Ricon M132 Product Support Manual

RICOH Americas Corporation Content ID# 054904

Ver.2.0 Page 1 of 23 11/9/2012

Subject to change without notice

Product Support Guide

Model M132

Introduction

Model Type B/W Printer

Launch Date 11-12-2012

Serial Number

Prefix T42

Product Code M132

Brand/Model Name

Product Code Lanier Ricoh Savin

M132 SP 8300DN Aficio SP 8300DN SP 8300DN

Product Concept

Hardware

Productivity:

50ppm (A4,LT/LEF)

New features/functions:

Color of machine's outer frame changed to dark gray, in

accordance with New PDI design concepts.

4.3 inch LCD touch panel for easier machine operation

Note: From a hardware perspective,

This model is a fusion of the G179 and D129/D130.

Compared to these predecessor models, only minor changes

have been applied to the hardware and internal layout.

Connectivity/Software support

This is a Spring 2012 model, which has the same connectivity specification as Autumn 2011

models.

Security

There are no new security features.

Product Support Guide

Model M132

Ver.1.0 Page 2 of 23 11/9/2012

Subject to change without notice

Main Frame

Item Model Name EDP Code Notes

M132

Lanier

Ricoh

Savin

SP 8300DN

Aficio SP 8300DN

SP 8300DN

Comes Standard with

PS3

NOTE: Order Numbers are provided for reference purposes only. Please use your Pricing Guide for proper

order numbers to insure you receive the correct branding emblem.

Order Number

Options

Item Description EDP Code Product

Code Common / Unique Notes

IPDS Unit IPDS Unit Type 8300 407039 M416-00 U

Hard Disk

Drive Option

Hard Disk Drive Type

8300 407049 M416-10 U

Netware Option SD Card for Netware

Printing Type N 407047 M416-08 U

Java VM Card VM Card Type U 416163 D640-21 C (D131)

512MB

Memory Option

Memory Unit Type L

512MB 415806 D594-21 C (G179)

IEEE802.11a/g

Interface Unit

IEEE802.11a/g

Interface Unit Type J-L 403000 M344-01 C (D069)

IEEE 1284

Interface Board

IEEE 1284 Interface

Board Type A 411699 B679-17 C (D069)

Gigabit

Ethernet

Gigabit Ethernet Board

Type A 402547 G874-01 C (D069)

2 Tray Bank Paper Feed Unit

PB3130 415793 D580-17 C (D129)

1200 Sheet

LCT LCIT RT3020 415984 D631-17 C (D129)

1000 x 2 Sheet

LCT LCIT PB3140 415795 D581-17 C (D129)

Bridge Unit Bridge Unit BU3060 415988 D634-17 C (D129)

Product Support Guide

Model M132

Ver.1.0 Page 3 of 23 11/9/2012

Subject to change without notice

Item Description EDP Code Product

Code Common / Unique Notes

1000 Sheet

Finisher Finisher SR3090 415804 D588-17 C (D129)

3000 Sheet

Finisher Finisher SR3120 416008 D636-17 C (D129)

Punch Unit

(NA)

Punch Unit PU3030

NA 416325 D570-00 C (D129)

Output Jogger

Unit

Output Jogger Unit

Type 9002A 415903 B703-11 C (D131)

FAC56 Cabinet FAC56 Cabinet 416407 --- C (D129)

Supplies/Yields

Item Name Order Code Target Yield

ISO/IEC 3 P/J@5

%

Lanier

Toner Toner for LP150dn Black 820078/4800456 144K/4

carton

Maintenance Kit SP

8300A (PCU with

Developer)

Maintenance Kit SP 8300A

(PCU with Developer) 407057 160K

Maintenance Kit SP

8200B (Transfer

Belt Unit, Fuser

Unit)

Maintenance Kit SP 8200B (Transfer

Belt Unit, Fuser Unit) 402961 160K

Staple Type K for

SR3090 Staple Type K for SR3090 410801 1 x 5,000/Ctn.

Staple Type K Refill

for

SR3090/SR3120

Staple Type K Refill for

SR3090/SR3120 410802 3 x 5,000/Ctn

Ricoh

Toner Toner SP 8200A Black 820076 144K/4

carton

Maintenance Kit SP

8300A (PCU with

Developer)

Maintenance Kit SP 8300A (PCU with

Developer) 407057 160K

Maintenance Kit SP

8200B

(Transfer Belt Unit,

Fuser Unit)

Maintenance Kit SP 8200B

(Transfer Belt Unit, Fuser Unit) 402961 160K

Staple Type K for

SR3090 Staple Type K for SR3090 410801 1 x 5,000/Ctn

Staple Type K Refill

for

Staple Type K Refill for

SR3090/SR3120 410802 3 x 5,000/Ctn.

Product Support Guide

Model M132

Ver.1.0 Page 4 of 23 11/9/2012

Subject to change without notice

Item Name Order Code Target Yield

ISO/IEC 3 P/J@5

%

SR3090/SR3120

Savin

Toner Toner MLP150DN Black 820077/7913 144K/4

carton

Maintenance Kit SP

8300A (PCU with

Developer)

Maintenance Kit SP 8300A (PCU with

Developer) 407057 160K

Maintenance Kit SP

8200B

(Transfer Belt Unit,

Fuser Unit)

Maintenance Kit SP 8200B

(Transfer Belt Unit, Fuser Unit) 402961 160K

Staple Type K for

SR3090 Staple Type K for SR3090 410803/9858 1 x 5,000/Ctn

Staple Type K Refill

for

SR3090/SR3120

Staple Type K Refill for

SR3090/SR3120 410804/9859 3 x 5,000/Ctn.

Supply Yield Condition:

Starter Toner 36,000

Note: *Declared yield value in accordance with ISO/IEC 19752.

ACV 12K

Max CV 53K

1) ISO/IEC19752 & 3 page per job at 5% coverage is used to measure the above cartridge yields.

2) The condition is standard temperature and humidity.

3) This yield number may change depending on the circumstances and printing conditions.

4) Storage period for toner is 18 months.

5) Starter ink cartridge yield is ~400 prints, used primarily to initialize ink at installations.

The yield figures for the maintenance kits are based on the following conditions:

A4 (LT/SEF)

5% image coverage ratio

5 prints/job

6)

Note: The only change made to the Maintenance Kit A for the M132 was the color of the outer frame (changed to

dark gray).

Product Support Guide

Model M132

Ver.1.0 Page 5 of 23 11/9/2012

Subject to change without notice

Option Compatibility

1 2 3 4 5 6 7 8

1.

2 Tray Ban

k

X

2.

LCIT PB3140 X

3. LCIT RT3020 X

4.Bridge Unit M M M

5.

Finisher SR3090 M

6.500 sheet Finisher M

7.

Finisher SR3120 M M

8.

FAC56 Cabinet X M

X: Cannot be installed together

M: Must be installed together in RAC Market

Branding Information

Branding is required as the machines are shipped as a generic version.

Ricoh version machines: You must attach the model label (provided) to the front cover.

Savin/Lanier: You must attach the model label (provided) to the front cover and set the Plug and Play name with

SP 5-907.

Configuration

Main Frame Configuration

Product Support Guide

Model M132

Ver.1.0 Page 6 of 23 11/9/2012

Subject to change without notice

MFP Options

Key

: Symbol:

U

: Unique option,

C

: Option also used with other products

Item Callout Key

Machine Code

Main

Frame M132

[1]

-

M132

External

Options

Two-Tray Paper Feed Unit [ 2 ]

C

D580

2000-sheet LCT [3]

C

D581

1200-sheet LCT [4 ]

C

D631

Bridge Unit [5]

C

D634

1000-sheet Finisher (See Note 1) [ 6 ]

C

D588

3000-Sheet Finisher (See Note 1) [ 7 ]

C

D636

Punch Unit (See Note 2) -

C

D570-00 (2/3-hole)

(NA)

Punch Unit (See Note 2) -

C

D570-01 (2/4-hole)

(EU)

-Punch Unit (See Note 2) -

C

D570-02 (4-hole)

(Scandinavia)

Output Jogger Unit (See Note 2) [ 8 ]

C

B703

Internal

Options

HDD

-

U

M416

Memory Unit 512 MB -

C

D594

Product Support Guide

Model M132

Ver.1.0 Page 7 of 23 11/9/2012

Subject to change without notice

Item Callout Key

Machine Code

IPDS Unit

-

C

M416

VM Card

-

C

D640

Gigabit Ethernet -

C

M394 (NA)

IEEE 802.11a/g, g -

C

M344

IEEE 1284 -

C

B679

NOTE:

1. The finisher requires the bridge unit and two-tray paper feed unit or 2000-sheet LCT. The 1000- sheet finisher and 3000-sheet

finisher cannot be installed together.

