Moen 2521 Specification

Category
Sanitary ware
Type
Specification

This manual is also suitable for

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
Pressure balancing valve design with 1/2" CC/IPS connections,
with 2 or 3 function transfer valve
2 function = 2 discrete outputs
3 function = 2 discrete and 1 shared output
OPERATION
Temperature operates through an 270˚ arc of handle travel
(full cold to full hot)
Adjustable temperature limit stop to control maximum hot
water temperature
90˚ rotation of transfer valve handle with stops
Pressure balancing mechanism maintains selected discharge
temperature to ± 3˚
CARTRIDGE
1222 cartridge design
STANDARDS
Third party certied to meet ASME A112.18.1/CSA B125.1,
ASSE 1016, and all applicable requirements referenced therein
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
POSI®
VALVE
3-Function Built In Transfer Valve
Models: 2521 POSI-TEMP W/2F DIVERTER CC/IPS
2551 POSI-TEMP W/3F DIVERTER CC/IPS
2571 POSI-TEMP W/STOPS W/2F DIVERTER CC/IPS
2581 POSI-TEMP W/STOPS W/3F DIVERTER CC/IP
FINISHED
WALL LINE
Floor
4-5/16" Max
(109mm)
8"
(203mm)
6-1/8"
(156mm)
2-1/8"
(54mm)
1-3/8"
(34mm)
Plaster
Ground
3/16" "Typ"
(5mm)
2-1/4"
(57mm)
4-1/4"
(108mm)
4-1/4"
(108mm)
1-1/16"
(27mm)
Plaster
Ground
Plastic
Tub/Shower
Surround
Face of
Stud
2-1/4"
(57mm)
1-1/16"
(27mm)
6-1/8"
(156mm)
Wall thickness
greater than 1/4"
Wall thickness
less than 1/4"
4/19
Must use twin ell with models
2521 & 2571 when installed
with a diverter tub spout.
Models 2551 & 2581 cannot
be installed with a diverter
tub spout.
  • Page 1 1

Moen 2521 Specification

Category
Sanitary ware
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages