NordicTrack NTC59021 User manual

Brand: NordicTrack

Model: NTC59021

Category: Fitness, gymnastics & weight training

Type: User manual

SL 700

Model No. NTC59020

Serial No.

Sedal

Number

Decal

QUESTIONS?

As a manufacturer, we are com-

mired to providing complete

customer satisfaction, tf you

have questions, or if there are

missing parts, we will guarantee

satisfaction through direct assis-

tance from our factory.

TO AVOID DELAYS, PLEASE

CALL DIRECT TO OUR TOLL-

FREE CUSTOMER HOT LINE.

The trained technicians on our

customer hot line will provide

immediate assistance, free of

charge to you.

CUSTOMER HOT LINE:

1-888-825-2588

Mon.-Fd., 6 a.m.-6 p.m. MST

_CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

USER'S MANUAL

Patent Pending

Visit our website at

www.nordictrack.com

new products, prizes,

fitness tips, and much morel

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ............................................................. 2

BEFORE YOU BEGIN ................................................................... 3

ASSEMBLY ........................................................................... 4

HOW TO OPERATE THE EXERCISE CYCLE ................................................. 8

MAINTENANCE AND TROUBLESHOOTING ................................................. 20

EXERCISE GUIDELINES ................................................................ 21

PART LIST ........................................................................... 22

EXPLODED DRAWING ................................................................. 23

HOW TO ORDER REPLACEMENT PARTS ........................................... Back Cover

LIMITED WARRANTY ........................................................... Back Cover

NordicTrackis a registered trademark of ICON Health & Fitness, Inc.

IMPORTANT PRECAUTIONS

a=WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the exercise cycle.

Read all instructions in this manual before

using the exercise cycle. Use the exercise

cycle only as described.

It is the responsibility of the owner to

ensure that all users of the exercise cycle 8.

are adequately informed of all precautions.

Wear suitable clothing when using the

exercise cycle; do not wear loose clothing

that could become caught on the exercise

cycle. Always wear athletic shoes.

Always keep your back straight when using

the exercise cycle. Do not arch your back.

Use the exercise cycle indoors on a level

surface. Keep the exercise cycle away from

moisture and dust. Place a met under the

exercise cycle to protect the floor or carpet.

Inspect and properly tighten all parts rsgu-

ladyoReplace any worn parts immediately.

Keep children under the age of 12 and pets

away from the exercise cycle at all times.

The exercise cycle should not be used by

persons weighing more than 250 pounds.

9. If you feel pain or dizziness while exercis-

ing, stop immediately and cool down.

10.

The pulse sensor is not a medical device.

Various factors, including the user's move-

msnt, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

11. The exercise cycle is intended for in-home

use only. Do not use the exercise cycle in a

commercial, rental, or institutional setting.

'_A.kWARNING: _fore beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Congratulations for selectingthe new NordicTrack_

SL 700 exercise cycle. Cycling is one of the most

effective exercises for increasing cardiovascular fit-

ness, building endurance, and toning the entire body.

The NordicTrack_ SL 700 offers an impressive array

of features designed to let you enjoy this healthful

exercise in the comfort and privacy of your home.

For your benefit, read this manual carefully before

you use the exercise cycle, If you have questions

after readingthis manual, call our Customer Service

Department toll-free at 1-888-825-2588, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time

(excluding holidays). To help us assist you, mention

the product model number and serial number when

calling. The model number is NTC59020. The serial

number can be found on a decal attached to the exer-

cise cycle (see the front cover of this manual for the

location of the decal).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Fan

Pulse Sensor

Book_ck

Console

Handlebar

Seat

Upright

Se_ Knob

FRONT

Seat Post Knob

Wheel

Pedal Strap

REAR

Pedal

*No water bottle

is included

Leveling Foot

RIGHT SIDE

ASSEMBLY

Assembly requires two persons, Place all partsofthe exercisecyclein a cleared area and remove the packing

matedals. Do not dispose ofthe packingmaterials untilassembly iscompleted.