2. The punch unit and output jogger unit requires the 3000-sheet finisher

Feature Comparison To Previous Version

M132 G179

Controller Type GW+ Controller GW Controller

USB2.0/SD Slot Standard Not supported

SMC data SD card down load or printing Printing only

Safety Shut Down Function Available Not Available

PDF Direct Standard Not supported

Data Overwrite Security Standard Option

HDD Encryption Standard Option

Continuous print

speed

Single-Side 50ppm/A4 50ppm/A4

Double-Side 50ppm/A4 50ppm/A4

First Print Speed Less than 3.5 sec Less than 3.5 sec

Resolution 600 x 600 dpi 600 x 600 dpi

PDL Standard PCL5e, PCL6 Adobe PS3 PCL5e, PCL6 Adobe PS3

RPCS

Option IPDS (IBM) IPDS

CPU 533MHz 533MHz

RAM Standard 512MB 256MB

Max 1GB 512MB

HDD 120GB (opt) 40GB (opt)

Operation Panel 4.3” Touch Panel 4-line LCD

10 Key

Preview Screen Before Printing Yes No

Product Support Guide

Model M132

Ver.1.0 Page 8 of 23 11/9/2012

Subject to change without notice

M132 G179

Paper Input

Standard 550 Sheets x 2 trays 550 Sheets x 2 trays

Bypass 100 Sheets 100 Sheets

Max Capacity 4,400 Sheets 4,400 Sheets

Option

550 Sheets x 2 trays 550 Sheets x 2 trays

2000 Sheets x 1tray 2000 Sheets x 1tray

1200 Sheets x 1 tray 1200 Sheets x 1 tray

Paper Output

Standard 500 Sheets 500 Sheets

Max Capacity 3500 Sheets 3500 Sheets

Option 1000 Sheet Finisher 1000 Sheet Finisher

3000 Sheet Finisher 3000 Sheet Finisher

Paper Thickness

Standard 60—216 gsm 60—216 gsm

Bypass 52—220 gsm 52—220 gsm

Option 60—216 gsm 60—216 gsm

Double-Sided 52—169 gsm 52—169 gsm

Eco Night Sensor Yes No

Auto Off/On Timer Yes No

TEC value Less than 3.65Kwh 3.99kWh (NA)

Warm-up time Less than 25 sec Less than 25 sec

Recovery from sleep mode Less than 15 sec Less than 15 sec

Security

Mandatory hold print (w/opt HDD)

Changing print settings on panel (w/opt HDD)

Unauthorized copy control

No

Weight 160.9lbs (73kg) 160.9lbs (73kg)

Installation

Installation Requirements

Temperature Range: 10° C to 32° C (50° F to 90° F).

Humidity Range: 15% to 80% RH.

Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight).

Ventilation: Room air should turn at least 30 m3/hr/person.

Ambient Dust: Less than 0.10 mg/m3 (2.7 x 10/6 oz/yd3).

Avoid areas exposed to sudden temperature changes:

Areas directly exposed to cool air from an air conditioner.

Areas directly exposed to heat from a heater.

Do not place machine where it will be exposed to corrosive gas or vapor.

Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.

Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2”).

Do not place the machine where it may be subject to strong vibrations.

Machine level

• Front to back: within 5mm (0.2”) of level.

• Right to left: within 5mm (0.2”) of level.

Product Support Guide

Model M132

Ver.1.0 Page 9 of 23 11/9/2012

Subject to change without notice

Power Requirements

Input voltage level: 110 - 127 V, 60Hz:more than 12A.

Do not place anything on power cord.

The required wall outlet is a NEMA 5-15R (receptacle).

Space

Foot Print

A(Front) Over 750 cm (29.6”)

B(Left) 10 cm (4")

C (Rear) 10 cm (4")

D (Right) 55 cm (21.7")

The 75 cm (29.6” recommended for the space at the

front is for pulling out the paper tray only. If the

operator stands at the front of the main machine more

space is required.

Dimensions (W x D x H): 670 x 684 x 641 mm (26.38” x 26.93” x 25.24”)

NOTE:

Measurement Conditions: printer only

Product Support Guide

Model M132

Ver.1.0 Page 10 of 23 11/9/2012

Subject to change without notice

Power Consumption / Noise Emission

Power Consumption

Power consumption BTU/hr

Max 1550W or less 5288.82

Energy Saving 3.5W or less 11.94

Noise Emission

Main Unit Compete System

Stand by Less than 48db (Guaranteed Value) Less than 48db (Guaranteed Value)

Printing Less than 72db (Guaranteed Value) Less than 76db (Guaranteed Value)

NOTE: The above measurements were made in accordance with ISO

7779. The measurements were taken from the normal position of

the operator.

