock Set”. If

you press MENU after the clock has been set, the Brand Set

screen appears.

Enter brand code and perform test

Press the appropriate Number keys on the

Remote to enter the brand code from the

following list, then press OK or

For cable box

● If the cable box’s channel changes to 9,

setting is complete. Press OK.

● If the cable box’s channel does not

change to 9;

Press

to move the highlight bar

(arrow) to “NO”, then press OK or

Repeat step

until the cable box’s channel changes to 9 by

entering another code.

If the channel does not change after going through all the code

numbers listed for your model of cable box, then try all the

other numbers.

For DBS receiver

● If the DBS receiver’s channel changes to

the channel listed below for your brand,

setting is complete. Press OK or

● If the DBS receiver’s channel does not

change as shown above;

Press

to move the highlight bar (arrow) to “NO”, then

press OK or

Repeat step

CABLE BOX BRAND CODE

ARCHER

CABLETENNA

CABLEVIEW

CITIZEN

CURTIS

DIAMOND

GC BRAND

GEMINI

GENERAL INSTRUMENTS

HAMLIN

JASCO

JERROLD

NOVAVISION

OAK

PANASONIC

PULSER

RCA

REGAL

REMBRANDT

SAMSUNG

SCIENTIFIC ATLANTA

SIGMA

SL MARX

SPRUCER

STARGATE

TELEVIEW

TOCOM

UNIKA

UNIVERSAL

VIDEOWAY

ZENITH

1, 5, 17

1, 17

15, 16, 17, 21, 25

2, 8

1, 17

15, 16, 17, 21, 25

1, 4, 6, 11, 12, 15, 28

10, 18, 23

1, 4, 6, 11, 12, 15, 28

2, 8

7, 20

13, 14

15, 16, 17, 21, 25

13, 14

10, 18, 23

1, 16, 17

5, 16, 24

2, 8

7, 20

5, 16, 17, 24, 25

13, 14

5, 15, 16, 17, 21, 24, 25

5, 16, 24

1, 4, 16

1, 17

16, 17, 25

3, 9, 22

DBS RECEIVER BRAND CODE DBS RECEIVER BRAND CODE

JVC (DISH Network)

ECHOSTAR (DISH

Network)

SONY (DSS)

RCA (DSS)

JVC

ECHOSTAR

]

100

SONY

RCA

]

205

HR-S5901U-EN.fm Page 8 Wednesday, January 23, 2002 3:52 PM

—9—

Page 9 January 25, 2002 9:26 am

Basic Playback

Load a cassette

Make sure the window side

is up, the rear label side is

facing you and the arrow on

the front of the cassette is

pointing towards the VCR.

● Do not apply too much pressure when inserting.

● The VCR turns on, and the counter on the on-screen display is

reset, automatically.

● If the cassette’s record safety tab has been removed, playback

begins automatically.

Start playback

Press PLAY (

● The S-VHS indicator lights up when you play back a tape

recorded in S-VHS mode or in S-VHS ET mode (

墌

pg. 11).

Playback Features

Adjusting tracking condition

— Tracking Adjustment

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking

starts working and continuously analyzes the signal to enable

optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during

playback, follow the procedures below.

On the Remote

Press SP/EP during playback to activate manual tracking.

Press CH +/– to eliminate the noises. Press it briefly for a fine

adjustment, or press and hold for a coarse adjustment.

● Press SP/EP again to reactivate automatic tracking.

Selecting monitor sound

— Audio Monitor

While playing back a tape on which stereo sound or SAP sound is

recorded, press A.MONITOR on the Remote. Each time you press

the button, sound changes.

HI-FI: Normally select this. Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back.

NORM: Sound on the normal track is played back.

NORM HI-FI: Both sounds on the Hi-Fi track and normal track are

mixed and played back.

NOTE:

The above indication appears when “SUPERIMPOSE” is set to

“ON” (

墌

pg. 15), though the monitor sound changes in

sequence.

Playback

During playback

Stop playback

Press STOP (

) on the

Remote.

OR Press STOP/EJECT (

) on

the VCR.

Pause playback and view still picture

Press PAUSE (

● Press PLAY (

) to resume

normal playback.

OR Push the JOG dial.

● Push the JOG dial again to

resume normal playback.

NOTE:

During still picture, vertical vibration may appear on the TV

screen. Press CH+/– on the Remote to get a clearer picture.

Pause and Frame-by-Frame playback

Press PAUSE (

) to pause,

then press

(or

PAUSE (

)) repeatedly.

● Press PLAY (

) to resume

normal playback.

OR Push the JOG dial to pause,

then turn the JOG dial to the

left or right.

● Push the JOG dial again to

resume normal playback.

High-Speed Picture Search

Press REW (

) or FF

(

OR Turn the JOG dial quickly to

the left or right.

● Press PLAY (4

) to resume normal playback.

● If you press and hold REW (

) or FF (

) for more than

2 seconds, simply releasing it cancels the picture search, and

normal playback resumes.

Variable-Speed Picture Search (including slow-motion)

Press

repeatedly.

OR Turn the JOG dial to the left

or right.

● Press PLAY (4

) to resume normal playback.

● Each time you press

or each time JOG dial passes

a click position, the playback speed changes. To decrease the

speed during picture search, press the opposite direction button

repeatedly or turn the dial in the opposite direction.

● During still picture, press and hold

to start forward (or

to start reverse) slow motion playback. When you release

the button, still picture resumes. During still picture, holding

PAUSE (

) for more than 2 seconds also starts forward slow

motion playback. If you press PAUSE (

) again, still picture

resumes.

NOTE:

During slow motion, some noise may appear on the TV screen.

Press CH+/– on the Remote to eliminate the noise.

REW

REC LINK

24HR QUICK

PROGRAM

S-VIDEO

POWER

INSERT

A.DUB

When the tape is not running

Rewind/fast-forward

Press REW (

) or FF

(

OR Turn the JOG dial to the left

or right.

Eject the cassette

Press STOP/EJECT (

● You can also eject the cassette when the VCR is turned off.

Turn off the VCR

Press POWER

Reverse Forward

Reverse

2steps

Reverse

play

Reverse

slow

motion

2steps

Slow

motion

2steps

Normal

play

Forward

3steps

HR-S5901U-EN.fm Page 9 Friday, January 25, 2002 9:26 AM

— 10 —

Page 10 January 23, 2002 3:52 pm

Automatic operations after rewinding

— Next Function Memory

The Next Function Memory “tells” the VCR what to do after

rewinding is complete. Ensure that the VCR is in stop mode.

● For Automatic Playback Start

Press REW (

), then press PLAY (

) within 2 seconds.

● For Automatic Power Off

Press REW (

), then press POWER

within 2 seconds.

● For Automatic Timer Standby

Press REW (

), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if

the cassette’s record safety tab is removed.

Playing back tape repeatedly (100 times)

— Repeat Play

During playback, press and hold PLAY (

) for more than

5 seconds. The play indicator (

) on the display panel starts

blinking slowly. To stop playback, press STOP (

) on the Remote

or STOP/EJECT (

) on the VCR.

Locating beginning of recordings

— Index Search

Index codes are placed on the tape at the beginning of each

recording when recording on this VCR.

While the tape is not running, press SHUTTLE PLUS

on the Remote to start search.

To access a recording of 2 to 9 index

codes away, press

repeatedly until the correct number is

displayed on the screen (only if

“SUPERIMPOSE” is set to “ON”

(

墌

pg. 15)). Playback begins

automatically when the desired

recording is located.

Locating beginning of timer recordings

— Instant Review

After ensuring that the VCR is turned off and that the timer mode is

disengaged, press REVIEW.

● The VCR turns on, and rewinds to the index code indicating the

beginning of the last timer-recorded program, then begins

playback automatically.

● You can access a program of 2 to 9 index codes away from the

current position on the tape. If, for example, you have

5 programs recorded and you want to watch the third one, press

REVIEW three times.

● The Instant Review function will also operate if the VCR is

turned on.

Skipping unwanted portions

— Skip Search

Press SKIP SEARCH on the Remote once to 4 times during

playback. Each press initiates a 30-second period of high speed

playback (up to 2 minutes). When the specified portion of the tape

is skipped, normal playback resumes automatically. To return to

normal playback during Skip Search, press PLAY (

2nd next

Beginning of the

current program

recorded

Current

position on

the tape

Beginning of the

2nd next program

recorded

program

recorded

program

recorded

HR-S5901U-EN.fm Page 10 Wednesday, January 23, 2002 3:52 PM

—11—

Page 11 January 23, 2002 5:00 pm

It may be unlawful to record or play back copyrighted material

without the consent of the copyright owner.

Accidental erasure prevention

To prevent accidental recording on a

recorded cassette, remove its record

safety tab. To record on it later, cover

the hole with adhesive tape.

Basic Recording

Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with

adhesive tape before inserting the cassette.

● The VCR turns on, and the counter on the on-screen display is

reset, automatically.

Select recording channel

Press

CH+/–

or the

Number keys

on the Remote. Or push the

JOG

dial, then turn it to the left or right.

● If you connect the TV and the VCR only using the RF

connection, press

TV/VCR

on the Remote so that the VCR mode

indicator lights on the display panel, to view the program to be

recorded.

Set tape speed

Press

SP/EP

. The selected tape speed will appear on the TV screen.

NOTE:

You can select tape speed in the stop mode or during recording

pause mode.

Start recording

On the VCR, press

REC

(

). Or on the Remote, while holding

REC

(

), press

PLAY

(

NOTE:

If “VIDEO CALIBRATION” is set to “ON” (

墌

pg. 15) (default

setting), the VCR takes about 7 seconds to assess the quality of the

tape in use, then recording begins with the picture level

optimized.

NOTE:

If the tape reaches its end during recording, the recording stops

and “

䡬

” and “

” on the display panel blink. Press STOP/EJECT

(

) on the VCR to eject the cassette or press REW (

) on the

Remote to rewind the tape.

Recording Features

Specifying recording length

— Instant Timer Recording (ITR)

During recording, press

REC

(

) on the VCR repeatedly until the

recording length you want appears on the display panel. The

record indicator (

䡬

) on the display panel starts blinking.

● Each time you press the button, recording length increases in

30-minute intervals (up to 6 hours).

● The VCR shuts off after recording is finished.

● To cancel an ITR, press

STOP

(

) on the Remote or

STOP/EJECT

(

) on the VCR.

Watching one program while recording another

During recording...

● If you connect the TV and the VCR only using the RF

connection (

墌

pg. 5) to view pictures from the VCR, press

TV/

VCR

on the Remote so that VCR mode indicator goes off from

the display panel. (The TV broadcast being recorded

disappears.)

● If you are using the AV connection (

墌

pg. 5) to view pictures

from the VCR, change the TV’s input mode from AV to TV.

Then, select the channel you want to watch, on the TV.

Second Audio Recording

This VCR’s built-in MTS decoder enables reception of

Multichannel TV Sound broadcast. To record a SAP program

received, set “2ND AUDIO RECORD” to “ON” (

墌

pg. 15).

S-VHS (Super VHS), S-VHS ET or VHS Recording

Mode

This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS.

●

To record in S-VHS:

Set “S-VHS MODE” to “ON” (

墌

pg. 16). Then, insert a cassette

marked “S-VHS”. The S-VHS indicator lights up on the display

panel.

The S-VHS recording mode is selected.

●

To record in S-VHS ET on a VHS cassette:

Set “S-VHS ET” to “ON” (

墌

pg. 15). Then, insert a cassette

marked “VHS”. The S-VHS indicator lights up on the display

panel.

●

To record in VHS:

Insert a cassette marked “VHS”.

Set “S-VHS ET” to “OFF” (

墌

pg. 15).

●

To record in VHS on an S-VHS cassette:

Insert a cassette marked “S-VHS”. The S-VHS indicator lights up

on the display panel. Then, set “S-VHS MODE” to “OFF”

(

墌

pg. 16). The S-VHS indicator goes off.

The VHS recording mode is selected.

NOTE:

When playing back a tape that has been recorded in S-VHS or

S-VHS ET, the S-VHS indicator lights up on the display panel

regardless of the “S-VHS ET” or “S-VHS MODE” setting.

(

墌

pg. 15, 16)

Recording

During recording

Pause recording

Press

PAUSE

(

● Press

PLAY

(

) to resume recording.

● You can select channel in the recording pause mode.

Stop recording

Press

STOP

(

) on the

Remote.

Press

STOP/EJECT

(

) on

the VCR.

Record safety tab

HR-S5901U-EN.fm Page 11 Wednesday, January 23, 2002 5:00 PM

— 12 —

Page 12 January 23, 2002 3:52 pm

Up to 8 timer recording programs can be made using VCR Plus+

timer programing, Express timer programing or 24HR Quick

Programing method as far as a year in advance. Remember, the

clock must be set before you can program the timer.

NOTES:

● If all the 8 programs have already been set, “PROGRAM FULL”

or “Full” appears on the TV screen or the display panel.

● After timer recording is completed, the VCR turns off

automatically.

● You can program the timer recording while a regular recording

is in progress; the menu screens will not be recorded.

● To timer-record cable or satellite channels, perform “Cable Box

and/or DBS Receiver Control Setting” and be sure to keep the

cable box or DBS receiver turned on.

● Even if a power failure occurs, the VCR keeps your timer

programs. However, the clock time, channel settings, and other

menu settings are lost. As a result, when the power is supplied

again to this VCR after the power failure, this VCR starts the

Plug&Play setting automatically to restore the clock time and

channel setting. If the clock time and channel setting are

restored correctly, each timer program you have made will start

at its start time unless its end time has elapsed.

NOTE:

If the tape reaches its end during timer recording, the recording

stops and “

“, “

䡬

” and “

” on the display panel blink. Press

TIMER to disengage timer, then press STOP/EJECT (

) on the

VCR to eject the cassette or press POWER

then press REW

(

) on the Remote to rewind the tape.

Changing VCR Plus+

Setting

The VCR Plus+ programing system assigns a VCR Plus+ guide

channel to the TV channels and the cable channels. These guide

channel numbers are also called the VCR Plus+ channel codes.

Most TV listings have a section, usually a chart, indicating the

guide channel numbers assigned to each station.

To ensure that VCR Plus+ timer recording operates correctly, it is

necessary to set the VCR Plus+ “Guide Channel Set” for each

station.

If you have moved to a different area or if a broadcasting station’s

channel number has been changed, perform the following steps to

set the correct guide channel number.

Access Main Menu screen, then Initial Set screen

Press MENU on the Remote. Press

to move the highlight bar

(arrow) to “INITIAL SET”, then press OK or

Access Guide Channel Set screen

Press

to move the highlight bar (arrow) to “GUIDE

CHANNEL SET”, then press OK or

Input guide channel number

Press

or the Number keys to select the

VCR Plus+ guide channel number as

shown in the TV listing, then press OK or

Input receiving channel number

Press

or the Number keys to select the

number of the channel on which the guide

channel’s broadcasts are received, then

press OK or

● Repeat steps

and

for each instance.

Return to normal screen

Press MENU on the Remote.

VCR Plus+

Timer Programing

The PlusCode programing numbers are

the numbers next to the program in

most TV listing.

Load a cassette with the record safety

tab intact. The VCR turns on, and the

counter is reset, automatically.

Press PROG. on the Remote to access

the PlusCode No. screen.

Press the appropriate Number keys

to input the PlusCode number, then

press OK or

. Check to make sure the

setting is accurate on the Program screen.

● If the Guide Channel Set screen

appears after pressing OK, press the

Number keys, CH+/– or

to input

the number of the channel on which

the broadcast for the PlusCode

number is received on the VCR or

cable box, then press OK.

● To set the tape speed, press SP/EP.

● To change the stop time, press STOP+/–.

● To timer-record daily (Monday–Friday) or weekly serials,

press DAILY (M-F) (Number key “8”) or WEEKLY (Number

key “9”). Pressing the button again makes the “DAILY” or

“WEEKLY” display disappear.

● If you made a mistake, press CANCEL to access the PlusCode

No. screen again.

● If an incorrect PlusCode number or the one for a broadcast

already finished has been inputted, “ERROR” is displayed for

about 5 seconds, then the PlusCode No. screen reappears.

Press OK or PROG..

● If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”

appears, see “Program overlap warning display” (

墌

pg. 14).

Press TIMER. The VCR turns off automatically and “

” is

displayed on the display panel.

Timer Recording

GUIDE CHANNEL SET

GUIDE CH : 6

VCR CH : – – –

PRESS NUMBER KEY (0–9)

OR ( , ), THEN (OK)

PRESS (MENU) TO END

GUIDE CHANNEL SET

GUIDE CH : 6

VCR CH : 47

PRESS NUMBER KEY (0–9)

OR ( , ), THEN (OK)

PRESS (MENU) TO END

PLUSCODE NO.

PRESS NUMBER KEY (0–9)

PRESS (+/–) TO SET

EXPRESS PROGRAMMING

PRESS (PROG.) TO END

PROGRAM 1

(PLUSCODE NO. 12345678)

START STOP

8:00PM 10:00PM

DATE CH

12/24/02 12 SP

TUE

PRESS (8=DAILY, 9=WEEKLY

STOP+/– = STOP TIME, SP/EP)

PRESS (PROG.) TO END

PRESS NUMBER KEY (0–9)

THEN (OK)

PRESS (PROG.) TO END

12345678

PLUSCODE NO.

GUIDE CHANNEL SET

GUIDE CH : 12

VCR CH : – – –

PRESS NUMBER KEY (0–9)

OR ( , ), THEN (OK)

PRESS (PROG.) TO END

HR-S5901U-EN.fm Page 12 Wednesday, January 23, 2002 3:52 PM

—13—

Page 13 January 25, 2002 9:30 am

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns

on, and the counter is reset, automatically.

Press PROG. on the Remote to access the PlusCode No. screen.

Press START+/– once to access

Program screen.

Press START+/–, STOP+/–, DATE+/– or

CH+/– repeatedly to enter the start

time, stop time, date or channel.

● Press and hold START+/– or STOP+/–

to increase the time in 30-minute

intervals.

● To set the tape speed, press SP/EP.

● To timer-record daily (Monday–Friday) or weekly serials,

press DAILY (M-F) (Number key “8”) or WEEKLY (Number

key “9”). Pressing the button again makes the “DAILY” or

“WEEKLY” display disappear.

● If you are using a DBS receiver and

“DBS RECEIVER SET” is set to “ON”,

the band indication appears under

the channel number indication.

(Refer to “Cable Box and/or DBS

Receiver Control Setting” (

墌

pg. 7).)

TV: To timer-record a regular TV

broadcast received on the VCR.

CATV: To timer-record a cable TV broadcast received on the

VCR, or through a cable box (unless “CABLE BOX

SET” is set to “OFF”).

DBS: To timer-record a satellite broadcast received through

a DBS receiver.

If the channel number entered requires that the band be set

and “7=DBS” is displayed on the screen, press DBS (Number

key “7”) to select “DBS”.

Press OK or PROG..

● If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”

appears, see “Program overlap warning display” (

墌

pg. 14).

Press TIMER. The VCR turns off automatically and “

” is

displayed on the display panel.