Assembly requires the included tools and your own adjustable wrench _:_.

Use the drawings below to identifythe small parts used in assembly. The number in parenthesis below each

drawing refers to the key numberof the part, from the PART LIST on page 14. The second numberrefers tothe

quantity needed for assembly.Note: Some small parts may have been pre-attached for shipping. If a part is

not in the parts bag, check to see if it has been pre-assembled.

M8 x 40mm ButtonScrew

(54)-12

M8 x 25mm Patch Screw

(59)-4

M4 x 16mm Screw

(57)-4

M8 SplitWasher

(55)-18

M8 Nylon

Locknut(63)--4

1. Identifythe Front Stabilizer (15). While another person

liftsthe front of the Frame (1), attachthe Front

Stabilizer to the Frame with four M8 x 40mm Button

Screws (54) and four M8 SplitWashers (55).

2. While another person lifts the rear of the Frame (1),

attach the Rear Stabilizer (16) to the Frame with four

M8 x 40mm Button Screws (54) and four M8 Split

Washers (55).

3. While another person holds the Upright (2) in the posi-

tion shown, connect the Upper Wire Harness (42) to

the Lower Wire Harness (43). Carefully pull the

upper end of the Upper Wire Harness to remove

the slack from the Wire Harnesses.

Make sure that the Upright (2) is turned so the top

slopes down in the direction shown. Slide the

Uprightontothe Frame (1). Be careful to avoid pinch-

ing the Wire Harnesses (42, 43). Attachthe Uprightto

the Frame with fourM8 x 40ram ButtonScrews (54)

and four M8 Split Washers (55).

4. Hold the Handlebar (3) near the Upright (2). Feed the

Upper Wire Harness (42) up through the indicated hole

in the Handlebar. Attach the Handlebar to the Upright

with two M8 x 25ram Patch Screws (59) and two M8

Split Washers (55). Be careful to avoid pinching the

Upper Wire Harness.

Top must

slopedown in

this direction,

54,

Do not pinch the

Wire Harnesses

(42,43) during

55 this step.

Do not pinch

the Upper

Wire Harness

(42) during

this step.

, _ 42

5. Have another person hold the Console (4) near the

Handlebar (3).

Connect the Upper Wire Harness (42) to the wire har-

ness on the Console (4). Locate the two ground wires

that are connected with a screw to the Handlebar (3).

Connect the two ground wires to the two smallest wires

on the Console. Next, locate the two pulse wires

extendingfrom the Handlebar. Connect each pulse

wire to the wire of the same color on the Console.

Snap the Handlebar Cover (5) onto the Handlebar (3).

Carefully insertall excess wires into the Console (4).

Attach the Console to the metal plate on the Handlebar

(3) with four M4 x 16ram Screws (57). Be careful to

avoid pinching the wires.

6. Tum the Seat Post Knob (20) counterclockwisetwoor

three turns to loosen it. Next, pull the Knob, raise the

Seat Post (8) a few inches,and then release the Knob.

Move the Seat Post up and down slightly until the

pin on the Knob snaps into one of the holes in the

Seat Post. Then, turnthe Knobclockwiseuntilit is

tight.

Attach the Seat Bracket (7) tothe Seat Post (8) with

two M8 x 25mm Patch Screws (59). Make sure that

the Seat Bracket is oriented so the slot is on the

indicated side.

7. Attach the Seat (9) tothe Seat Carriage (11) with four

M8 Nylon Locknuts (63) and four M8 Split Washers

(55). Note: The Nylon Locknuts and Split Washers

may be pre-attached to the underside of the Seat.

Slide the Seat Carriage (11) into the Seat Bracket (7).

Move the Seat to the desired position. Insert the Seat

Knob (10) into the slot in the side of the Seat Bracket,

and tighten the Seat Knob into the Seat Carriage.

Do not pinch

the wires during

this step.