Sound Pressure Level Bystander

Main Unit Compete System

Stand by Less than 42db (Guaranteed Value) Less than 42db (Guaranteed Value)

Printing Less than 66db (Guaranteed Value) Less than 70db (Guaranteed Value)

Installation Times

Unit

Installation

Time

(Minutes)

Unit Installation Time

(Minutes)

Bridge Unit

BU3060

10

IPDS Unit Type 8300

5

Paper Feed

Unit PB3130

10

VM CARD Type U

5

LCIT PB3140

(2000 sheets)

10

Memory Unit Type L

512MB

5

LCIT RT3020

(1200 sheets)

10

Gigabit Ethernet Board

Type C for NA

5

Finisher

SR3090 (1000

sheets)

10

Hard Disk Drive Option

Type 8300

5

Finisher

SR3120 (3000

sheets)

15

IEEE802.11a/g

Interface Unit Type L

5

Punch Unit

PU3030

15

IEEE1284 Interface

Board Type A

5

Output Jogger

Unit Type 9002A

15

Product Support Guide

Model M132

Ver.1.0 Page 11 of 23 11/9/2012

Subject to change without notice

Storage/Transportation

Storage Transportation

Mainframe

-30

℃

to 40

℃

(22

o

F to 104

o

F) 15%

～

85%RH -30

℃

to 50

℃

(22

o

F to 122

o

F ) 15%

～

95%

Toner*

Under 50

℃

(122

o

F) 15%

～

80%RH Under 50

℃

(122

o

F )15%

～

80%RH

NOTE:

Remarks for Toner:

* Store in a dry, dark place where temperature does not exceed 45

℃

on continuance storage/transportation

conditions.

* Do not store more than 12 hours under the temperature between 41 and 50

℃

.

* Do not store more than a month under the temperature between 36 and 40

℃

.

* Do not store more than 2 years under the temperature between 10 and 32

℃

.

* Ideal temperature of toner use is between 10

℃

and 32

℃

*The definition of "Storage Period" : Starting from the timing of manufactured. The item must be unopened.

Parts / Special Tools / Maintenance

PM Parts / Yields

Mainframe

Unique/Common

U:

Unique for this model

C:

Common with listed model

*1PCU Service Ass’y M1322100

*2 Development section ass’y G1792303

*3 Transfer Unit ass’y G1793802

*4 Fusing Unit NA M1324102

Part Number Description Q’ty/

Unit PM Interval Unique or

Common

Around the drum

AD027012

*

1

Charge Roller 1 160K C (G147)

G7902329

*

1

Brush Roller – Cleaning 1 160K C (G147)

AD025021

*

1

Pick-off Pawl 2 160K C (G147)

D0092351

*

1

Cleaning Blade 1 160K C (G147)

D0099510

*

1

OPC Drum 1 160K C (G147)

Development

D0093086

*2

Development Filter 1 160K C (G147)

B2969640

*2

Developer Black 1 320K C (G147)

Transfer Belt Unit

A2323880

*3

Transfer Belt 1 160K C (G147)

AD041135

*3

Cleaning Blade - Transfer Belt 1 320K C (G147)

Fusing Unit

AE011132

*4

Hot Roller 1 160K C (G147)

AE020199

*4

Pressure Roller 1 160K C (G147)

AE044099

*4

Hot Roller Stripper 7 320K C (G147)

D0094177

*4

Fusing Thermistor (Center and

End)

1 160K C (G147)

Product Support Guide

Model M132

Ver.1.0 Page 12 of 23 11/9/2012

Subject to change without notice

Part Number Description Q’ty/

Unit PM Interval Unique or

Common

AE045099

*4

Cleaning Web 1 160K C (G147)

AE040099

*4

WEB Holder Roller 1 320K C (G147)

B0654247

*4

Brake Pad 1 320K C (G147)

Special Tools & Lubricants

Item Part Number Description Q’t

y

Unique or Common

1 A2309003 Adjustment Cam – Laser Unit 1 C (General)

2 B6455010 SD Card 128MB 1 C (General)

3 B6455020 SD Card 1GB 1 C (General)

4 G0219350 Loop Back Connector: Parallel

*Note 1

1 C (General)

5 A2579300 Grease Barrierta –S552R 1 C (General)

6 52039502 Silicon Grease G501 1 C (General)

7 B6795100 Plug - IEEE1284 Type C 1 C (General)

8 ---

Ricoh System Information Tool

(Support Tool Version 2)

- Basic version

- Mail version

- Rlogtool

(for use with GW controller)

1 C (General)

Note 1: Loop-back Connector – Parallel (item 4) requires Plug - IEEE1284 Type C (item 7).