24HR Quick Programing

You can program a timer recording that starts within 24 hours

using the JOG dial on the VCR.

Load a cassette with the record safety tab intact. The VCR turns

on, and the counter is reset, automatically.

Press 24HR QUICK PROGRAM on the VCR.

“

” starts blinking on the display panel.

Turn the JOG dial to the left or right to set

the start time.

● One click stop of the JOG dial changes

the time in 5-minute intervals.

Push the JOG dial. “

䡬

” starts blinking on

the display panel. Turn the JOG dial to the

left or right to set the stop time.

● To set the tape speed, press SP/EP. The

current setting for the tape speed appears

on the display panel for about 5 seconds.

Press SP/EP again to change the setting

while tape speed is displayed.

Push the JOG dial. Turn the JOG dial to the

left or right to select the channel, then press 24HR QUICK

PROGRAM. The VCR turns off automatically and “

” is

displayed on the display panel.

NOTES:

● If “Err” appears on the display panel, repeat the above steps

again.

● When a menu screen is shown, you cannot use 24HR Quick

Programing function. Press MENU to return to normal screen,

and try again.

● You can use 24HR Quick Programing function also when the

VCR is turned off.

● For 24HR Quick Programing function, the program overlap

warning display does not appear even if some programs overlap

each other.

To use the VCR while it is in timer recording standby

mode

Press TIMER, then press POWER

. After you use the VCR, press

TIMER again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

Disengage timer

Press TIMER, then press POWER

● When “AUTO TIMER” is set to “ON” (

墌

pg. 15), you do not

have to press TIMER.

Access Program Check screen

Press PROG. CHECK.

Access Program screen

Press PROG. CHECK again. Each time you

press PROG. CHECK, the next program’s

Program screen appears.

Cancel or change program setting

To cancel a program, press CANCEL when the Program screen you

do not want is shown.

To change a program, press the appropriate button: START+/–,

STOP+/–, DATE+/–, CH+/–, DAILY (M-F) (Number key “8”),

WEEKLY (Number key “9”), and/or SP/EP when the Program

screen on which you want to make changes is shown.

Return to normal screen

Press PROG. CHECK repeatedly until no Program screen is

shown.

Reengage timer recording standby mode

Press TIMER. The VCR turns off automatically and “

” is

displayed on the display panel.

● When “AUTO TIMER” is set to “ON” (

墌

pg. 15), the timer

recording standby mode automatically resumes when you turn

off the VCR.

PROGRAM 1

START STOP

– –:– –AM – –:– –AM

DATE CH

– –/– –/– – – – – SP

PRESS (+/–, SP/EP, 8=DAILY

9=WEEKLY), THEN (0K)

PRESS (PROG.) TO END

PROGRAM 1

START STOP

8:00AM 9:00AM

DATE CH

12/24/02 110 SP

TUE DBS

PRESS (+/–, SP/EP, 8=DAILY

9=WEEKLY, 7=DBS), THEN (0K)

PRESS (PROG.) TO END

Start time

Stop time

Channel number

PRESS (CHECK) TO NEXT

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

HR-S5901U-EN.fm Page 13 Friday, January 25, 2002 9:31 AM

—14—

Page 14 January 25, 2002 9:30 am

Program overlap warning display

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”

appears, you have another program overlapping the program you

have just made. The Program Check screen appears and

conflicting programs will start blinking.

Example:

Program 1 (you have just made) and Program 4 overlap each other

Select program to modify

Press

, then press OK or

● You can only select one of the

overlapping programs.

● If you do not mind this overlap, press

PROG. to finish the timer program

setting. The program starting earlier or

program with the lower program number will be recorded.

Cancel or change program setting

To cancel a program, press CANCEL when

the Program screen you do not want is

shown.

To change a program, press the

appropriate button: START+/–, STOP+/–,

DATE+/–, CH+/–, DAILY (M-F) (Number

key “8”), WEEKLY (Number key “9”) and/or SP/EP when the

Program screen on which you want to make changes is shown,

then press OK or

● If the overlap is not yet solved, the conflicting programs will be

shown on the Program check screen. Repeat the above steps

again.

Timer warning display

A warning appears on the TV screen to tell

you that the timer-recording is to start in

5 minutes if you are not in the timer

recording standby mode at that time. Press

TIMER to put the VCR into timer recording

standby mode. To clear the display, press CANCEL on the Remote.

Checking tape position

When you change the VCR operation

mode from the stop mode to fast forward

or rewind mode, or when you perform an

Index Search or Instant Review, the tape

position indicator appears.

The position of “

” in relation to “B” (Beginning) or “E” (End)

shows you where you are on the tape.

● Set “SUPERIMPOSE” to “ON” (

墌

pg. 15).

Changing display information

Each time you press DISPLAY, the display panel

shows the channel number and the clock time

alternatively.

● You can change display in the stop or recording

mode, or during rewind/fast-forward.

● When “SUPERIMPOSE” is set to “ON”

(

墌

pg. 15) and DISPLAY on the Remote is pressed, time

counter and tape remaining time will appear on the TV screen.

To reset the time counter, press C.RESET on the Remote.

Function settings

You can use the other useful function settings on the Function Set

screen.

Access Main Menu screen, then

Function Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to

“FUNCTION SET”, then press OK or

Select Function

Press

to move the highlight bar (arrow) to the function you

want to set.

Change setting

Press OK or

. The default setting is bold in the table below. Press

MENU to return to normal screen.

( , ) THEN ( ) (PROG.) : END

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

4 9:00P 10:00 10 12/24

PROGRAM NOT COMPLETED

PROGRAM OVERLAP

( , ) THEN ( ) (PROG.) : END

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

4 9:00P 10:00 10 12/24

PROGRAM 4

START STOP

9:00PM 10:00PM

DATE CH

12/24/02 10 SP

TUE

PRESS (CANCEL) TO CANCEL

PRESS (OK) TO CONFIRM

PRESS (PROG.) TO END

Other Functions

After a power failure occurs, Function Settings will be reset to

its default setting.