Ground 5

Wires \

Wires

Identify the Left Pedal (22), whichis marked with an

"L." Using an adjustable wrench, firmly tighten the

Left Pedal counterclockwise into the Left Crank Arm

(24). Tighten the Right Pedal (not shown) clockwise

intothe Right Crank Arm. Important: Tighten both

Pedals as finmly as possible. After using the

exercise cycle for one week, retighten the

Pedals. For best performance, the Pedals must

be kept tightened.

Identify the Left Pedal Strap (25), whichis marked

with an "L."Attach the Left Pedal Strap to the Left

Pedal (22), and adjustitto the desired position.

Adjust the Right Pedal Strap (not shown)in the

same way.

9. Make sure that all parts are properly tightened before you use the exercise cycle. Note:Afterassemblyis

completed,some extraparts may be leftover. Place a mat beneaththe exercisecycleto protectthe floor.

INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR

If you purchase the optionalchest pulse sensor (see page 19), follow the steps below to installthe receiver

includedwith the chest pulsesensor.

1. Remove the fourrecessed screws (not shown)from the

undersideof the Console (4). Do not remove the

screws attaching the Console to the metal plate on

the Handlebar (3).

Push the two water bottle holders up out of the

Console (4).

Carefully lift the fan and the top of the Console (4) in

the locations shown at the right; do not let the fan

slide out of the top of the Console. Note: It will be

necessary to turn the top of the Console slightly to

lift it past the Handlebar (3).

Water _ Lift Here

Bottle /27

_x_ 4 Holder

2. While another person holds the top ofthe Console (4)

and the fan in a vertical position, slide the receiver onto

the indicated plastic pin on the Console; make sure

that the receiver is oriented exactly as shown.

Locatethe two small screwsincludedwith the chest

pulse sensor. Attach the receiverto the Consolewith

the two screws as shown.

Connect the wire on the receiver to the indicated wire

on the Console (4).

Refer to step 1 above. Lowerthe top of the Console (4)

and the fan. Make sure that no wires are pinched.

Reattach the top of the Console with the four screws

removed in step 1. Discard any extra wires included

with the chest pulse sensor.

,_" '_ _J'_ L_'_Receiver

' Pin

HOW TO OPERATE THE EXERCISE CYCLE

HOW TO MOVE AND LEVEL THE EXERCISE

CYCLE

Stand infront of

the exercise cycle,

hold the handle- Wheel

bars firmly, and

placed your foot

against one of the

wheels. Tip the

exercise cycle until

it can be moved on

the wheels. Care-

fully move the exercise cycle to the desired location

and then lower it. Due to the weight of the exercise

cycle, use extreme caution while moving it.

If the exercise

cycle rocks slightly

during use, turn the

leveling feet under

the rear stabilizer

until the rocking

motion is eliminat-

ed.

Leveling

Foot

HOW TO ADJUST THE SEAT POST

For effectiveexer-

cise,the seat

shouldbe at the

properheight.As

you pedal,there

shouldbe a slight

bendin yourknees

when the pedals Seat

are in the lowest Post

position.To adjust

the heightofthe

seat, firstturnthe

seat post knob

counterclockwise

two or three turns

Seat

Post

Knob

to loosen it (if the knob is not loosened enough, it may

scratch the seat post). Next, pull the knob, slide the

seat post to the desired height, and then release the

knob. Move the seat post up and down slightly until

the pin on the knob snaps into one of the holes in

the seat post. Then, turnthe knobclockwiseuntilitis

tight.

HOW TO ADJUST THE SEAT

The seat can be

adjusted to the posi-

tion that is the most

comfortable for you.

Before adjusting

the seat, dismount

the exercise cycle;

do not adjust the

seat while you are Knob

sitting on it. To

adjustthe seat, first

turnthe seat knob

counterclockwise

two or three turnsto

loosenit. Slidethe seat forwardor backward to the

desiredposition,and then firmlytightentheseat knob.