Note 2: A PC (Personal Computer) is required for creating the Encryption key file to an SD card when replacing

the controller board for a model in which HDD encryption has been enabled.

Target Reliability

Model

Average Monthly Volume

12K ppm

Max. Monthly Volume

53K ppm

PM Interval

160K

Specifications / Documentation

M132

Speed

Print Speed 50ppm (A4/LT LEF)

Product Support Guide

Model M132

Ver.1.0 Page 13 of 23 11/9/2012

Subject to change without notice

M132

First Print 3.5 sec or less (A4/LT LEF)

Warm-up 25 sec or less

Controller

Spec

Processor RM7035C-533L 533MHz

Memory STD/MAX STD: 512MB MAX: 1024MB

HDD 120GB (Option)

Resolution 600/300/200 dpi

Interface STD USB2.0(TypeA 2port & B) , Ethernet(100BASE-

TX/10BASE-T)

Option IEEE1284/ECP, IEEE802.11a/b/g, Gigabit

Ethernet

Language PCL5e/6, PostScript3, PDF direct print, Media print (JPEG/TIFF), IPDS

(Option)

Font PCL:45 fonts + International Fonts 13 fonts

PostScript3/PDF: 136 fonts

IPDS: 108 fonts (Option)

Operating Systems Windows XP/ Vista/ Server 2003/ Server 2008/ 7 (32bit)

Windows XP/ Vista/ Server 2003/ Server 2008/ Server2008R2/ 7

(64bit)

CPS-4.5 (32/64bit)/ XenApp 5.0 (32/64bit), 6.0 (32/64bit)

Mac OS X(Native), 10.4-107 or later

Network Protocols TCP/IP (IPv6), IPX/SPX (option), Bonjour

Security

Feature

Authentication Windows

Authentication

Yes

LDAP

Authentication

Kerberos

Yes

Yes *Not SASL Authentication but simple

Authentication is supported.

Basic

Authentication

Yes

User Code

Authentication

Yes

802.1.x Wired

Authentication

Yes

Wireless Security WEP, WPA, WPA2

Paper

Input Paper Capacity (80g/m2,

bond 20lb)

Std Tray 1,100 sheets (550 x 2 trays)

Bypass 100 sheets

Option 2 Tray

Bank

1,100 sheets (550 x 2 trays)

LCIT #1 2,000 sheets (1,000 x 2 trays)

LCIT #2 1,200 sheets

Paper Size Std Tray Auto detection: A3 SEF, A4 SEF/LEF, A5 LEF, B4

SEF, B5 SEF/LEF, DLT SEF, Legal SEF, LT

SEF/LEF, Executive LEF

Manual setting: Foolscap SEF, Government LG

SEF, Folio SEF, F/GL SEF, G LT SEF/LEF, Eng

Quatro SEF, Executive SEF, Com10 LEF, C5 LEF,

DL Env LEF, 11"x15", 11"x14", 10"x15", 10"x14"

Bypass Auto detection: A3 SEF, A4 SEF/LEF, A5

SEF/LEF, A6 SEF, DLT SEF, LT SEF/LEF, HLT

SEF

Manual setting: B4 SEF, B5 SEF/LEF, B6 SEF,

Product Support Guide

Model M132

Ver.1.0 Page 14 of 23 11/9/2012

Subject to change without notice

M132

Legal SEF, Foolscap SEF, Government LG SEF,

Folio SEF, F/GL SEF, G LT SEF/LEF, Eng Quatro

SEF/LEF, Executive SEF/LEF, Com10 SEF/LEF,

Monarch SEF/LEF, C5 SEF/LEF, C6 SEF/LEF, DL

env SEF/LEF, 12"x18", 11"x15", 11"x14", 10"x15",

10"x14"