–WARNING–

TIMER RECORDING

TO START SOON

(CANCEL)

+++ E

REMAIN 1:00

COUNT – 1:23:45

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

FRONT AUX INPUT VIDEO

REAR AUX INPUT VIDEO

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

VIDEO STABILIZER OFF

BLUE BACK ON

2ND AUDIO RECORD OFF

AUDIO MONITOR HI-FI

S-VHS MODE ON

AV COMPU-LINK ON

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

FUNCTION

S-VHS ET

OFF

VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMER OFF

SUPERIMPOSE ON

AUTO SP

EP TIMER OFF

HR-S5901U-EN.fm Page 14 Friday, January 25, 2002 9:31 AM

—15—

Page 15 January 25, 2002 9:30 am

䡵

S-VHS ET

— ON/

OFF

When this function is set to “ON”, you can record on VHS

cassettes with S-VHS picture quality. Tapes recorded using this

function can be played back on a S-VHS VCR equipped with the

S-VHS ET function or VHS VCR equipped with the SQPB (S-VHS

QUASI PLAYBACK) function.

When this function is set to “ON”, the S-VHS indicator lights up

on the display panel.

NOTES:

● Before recording, set “VIDEO CALIBRATION” to “ON”.

(

墌

See below)

● You cannot activate the S-VHS ET function while recording,

timer-recording or Instant Timer Recording (

墌

pg. 11, 12) or

the “VIDEO CALIBRATION” function (

墌

See below) is in

progress.

● The S-VHS ET function does not work with S-VHS cassettes.

● To keep the highest quality recording and playback pictures over

a long period of time, S-VHS recording on S-VHS cassettes is

recommended.

● Use of high grade tapes is recommended for S-VHS ET

recordings. On some tapes, picture quality will not improve

even if the S-VHS ET function is used. Check the recording

quality before you start important recordings.

䡵

VIDEO CALIBRATION

—

/OFF

When this function is set to “ON”, this VCR checks the condition

of the tape in use during playback and recording, and

compensates to provide the highest-possible pictures. This takes

place whenever you play back a tape or start recording after

inserting a tape.

NOTE:

The VCR checks the tape condition for about 7 seconds, then

starts recording. To make sure you record the desired scene or

program completely, perform the following steps:

Press and hold PAUSE (

), and press REC (

). After about

7 seconds, the VCR re-enters Record Pause mode.

Press PLAY (

) to start recording.

䡵

PICTURE CONTROL

—

AUTO

(NORM)/EDIT/SOFT/SHARP

This function helps you to adjust the playback picture quality

according to your preference.

AUTO

(NORM)

: Normally select this. Picture quality is adjusted

automatically. When “VIDEO CALIBRATION” is “OFF”, “NORM”

will appear instead of “AUTO”.

EDIT

: Minimizes picture degradation during editing (recording and

playback).

SOFT

: Reduces image coarseness when viewing overplayed tapes

containing much noise.

SHARP

: Clearer, sharper-edged picture when viewing images with

much flat, same-colored surfaces such as cartoons.

NOTE:

Select “EDIT” when you are editing tapes. After you finish editing

the tapes, select “AUTO”.

䡵

AUTO TIMER

— ON/

OFF

● When this function is set to “ON”:

The timer recording standby mode is automatically engaged when

the VCR is turned off. It is temporarily canceled when the VCR is

turned on. You do not have to press TIMER to engage or disengage

the timer recording standby mode.

● When this function is set to “OFF”:

You have to press TIMER to engage or disengage the timer

recording standby mode.

䡵

SUPERIMPOSE

—

/OFF

When this function is set to “ON”, various VCR status information

(on-screen display) appears on the screen.

NOTE:

When you use this VCR as the playback VCR for editing a tape, be

sure to set this function to “OFF”; otherwise, the VCR status

information (on-screen display) will be recorded on the edited

tape.

䡵

AUTO SP

]

EP TIMER

— ON/

OFF

When this function is set to “ON”, the VCR automatically

switches to EP mode to allow complete recording if there is not

enough tape to record the entire program while timer-recording in

SP mode.

For Example, Recording a program of 140 minutes in length onto

a 120-minute tape

NOTES:

● If you have programed the VCR to timer-record 2 or more

programs, do not use this function, but change the tape speed

manually during timer programing.

● There may be some noise and sound disturbance where the tape

speed switches from SP to EP mode on the tape.

● This function is not available during ITR (Instant Timer

Recording), and will not work properly on the following tapes:

T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.

䡵

VIDEO STABILIZER

— ON/

OFF

When this function is set to “ON”, you can automatically correct

vertical vibrations in the picture when playing back unstable

recordings made on another VCR.

NOTE:

To watch recordings with close-caption or when you finish

viewing a tape, set this function to “OFF”.

䡵

BLUE BACK

—

/OFF

When this function is set to “ON”, the TV screen becomes all blue

when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals,

set this function to “OFF”.

䡵

2ND AUDIO RECORD

— ON/

OFF

● When this function is set to “ON”;

If a SAP program is received, the SAP audio is recorded on both

the normal and Hi-Fi tracks. The main audio is not recorded.

If a non-SAP program is received, the main audio is recorded on

both the Hi-Fi and normal tracks.

● When this function is set to “OFF”, the SAP audio cannot be

recorded.

NOTE:

When the channel is changed on the VCR;

● The “STEREO” indication appears on the screen for about

5 seconds if the program is a stereo broadcast.

● The “SAP” indication appears on the screen for about 5 seconds

if the program is a SAP broadcast.

● Both indications appear when a stereo program is accompanied

by SAP sound.

Approximately 110 minutes Approximately 30 minutes

SP mode EP mode

HR-S5901U-EN.fm Page 15 Friday, January 25, 2002 9:31 AM

— 16 —

Page 16 January 23, 2002 3:52 pm

䡵

AUDIO MONITOR — HI-FI/HI-FI L/HI-FI R/NORM/MIX

This VCR can record two sound tracks simultaneously (normal and

Hi-Fi) on a Hi-Fi stereo tape. You can select the sound track(s) to

listen to while playing back a Hi-Fi stereo tape. In addition, when

playing back a prerecorded tape containing two separate audio

programs on the Hi-Fi tracks, you can choose either one by

selecting either “HI-FI L” or “HI-FI R”.

HI-FI

: Normally select this. Hi-Fi sound is played back.

HI-FI L

: Sound on the left Hi-Fi channel is played back.

HI-FI R

: Sound on the right Hi-Fi channel is played back.

NORM

: Sound on the normal track is played back.

MIX

: Both sounds on the Hi-Fi track and normal track are mixed

and played back.

NOTES:

● While playing back a monaural tape, sounds on the normal

track will be heard regardless of this setting.

● If RF connection (

墌

pg. 5) is used for viewing pictures on the

TV, sound will be monaural even though you select “HI-FI”.