HOW TO ADJUST THE PEDAL STRAPS

The pedal straps

can be adjusted to

the position that is

the most comfort-

able for you. Press

the tabs on the ped-

als, adjust the

straps to the

desired position,

and then release

the tabs.

CONSOLE DIAGRAM

f i_eslstanc e & P_e Programs

Weight L O_ -- TIr_IL BLAZER 1

BIKERS CH O_CE 2

Ae_,_c -- _GTORY HILL 3

COM_3T_C=_'S CHALLENGE 4

potforrnar_e -- _INNER S pAC E 5

pOWER DRIVE 6

Left Display Matrix TrainingZone Bar

mTIME {=:38143MENTTIME I_SF_EED _HEAqTP, ATE

#L-'I.Fr_l L-'lI I] /

'='--'t----'i --'L-ij ..........

_OE =;_J _STANCE =FAT _C&LS = RESIST/ 4CE AWAaNING:_or_o_ce_of

seriou_ it_u_-/. remdand undem_,_ the

, .......... _ms manual, 8__ucbens_ _d the

WARM-UP / COOL.OOY_N FAT BURN EN_JP, ANCE PERFC_MANCE w_ings b_O_e us_ _ childran ,_wmy

TRAININO ZONES

Note: If there is a sheet of clear plastic on the face

of the console, remove it before using the console.

FEATURES OF THE CONSOLE

The advanced console offers a selection of features

designed to make your workouts more enjoyable and

effective. When the manual mode of the console is

selected, the resistance of the exercise cycle can be

changed with a touch of a button. As you exercise, the

console will provide continuous exercise feedback.

You can even measure your heart rate using the hand-

grip pulse sensor. Note: For information about an

optional chest pulse sensor, see page 19.

The consolealso offers six resistance and pace pro-

grams. Each program automatically changes the resis-

tance of the exercise cycle and prompts you to

increase or decrease your pace as it guides you

through an effective workout.

In addition, the console features two heart rate pro-

grams that automatically change the resistance of the

exercise cycle and prompt you to vary your pace to

keep your heart rate near a target heart rate as you

exercise.

The console also features new iFIT.com interactive

technology. Having iFIT.com technology is like having a

personal trainer in your home. Using the included audio

cable, you can connect the exercise cycle to your

home stereo, portable stereo, or computer and play

special iFIT.com CD programs (CD's are available sep-

arately). IFIT.com CD programs automatically control

the resistance of the exercise cycle and prompt you to

vary your pace as a personal trainer coaches you

through every step of your workout. High-energy music

provides added motivation. Each CD features two pro-

grams designed by certified personal trainers.

In addition, you can connect the exercise cycle to your

VCR and TV and play iFIT.com video programs (video-

cassettes are available separately). Video programs

offer the same benefits as iFIT.com CD programs, and

add the excitement of working out with a class and an

instructor.

With the exercise cycle connectedto your computer,

you can also go to our Web siteat www.iFIT.com and

access programs directly from the internet. Explore

www.iFIT.com for details.

To purchase iFIT.com CD's and videocassettes,

call toll-free 1-800-735-0768.

HOW TO USE THE MANUAL MODE

B Begin pedaling to activate the console.

The exercise cycle requires no batteries or

external power source. Power is supplied by

a generator as you pedal. To activatethe con-

sole, begin pedaling at a speed of about 3 miles

per hour or faster. After a few seconds, the con-

sole displays will light. A tone will then sound

and the console will be ready for use.

B Select the manual mode.

When the power is /

turned on, the

manual mode will

be selected. If you

have selected a

programor the

iFIT.com mode,

selectthe manual mode by pressingthe Program

Select buttonrepeatedlyuntila trackappears in

the matrix.

B Begin pedaling and change the resistance of

the exercise cycle as desired.

As you pedal,

change the resis-

tance of the exer-

cise cycleby

pressing the

Resistance but-

tons. There are

SPEED =;= HEART RATE

0-"E' TooE/I

ten resistancelevels. Note:After the Resistance

buttonsare pressed, it willtake a momentfor the

exercise cycleto reach the selected resistance

_evel.