Option 2

Tray

Bank

Auto detection: A3 SEF, A4 SEF/LEF,

A5 LEF, B4 SEF, B5 SEF/LEF, DLT

SEF, Legal SEF, LT SEF/LEF,

Executive LEF

Manual setting: Foolscap SEF,

Government LG SEF, Folio SEF, F/GL

SEF, G LT SEF/LEF, Eng Quatro SEF,

Executive SEF, Com10 LEF, C5 LEF,

DL Env LEF, 11"x15", 11"x14", 10"x15",

10"x14"

LCT A4 LEF, LT LEF

LCIT A4 LEF, B5 LEF, LT LEF

Paper Handling Std/Option Tray 60-216g/m2 20lb bond

Bypass 52-216g/m2 20 lb bond

Duplex 60-169g/m2 20 lb bond

Paper Type Std Tray Plain Paper, Recycled Paper, Color

paper, Special Paper 1-3, Letterhead,

Preprinted, Prepunched, Bond paper 1-

2, Back side of Thick paper 1-2,

Envelopes,

Bypass Tray Plain Paper, Recycled Paper, Color

paper, Special Paper 1-3, Letterhead,

Preprinted, Prepunched, Bond paper 1-

2, Back side of Thick paper 1-2, Labels,

Envelopes,

2 Tray Bank Plain Paper, Recycled Paper, Color

paper, Special Paper 1-3, Letterhead,

Preprinted, Prepunched, Bond paper 1-

2, Back side of Thick paper 1-2,

Envelopes,

LCT/LCIT Plain Paper, Recycled Paper, Color

paper, Special Paper 1-3, Letterhead,

Preprinted, Prepunched, Bond paper 1-

2, Back side of Thick paper 1-2

Output Paper Capacity Face

Down

Main Unit 500 sheets (A4/LT) , 250 sheets (B4/LG)

Bridge

Unit

250 sheets (A4/LT) , 125 sheets (B4/LG)

3,000

sheets

Finisher

(Incl.

Bridge

Unit)

3,500 sheets

Product Support Guide

Model M132

Ver.1.0 Page 15 of 23 11/9/2012

Subject to change without notice

MFP Supported Environments

Windows Environments

OS Type PCL5e PCL6 PostScript3 XPS

Windows XP

Professional Y Y Y N

Home Edition Y Y Y N

Windows Server 2003

Standard Edition Y Y Y N

Enterprise Edition Y Y Y N

Datacenter Edition N N N N

Web Edition N N N N

Windows Server 2003

R2

Standard Edition Y Y Y N

Enterprise Edition Y Y Y N

Datacenter Edition N N N N

Web Edition N N N N

Windows VISTA

Home Basic Y Y Y Y*

Home Premium Y Y Y Y*

Business Y Y Y Y*

Enterprise Y Y Y Y*

Ultimate Y Y Y Y*

Windows Server 2008

Standard Edition Y Y Y Y

Enterprise Edition Y Y Y Y

Datacenter Edition N N N N

Web Edition N N N N

Windows Server 2008

R2

Standard Edition Y Y Y Y

Enterprise Edition Y Y Y Y

Datacenter Edition N N N N

Web Edition N N N N

Windows 7

Starter N N N N

Home Basic N N N N

Home Premium Y Y Y Y

Professional Y Y Y Y

Enterprise Y Y Y Y

Ultimate Y Y Y Y

*SP1 or later is recommended

Point & Print

Windows Environments

Server Client (Push to) PCL5e PCL6 PostScript3 XPS

Windows Server

2003/2003 R2

7 Y Y Y N

Vista Y Y Y N

XP Y Y Y N

W2K Pro N N N N

Windows Server 2008/

2008 R2

7 Y Y Y Y

Vista Y Y Y Y

XP Y Y Y N

W2K Pro N N N N

Windows Server 2000

7 Y Y Y N

Product Support Guide

Model M132

Ver.1.0 Page 16 of 23 11/9/2012

Subject to change without notice

Windows Environments

Professional Server &

Advanced Server

Vista Y Y Y N

XP Y Y Y N

W2K Pro N N N N

Windows XP

Professional

7 Y Y Y N

Vista Y Y Y N

XP Y Y Y N

W2K Pro N N N N

Windows Vista

7 Y Y Y Y

Vista Y Y Y Y

XP Y Y Y N

W2K Pro N N N N

Terminal Service & Citrix MetaFrame

Server Driver

PCL5e/6 PS

Windows Server 2008

Y Y

Windows Server 2008 R2

Y Y

Windows Server 2003

Y Y

Windows Server 2003 R2

Y Y

Windows Server 2002

N N

Windows 2003 + MetaFrame

N N

Win 2000 Server + MetaFrame

N N

Win 2003 Servers: Citrix

PresentationServer4.0

N N

Win 2000 Servers: Citrix

PresentationServer4.0

N N

Win 2003 Servers: Citrix

PresentationServer4.