● You can also use the A.MONITOR button on the Remote to

select the desired monitor sound. (

墌

pg. 9)

䡵

S-VHS MODE — ON/OFF

You can determine which recording mode — either S-VHS mode

or VHS mode — is used for recording on S-VHS tapes.

● When this function is set to “ON”, you can record on S-VHS

tapes with S-VHS picture quality.

● When this function is set to “OFF”, you can record on S-VHS

tapes with VHS picture quality.

NOTES:

● S-VHS mode allows you to make high quality video recordings

with horizontal resolution of 400 lines, comparing with the 230

lines of resolution of conventional VHS recordings. To achieve

the highest quality picture we recommended to record in S-VHS

mode. (But remember that a conventional VHS VCR without

SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)

● S-VHS MODE setting does not affect recording on VHS tapes.

Recording on VHS tapes is always performed in VHS mode

except when using S-VHS ET mode (

墌

pg. 15).

䡵

AV COMPU-LINK — ON/OFF

The remote PAUSE/AV COMPULINK terminal on the rear panel

can be used as either the remote PAUSE terminal or the AV

COMPULINK terminal.

● When this function is set to “ON”, you can use this terminal as

the AV COMPULINK terminal. By connecting other JVC’s AV

COMPULINK components, including amplifiers (or receivers)

and televisions, one touch control of the audio and video

components linked via their AV COMPULINK connectors

becomes possible.

● When this function is set to “OFF”, you can use this terminal as

the remote PAUSE terminal. If your JVC camcorder is equipped

with the Master Edit Control, you can control the VCR from the

camcorder. Connect the mini-plug cable (not supplied with this

VCR) between the remote PAUSE terminal and the EDIT

connector on the camcorder.

NOTE:

Refer to the other components’ instruction manuals for connection

and its operations.

䡵

FRONT AUX INPUT — VIDEO/S-VIDEO

You have to select which terminal — either VIDEO (composite) or

S VIDEO (Y/C separate signals) to use as the video input terminal

on the front panel.

Make sure to select the correct terminal; otherwise, you may fail in

recording (editing) on this VCR.

䡵

REAR AUX INPUT — VIDEO/S-VIDEO

You have to select which terminal — either VIDEO (composite) or

S VIDEO (Y/C separate signals) to use as the video input terminal

on the rear panel.

Make sure you select the correct terminal; otherwise, you may fail

in recording (editing) on this VCR.

Satellite Auto Recording

You can automatically record a satellite program which is timer-

programed on your DBS receiver.

Connect a DBS receiver to the AUDIO/VIDEO IN connectors on

the rear panel. You can also connect the cable box if it has a timer.

Set timer program on DBS receiver referring to its instruction

manual.

Load a cassette with the record safety tab intact.

Press SP/EP to set the tape speed. The selected tape speed will

appear on the TV screen.

Press REC LINK for more than 2 seconds. The VCR turns off

automatically and enter the Satellite Auto Recording standby

mode (the REC LINK lamp lights). When signals come into the

VCR from the DBS receiver, the VCR starts recording (the REC

LINK lamp blinks), and stops recording and goes off when

signals stop coming in.

NOTES:

● Be sure not to turn on the DBS receiver before the program starts

broadcasting; otherwise, the VCR will start recording when the

DBS receiver is turned on.

● To disengage the Satellite Auto Recording standby mode, press

REC LINK (the REC LINK lamp goes off).

● Depending on the type of satellite receiver, Satellite Auto

Recording may not be compatible.

Child Lock

You can disable the VCR operations. While the VCR is turned on,

press and hold POWER

on the Remote

for more than

10 seconds. The VCR turns off, “CL” appears for about 5 seconds

on the display panel.

To release the child lock, press and hold POWER

on the

Remote until the VCR turns on.

NOTES:

● Pressing TIMER during timer recording, unplugging the AC

power cord or a power outage also releases the child lock.

● When the child lock function is in use, keep the Remote out of

the children’s reach.

● Timer recording programs will be performed even if the child

lock function activated.

HR-S5901U-EN.fm Page 16 Wednesday, January 23, 2002 3:52 PM

— 17 —

Page 17 January 23, 2002 3:52 pm

Multi-Brand Remote Control

This Remote can control some functions of remote controllable

TVs, cable boxes or DBS (Direct Broadcast Satellite) receivers

listed below. Without setting, you can control a JVC TV.

NOTES:

● Some unit’s brands have more than one code. If the unit does

not function with a specified code, try other codes.

● Depending on the type of unit, some or all functions cannot be

operated using this Remote.

● It is not possible to operate a unit not equipped with a remote

sensor.

● It is not possible to set the Remote for both your cable box and a

DBS receiver at the same time.

● Once you have set the Remote to operate the unit, you do not

have to set it until you replace the batteries from the Remote.

● If the batteries of the Remote are discharged, the Remote may

not be able to control the TV, cable box or DBS receiver.

Replace the batteries.

TV Brand Setting

Turn on TV

Turn on the TV using the Power button on the TV or its Remote.

Set TV brand code

Press and hold TV.

Press MBR SET.

Press the Number keys to enter your TV’s brand code.

Press OK, and release TV. The TV should turn off.

Operate TV

While holding down TV, press one of the following buttons:

POWER

, TV/VCR, TV CH+/–,

(TV Muting), TV VOL+/–,

and the Number keys.

● For some brands, you must press ENTER after having pressed the

Number keys to enter a channel number.

Cable Box or DBS Receiver Brand Setting

Turn on cable box or DBS receiver

Turn on the cable box or DBS receiver using the Power button on

the unit or its Remote.

Enter brand code

Press and hold CABLE/DBS.

Press MBR SET.

Press the Number keys to enter your cable box’s (or DBS

receiver’s) brand code.

Press OK, and release CABLE/DBS.

Operate cable box or DBS receiver

While holding down CABLE/DBS, press one of the following

buttons: POWER

, TV CH+/–, and the Number keys.

● For some brands, you must press ENTER after having pressed the

Number keys to enter a channel number.

● To change the cable box’s (or DBS receiver’s) channels, press TV

CH+/– or the Number keys. (The CH+/– button can be used to

change the VCR’s channels only.)

Changing Remote Control Code

This Remote is capable of transmitting two control codes; one set

to respond to A code control signals and another set to respond to

B code control signals. This Remote control is preset to send A

code signals because your VCR is initially set to respond to A code

signals. You can easily modify your VCR and the Remote to

respond to B code signals. When using two JVC VCRs, set two

VCRs and their Remotes to different codes, so that you can

operate these VCRs separately.

Set remote control code for Remote

Press and hold A/B.

Press the Number key “2”.

Press OK, and release A/B.

● The Remote now can transmit B code control signals.

Check remote control code for VCR

Press and hold

on the VCR for more than 5 seconds while the

VCR is turned off. The code currently set appears on the display

panel.

Change code for VCR

Press any key on the Remote. The VCR now responds to B code

control signals.

● To set the Remote and the VCR back to A code control signals,

repeat the same procedure as shown above except pressing the

Number key “1” in step

To control two VCRs with the same Remote

You can control two JVC VCRs by switching the remote control

code for the Remote between A and B (

墌

step A

A), keeping two

VCRs to different control codes.

● To change only the remote control code for the Remote, DO

NOT perform steps

B and C

TV BRAND CODE TV BRAND CODE

JVC

HITACHI

MAGNAVOX

MITSUBISHI

PANASONIC

RCA

SHARP

01, 03

04, 11

SONY

SAMSUNG

SANYO

SEARS

TOSHIBA

ZENITH

CABLE BOX BRAND CODE

ARCHER

CABLETENNA

CABLEVIEW

CITIZEN

CURTIS

DIAMOND

GC BRAND

GEMINI

GENERAL INSTRUMENTS

HAMLIN

JASCO

JERROLD

NOVAVISION

OAK

PANASONIC

PULSER

RCA

REGAL

REMBRANDT

SAMSUNG

SCIENTIFIC ATLANTA

SIGMA

SL MARX

SPRUCER

STARGATE

TELEVIEW

TOCOM

UNIKA

UNIVERSAL

VIDEOWAY

ZENITH

01, 05, 17

01, 17

15, 16, 17, 21, 25

01, 17

15, 16, 17, 21, 25

01, 04, 06, 11, 12, 15, 28

10, 18, 23

01, 04, 06, 11, 12, 15, 28

13, 14

15, 16, 17, 21, 25

13, 14

10, 18, 23

01, 16, 17

05, 16, 24

05, 16, 17, 24, 25

13, 14

05, 15, 16, 17, 21, 24, 25

05, 16, 24

01, 04, 16

01, 17

16, 17, 25

03, 09, 22

DBS RECEIVER BRAND CODE

JVC (DISH Network)

ECHOSTAR (DISH Network)

SONY (DSS)

RCA (DSS)

HR-S5901U-EN.fm Page 17 Wednesday, January 23, 2002 3:52 PM

— 18 —

Page 18 January 23, 2002 3:52 pm

Editing with Another VCR

You can use your VCR as the playback or recording VCR. You can

use a camcorder as the playback VCR and your VCR as the

recording VCR. Refer also to the other components’ instruction

manuals for connection and its operations.

Make connections

Example 1: When another VCR is VHS VCR

● If another VCR is monaural, connect this VCR’s AUDIO L IN (or

OUT) connector to the audio output (or input) connector on

another VCR.

Example 2: When another VCR is S-VHS VCR and when using

this VCR as the playback VCR

Example 3: When another VCR is S-VHS VCR and when using

this VCR as the recording VCR

Load cassettes

Insert the playback cassette into the playback VCR and the

cassette to be recorded on into the recording VCR.

Select input mode on recording VCR

Select the correct external input on the recording VCR.

On this VCR (when using this VCR as the recording VCR);

Select “L-1” — when connecting the other VCR to the audio/video

(or S-video) input connectors on the rear panel.

Select “F-1” — when connecting the other VCR to the audio/video

(or S-video) input connectors on the front panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Select video input connector on recording VCR

When using this VCR as the recording VCR, select the appropriate

mode depending on the connector being used (

墌

pg. 16).

When using S-VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “S-VIDEO”.

When using S-VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “S-VIDEO”.

When using VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “VIDEO”.

When using VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “VIDEO”.

Select edit mode

Set the edit mode to “ON” for the VCRs if such a mode is

equipped.

● On this VCR, set “PICTURE CONTROL” to “EDIT” (

墌

pg. 15).

Start playback

Press PLAY (

) on the playback VCR.

Start recording

Press REC (

) on the recording VCR.

Editing

To audio/video input

This VCR

Another VCR

To AUDIO/VIDEO IN

To AUDIO/VIDEO OUT

To audio/video output

When using this VCR

as the recording VCR,

connect this VCR’s

AUDIO/VIDEO IN

connectors to the

audio/video output

connectors on another

VCR.

When using this VCR

as the playback VCR,

connect this VCR’s

AUDIO/VIDEO OUT

connectors to the

audio/video input

connectors on another

VCR.

To S-video input

This VCR (for playback)

Another VCR (for recording)

S-video cable

(supplied)

To AUDIO OUT

To S-VIDEO OUT

Audio cable

(not supplied)

To audio input

To S-video output

This VCR (for recording)

Another VCR (for playback)

S-video cable

(supplied)

To AUDIO input

To S-VIDEO input

Audio cable

(not supplied)

To audio output

HR-S5901U-EN.fm Page 18 Wednesday, January 23, 2002 3:52 PM

— 19 —

Page 19 January 23, 2002 3:52 pm

Audio Dubbing

Audio Dubbing replaces the normal audio sound of a previously

recorded tape with a new soundtrack.

Make connections

Connect an audio cable between the VCR’s audio input

connectors and the audio component’s audio output connectors.

● When connecting a monaural audio component, use only the

VCR’s AUDIO L input connector.

● Audio Dubbing is possible by using the audio input connectors

on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the audio component to the

audio input connectors on the front panel.

Select “L-1” —when connecting the audio component to the

audio input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Locate start point, and engage Audio Dubbing mode

Load a cassette and press PLAY (

) on the VCR. Press PAUSE (

)

at the point where you want to start dubbing, then press A.DUB.

● The VCR enters the Audio Dubbing Pause mode. “

䡬

” blinks

and “

” lights on the display panel.

Start dubbing

Engage the Play mode of the audio component, then press PLAY

(

) on the VCR. Audio Dubbing begins at this point.

● To pause dubbing, press PAUSE (

). Press PLAY (

) to resume

dubbing.

End Audio Dubbing

Press STOP (

) on the Remote or STOP/EJECT (

) on the VCR,

then engage the Stop mode of the audio component.

NOTES:

● When monitoring the sound during Audio Dubbing, the normal

soundtrack is automatically selected. If you wish to hear the

Hi-Fi or mixed sound (Hi-Fi + normal soundtracks), press

A.MONITOR to select “NORM HI-FI”. (

墌

pg. 9, “Selecting

monitor sound”)

● Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the VCR enters the Play mode. Check the

counter reading on the screen before dubbing.

