2. Moons'
  3. TSM34P Series

Moons' TSM34P Series Quick Setup Manual

  • Hello! I am an AI chatbot trained to assist you with the Moons' TSM34P Series Quick Setup Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TSM
TSM34P Quick Setup Guide
Requirements:
You will need these items to setup the TSM34P:
• A 24-70VDC power supply
• A 12-48VDC auxiliary power supply (if needed)
• Asmallatbladescrewdriverfortighteningthe
connectors(included)
• APCrunningMicrosoftWindowsXP,orWindows7/8/10
withanRS-232serialcommunicationport,otherwisea
USBtoRS-232serialportconverterisneeded.
• Software:Step-ServoQuickTuner
• aprogrammingcable(included)
Step 1
Step 2
Install Software
• Downloadthe"Step-ServoQuickTuner"fromMOONS'website.
• Installthe“Step-ServoQuickTuner”softwareapplication.
• ConnectthedrivetothePCusingtheprogrammingcable.(See"CommunicationWiring"below)
• ChoosethecorrectCOMport.(See"ChoosingtheRightCOMPort"below)
• Runthesoftwareapplication.
• Applypowertothedrive.
• Thesoftwarewillcommunicatewiththedriveanddisplaythemodel&rmwareversion.
• Followthestepsinthe“Step-ServoQuickTuner”tosetup.
Connect the Power Supply
• Connectthemainpowersupply“+”terminaltothedrive”+”terminal&thepowersupply“-”terminaltothedrive“-”
terminalusing16to20-gaugewire.
• Connecttheauxiliarypowersupply“+”terminaltothedrive”AUX+”terminal&thepowersupply“-”terminalto
thedrive“AUX-”terminal
Becarefulnottoreversethewires.Reversingtheconnectionmayopentheinternalfuseandvoidthewarranty
• Ifaregulatedpowersupplyisbeingused,theremaybeaproblemwithregenerationthatcanbesolvedwiththe
useofaMOONS'RC880RegenerationClamp.SeeMOONS'websiteortheTSM34PHardwareManualformore
information.
NOTE:Whenusingtheoptionalauxiliarypowersupply,themainpowermustbeappliedpriortotheauxiliarypower.
• Onlyqualiedpersonnelshouldassemble,
install,operateormaintainthisequipment.
• Readallavailabledocumentationbefore
assemblyandoperation.
• Itisvitaltoensurethatallsystem
componentsareconnectedtoearthground.
• Thisproductcontainselectrostatically
sensitivecomponentsthatcanbedamaged
byincorrecthandling.
2016/02/06
RC880
TSM
V-
V+
AUX-
Vin
+
-
to Earth
Ground
Main Power Supply
24-70VDC
AUX Power Supply
12-48VDC
AUX+
V-
V+
V-
V+
Vout
+
-
Safety Instructions:
2016/02/06
Step 3
Configure the drive
a)Applypowertothedrive
b)Thesoftwarewillrecognizethedrive&displaythe
model&rmwareversion
c)Setupdrivecontrolmode,andcontrolmodesettings
d)SetupI/Ofunction
Headquarters
No.168MingjiaRoadIndustrialParkNorth
MinhangDistrictShanghai201107,P.R.China
Tel:+86(0)21-52634688
Fax:+86(0)21-62968682
Web:www.moonsindustries.com
E-mail:[email protected]
TSM34P
Quick Start Guide
Communication Wiring
RS-232 Communication
AllTSM34Pproductscomewitha1.5mcommunicationcable.Makesurethewiring
distancebetweentheTSM34PandthePCislessthan1.5m.
Connectthelargerconnector(DB9)ofthecabletothePCserialcommunicationport,
andthesmallersidetotheTSM34Pmotor(white4pinconnector).
NOTE:IfyourPCdoesnothaveanRS-232port,youwillneedaUSBtoserialport
converter.
PleasecheckMOONS'websiteforpurchaseinformation.
DonottrytopluginorremovethecommunicationcablewhendrivepowerisON.
a
c
b
d
Ifyouhaveanyquestionsorcomments,pleasecallMOONS'CustomerSupportat+86-4008209661,orvisitusonlineat
www.moons.com.cn.
GND
TXD
+5V
RXD
Openthe“DeviceManager”onthePC.IfthePChasanbuilt-inRS-232serialport,“Ports(COM&LPT)”will
bedisplayed.ConnectthePCanddrivewiththeincludedRS-232communicationcable.Choosetheconnected
COM(n)portintheStep-ServoQuickTunersoftware.
IfthePCdoesnothaveanRS-232serialport,aUSBtoRS-232serialportadapterwillbeneeded.
Openthe“DeviceManager”onthePC.Theremayormaynotbea"Ports”selection.Connecttheadapterto
thePC,thisUSBadapterCOMportshouldthenbedisplayed.ChoosethisnewCOM(n)portintheStep-Servo
QuickTunersoftware.
Choosing the Right COM Port
/