Y Y

Win Server 2008 + XenApp5.0

Y Y

Win Server 2008 R2+ XenApp6.0

Y Y

Win server 2008 R2 + XenApp6.5

Y Y

*RPCS driver has been discontinued.

*XPS driver is not supported in the environment of terminal service and Citrix MetaFrame.

*Even "Yes" is put in the cell, there is a case driver is not supported under the combination of FR and Service Pack of Meta Frame.

*Following combinations of operating system and Citrix MetaFrame are supported.

Windows 2003 Server

1.Windows Terminal Service (RDP protocol)

2.Citrix PresentationServer4.5

Windows 2008 Server

1. Windows Terminal Service (RDP protocol)

2. Citrix XenApp5.0

Windows 2008R2 Server

1. Windows Terminal Service (RDP protocol)

2. Citrix XenApp6.0

3. Citrix XenApp6.5

Product Support Guide

Model M132

Ver.1.0 Page 17 of 23 11/9/2012

Subject to change without notice

Mac OS

PostScript3 Printer Utility for MAC

Mac OS 8.6 or later, Mac OS X classic

N N

Mac OS X Native : v. 10.4 ~ 10.7 or later

Y N

UNIX Filter

Unix Platforms Version

Sun Solaris

2.6 / 7 / 8 / 9 /10

HP-UX

10.x / 11.x / 11iv2/11iv3

Red Hat Linux

Enterprise 4/5/6

SCO OpenServer

5.0.6 /5.0.7/6.0

IBM AIX

5L Version 5.3/6.1/7.1

Novell Netware

Netware Server

Supported Version Netware 6.5

Client

Supported OS Windows XP professional/Vista/2003/2008/7

* Netware option is required.

SAP/R3 Environment (Device Type / Barcode & OCR Package)

Device Type will be provided from SAP itself in SAP Printer Vendor Program.

Supported Barcode & OCR

Fonts*

Barcode Fonts Code 128, Code 39, Code 93, Codabar, 2 of 5

interleaved/Industrial/Matrix, MSI, USPS, UPC/EAN

OCR Fonts OCR A, OCR B

Utility Software

Software Description

Smart Device Monitor for Admin This software enables you to manage and monitor printers and other

devices over the network.

DeskTopBinder – SmartDeviceMonitor

for Client

This software enables you to access networked printers to print,

monitor or to receive notifications. With DeskTopBinder Lite you can

connect client computers to I/O devices enabling you to efficiently

manage data.

Device Graphic Update Module

Device Graphic Update Module provides bitmap images used to represent

the various statuses of devices graphically within Smart Device Monitor or

Web Smart Device Monitor. Available on website.

PS Descriptions

PPD for Mac By interacting with the Adobe PostScript 3 controller in

the device, this PPD is able to produce an accurate representation

of the screen image.

Mac OS X PPD Installer

This PPD installer is used to install a PPD (Postscript Printer

Description) file on Mac OSX. PPD files contain descriptions of

printer capabilities such as paper sizes, number of input trays and

duplexing. Once the PPD file is installed on the system using the

PPD installer, the PS driver that comes bundled with Mac OS X can

Product Support Guide

Model M132

Ver.1.0 Page 18 of 23 11/9/2012

Subject to change without notice

Software Description

use the information in the PPD to control the print device and enable

full functionality. It supports the Mac OS X 10.1 or later. Please see

the Readme file for information about compatibility with versions of

Mac OS X.

PCL 6 Driver

Printer driver for B/W printing in Windows. It supports HP PCL XL

commands and is optimized for the Windows GDI. High

performance printing can be expected.

PCL 5e Driver Printer driver for printing in Windows. It supports HP PCL 5e

commands.

Post Script Driver

By interacting with the Adobe PostScript 3 controller in the device,

this driver is able to produce an accurate representation of the

screen image.

Print Driver Information

Model PCL 6 PCL

5e

PostScript3 XPS

Windows

XP/Vista/7

Mac OS

X

(Native),

10.4-10.7

or later

Job Binding N N N N N

Send to Document Server N N N N Y*1

Sample Print Y*1 Y*1 Y*1 Y*4 Y*1

Locked Print Y*1 Y*1 Y*1 Y*4 Y*1

Hold Print Y*1 N Y*1 Y*2*4 N

Schedule Print Y*1 N Y*1 Y*2*4 N

Stored Print Y*1 Y*1 Y*1 Y*4 Y*1

Stored Print (Shared) Y*1 Y*1 N N N

Store and Print N N N N N

Store and Print(Shared) N N N N N

Stored & Normal Print Y*1 Y*1 Y*1 Y*4 Y*1

Stored & Normal (Shared) Y*1 Y*1 N N N

Mask Type for Copying Y N Y N N

Data Security for Copying Y N Y N N

Encryption/Encoding Y Y N N N

Reduce/Enlarge (Scaling) Y Y*3 Y Y Y

Reduce/Enlarge Centering Y*3 N N N N

Fit to Paper size Y Y Y Y N

Collate Y Y Y Y Y

Custom Media Type Y Y N N N

Layout (N-up) Y Y Y Y Y

Poster Y N N N N

Duplex Y Y Y Y Y

Punch Y Y Y Y Y

Staple Y Y Y Y Y

Cover sheet(Front Cover) Y Y N N N

Front and Back Cover Y Y N N N

Product Support Guide

Model M132

Ver.1.0 Page 19 of 23 11/9/2012

Subject to change without notice

Model PCL 6 PCL

5e

PostScript3 XPS

Windows

XP/Vista/7

Mac OS

X

(Native),

10.4-10.7

or later

Slip Sheet Y Y N N Y

Chaptering (Page Layout) Y Y N N N

Chaptering (Single Page Insert) Y Y N N N

Chaptering(Page Block Insert) Y Y N N N

User Defined Pages N Y N N N

Tab Stock Printing N N N N N

Mirror Image Print N N Y N N

Negative Image Print N N Y N N

Dithering N N Y Y N

Edge Smoothing Y Y Y Y N

Toner Saving Y Y Y Y Y

Black Over Print N N N N N

Gray Reproduction N N N N N

CLP Color Simulation N N N N N

Watermark Y Y Y Y N

Unauthorized Copy Control Y Y Y Y N

Form Overlay N N N N N

Header/Footer N N N N N

Adjust image position N N N N N

Binding Margins N N Y N N

User ID Y Y Y Y Y

User Code Y Y Y Y Y

Billing Code Y Y N N N

User Authentication Y Y N N N

Classification Code Y Y N N N

Limitation setting N Y N N Y

Rotate Print Y Y Y Y Y

Reverse Order Print Y N Y Y Y

Do not print Blank pages N N N N N

Banner Page Print Y Y Y Y N

Edge to Edge Print Y Y Y Y N

Y: supported

N: not supported

*1: HDD is required

*2: This function is available on Mac OS 10.5 or later.

*3: "Centering" feature cannot be selected from PCL driver. However PCL has this feature as the original function. When printing with

Reduce/Enlarge(Zoom) feature of PCL driver, the output will be automatically centered by the PCL's original centering function

*4:If HDD is not installed on printer, this function can be selected from PS(Mac) driver, but the print job will be cancelled when printing with this function.

Product Support Guide

Model M132

Ver.1.0 Page 20 of 23 11/9/2012

Subject to change without notice

Other MFP Support Information

Not Applicable

Counters



User Tools / Printer Features / List/Test Print / Configuration page / unit prints the

configuration page and the total counter in on the top right



If SP 5-930-001 is set to ON (1), UT / Counter / it will display counter. To print counter

select start. It will print the counter page



Maximum 8 digits

Paper

Recommended Throughput Material

Not Applicable

Non Recommended Throughput Material

Refer to pages in the Operators Instructions Hardware Guide.

Do not use any of the following kinds of paper or a fault might occur:

• Aluminum Foil, Carbon paper,

• Conductive paper

• Paper meant for an inkjet printer

• Bent, folded, or creased paper

• Torn paper

• Thermal fax paper

• Art paper

• Paper with perforated lines

• Hemmed-edge paper

• Tab stock

• Slippery paper

• Perforated paper

• Rough paper

• Thin paper with little stiffness

• Paper with a dusty surface

Special Paper

Not Applicable

Page is loading ...

Ricon M132 Product Support Manual

This manual is also suitable for

Ricon M132 Product Support Manual

Other documents