● Audio Dubbing is not possible with a cassette whose record

safety tab has been removed.

● When playing back an audio-dubbed tape, press A.MONITOR

to select the soundtrack you wish to hear. (

墌

pg. 9, “Selecting

monitor sound”)

Insert Editing and AV Dubbing

Insert Editing:

You can replace a recorded scene with new scene recorded on

another tape or with other material. Both the picture and the

sound recorded on the Hi-Fi sound track are replaced at the same

time.

AV Dubbing:

You can perform Audio Dubbing and Insert Editing at the same

time. This means that the picture and the sounds recorded on the

Hi-Fi sound track and on the normal track are replaced at the

same time.

● For AV Dubbing, you can edit pictures and sound using different

sources; connect a video source to the video input connector,

and an audio source to the audio input connectors.

Make connections

Connect an audio/video cable between the VCR’s audio/video

input connectors and the other component’s audio/video output

connectors.

● Insert Editing and AV Dubbing are possible by using the audio/

video input connectors on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the other component to the

audio/video input connectors on the front panel.

Select “L-1” —when connecting the other component to the

audio/video input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Various connection for editing tapes

The following three methods can be used for editing tapes.

● VHS to S-VHS editing (VIDEO-VIDEO connection):

Although the picture quality is inherently limited by the original

VHS quality, the edited tape has better picture quality than

those made by VHS-to-VHS editing.

● S-VHS to VHS editing (VIDEO-VIDEO connection):

Since the original source is recorded in S-VHS mode, the edited

tape has better picture quality than those made by VHS-to-VHS

editing.

● S-VHS to S-VHS (S-VIDEO connection):

Original picture quality of S-VHS made can be duplicated with

minimal picture degradation. This is the best editing method

you can use on S-VHS VCRs.

To AUDIO input

This VCR

CD player, etc.

To AUDIO output

To S-video output

This VCR (for recording)

Another VCR (for playback)

S-video cable

(supplied)

To S-VIDEO IN

To audio/video output

Audio/video cable

(not supplied)

To AUDIO/VIDEO IN

CONTINUED ON NEXT PAGE

HR-S5901U-EN.fm Page 19 Wednesday, January 23, 2002 3:52 PM

—20—

Page 20 January 25, 2002 9:33 am

Select video input connector

Select the appropriate mode depending on the connector being

used (

墌

pg. 16).

When using S-VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “S-VIDEO”.

When using S-VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “S-VIDEO”.

When using VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “VIDEO”.

When using VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “VIDEO”.

Select edit mode

Set the edit mode to “ON” for the VCRs if such a mode is

equipped.

●

On this VCR, set “PICTURE CONTROL” to “EDIT” (

墌

pg. 15).

Locate end point

Load the cassette to be edited into the VCR and press PLAY (4),

then press PAUSE (9) when you find the end of the scene for

which you want to edit.

Press C.RESET so that the counter reading becomes “0:00:00”.

Locate start point, and engage Insert Editing mode

Press REW (

), then press PAUSE (9) when you find the

beginning of the scene for which you want to edit, then press

INSERT.

●

The VCR enters the Insert Editing Pause mode. “

䡬

” and “$”

light on the display panel.

●

If you want to perform AV Dubbing and replace the picture,

Hi-Fi audio soundtrack and normal audio soundtrack all at the

same time, after you press INSERT, press A.DUB also.

Start editing

Load the source cassette and engage the Play mode of the other

component, then press PLAY (4) on the VCR. Insert Editing begins

at this point.

●

Insert Editing stops automatically when the counter reaches

“0:00:00”, and the VCR enters the Play mode.

To stop editing any time during recording

Press STOP (8) on the Remote or STOP/EJECT (0) on the

VCR, then engage the Stop mode of the other component.

NOTES:

●

Insert Editing is not possible with a cassette whose record safety

tab has been removed.

●

The recording speed (SP/EP) is determined by the previous

recording to be replaced. If the recording speed changes on the

tape to be edited while editing the tape, the inserted picture will

be distorted where the recording speed changes.

●

When you edit a tape, a small portion of the recording

preceding to the editing start point will be erased from the

edited tape.

Specifications shown are for SP mode unless specified otherwise.

E. & O.E. Design and specifications subject to change without

notice.

Specifications

GENERAL

Power requirement : AC 120 V

, 60 Hz

Power consumption

Power on : 17 W

Power off : 1.5 W

Tem pera tu re

Operating : 5°C to 40°C (41°F to 104°F)

Storage : –20°C to 60°C (–4°F to140°F)

Operating position : Horizontal only

Dimensions (W x H x D) : 435 mm x 94 mm x 247 mm

(17-3/16" x 3-3/4" x 9-3/4")

Weight : 2.8 kg (6.2 lbs)

Format : S-VHS/VHS NTSC standard

Maximum recording time

SP : 210 min. with ST-210 video cassette

EP : 630 min. with ST-210 video cassette

VIDEO/AUDIO

Signal system : NTSC-type color signal and EIA

monochrome signal, 525 lines/

60 fields

Recording/Playback

system

: DA-4 (Double Azimuth) head helical

scan system

Signal-to-noise ratio : 45 dB

Horizontal resolution

VHS : 230 lines

S-VHS : 400 lines

Frequency range

Normal audio : 70 Hz to 10,000 Hz

Hi-Fi audio : 20 Hz to 20,000 Hz

Input/Output : RCA connectors (IN x 2, OUT x 1)

S-video connectors (IN x 2, OUT x 1)

TUNER

Tuning system : Frequency-synthesized tuner

Channel coverage

VHF : Channels 2–13

UHF : Channels 14–69

CATV : 113 Channels

RF output : Channel 3 or 4 (switchable; preset to

Channel 3 when shipped) 75 ohms,

unbalanced

TIMER

Clock reference : Quartz

Program capacity : 1-year programmable timer/

8 programs

Memory backup for timer is not supported.

ACCESSORIES

Provided accessories : Infrared remote control unit,

“AA” battery x 2,

S-video cable (4-pin),

RF cable (F-type)

HR-S5901U-EN.fm Page 20 Friday, January 25, 2002 9:33 AM

Page is loading ...

JVC HR-5911U User manual

Brand: JVC

Model: HR-5911U

Category: Cassette players

Type: User manual

This manual is also suitable for

HRS5901U

Download PDF

report

JVC HR-5911U User manual

This manual is also suitable for

JVC HR-5911U User manual

Related papers

Other documents