B Monitor your progress with the matrix, the

Training Zone bar, and the two displays.

The matrix--

When the manual

mode or the

iFIT.com mode is

selected,the

matrixwillshow a

track representing

1/4 mile.As you exercise, the indicators around

the trackwill flash to indicateyour position on the

track. When you have completed a lap, a new

lap will begin.

The Training Zone

bar--The Training

Zone bar willshow

yourpace and the

approximateinten-

sitylevelof your

exercise.Forexam-

ple, ifthree orfour indicatorsinthe bar are lit,the

bar showsthat yourpace is idealfor fat burning.

Duringprograms,the TrainingZone bar willalso

promptyou to increase or decrease yourpace.

'ObDOWN FATBURN ENDURANCEPERFORM/

TRAINING ZONES

The left display--

The left display will

show the elapsed

time, your pedaling

pace (measuredin

minutesper mile),

and the distance

you have pedaled.The displaywillchangefrom

one numbertothe next everyfew seconds,as

shownbythe indicatorsaroundthe display.Note:

When a programisselected, thedisplaywillshow

the time remainingin the programand the time

remainingin the currentsegment ofthe program

insteadof the elapsedtime.

lIB TIME _ SEGMENT TIME

[ 8]

I J" _1

PACE _ DISTANCE

If you stop pedaling for several seconds, a tone

will sound, the console will pause, and the left dis-

play will begin to flash.

The right

display--The right

display willshow

yourpedaling

speed, the approxi-

mate numbersof

fat ca/oriesand

calories you have burned (see FAT BURNING on

page 21), and the resistance level of the exercise

cycle. The displaywill change from one number to

the next every few seconds, as shown by the indi-

cators. The display will also show your heart rate

when you use the handgrip pulse sensor or the

optional chest pulse sensor. Note: Each time the

resistance of the exercise cyclechanges, the dis-

play will show the resistance level.

Note: The console

can display speed

and distance in

either miles or kilo-

meters. Tofind

which unit of mea-

surement is select-

c=l TIM E _:_ SEGMENT TIME

L----

_PACE _= DISTANCE

ed, you must selectthe console'suser mode. Hold

downthe Program Select button for aboutthree

seconds.The letter=E"for Englishmiles or the let-

ter "M"for metrickilometerswillappear in the left

display.To change the unitof measurement, press

the + button.

While the user

mode isselected,

press the Program

Start button. The

left display will

then show the total

number of hours

I ii-

pACE

that the exemisecycle has been used. Press the

Program Start button again. The left display will

then show the total number of miles pedaled. To

exit the user mode, press the Program Select but-

ton again.

O Measure your heart rate if desired,

Note: If you hold the handgrip pulse sensor

and wear the optional chest pulse sensor at

the same time, the console may not display

your heart rate accurately,

If there are

thin sheets of

plastic on the

metal con-

tacts on the

handgrip

pulse sensor,

peel off the

plastic. To

measure your

heart rate,

Contacts

place yourhands on the contacts;your palms

must be resting on the contactsclosest to you,

and your fingers must be touching the other con-

tacts. Avoid moving your hands.

When your pulse is

detected, the Heart

Rate indicator

above the right dis-

play will begin to

flash, one or two

dashes (- -) will

appear in the right display, and then your heart

rate will be shown. For the most accurate heart

rate reading, continue to hold the contacts for

about 15 seconds. Note: Ifyour heart rate is not

shown, make sure that your hands are positioned

as described. Be careful not to move your hands

excessively or to squeeze the metal contacts too

tightly.

When you hold the pulse sensor, the dght display

will show your heart rate for about 30 seconds. If

you continue to hold the pulse sensor, the display

will show your heart rate along with the other

modes.

r_Tum on the fan if desired.

Toturn on the fan at low speed, press the Fan

button.Pivotthe fan to the desired angle. To turn

on the fan at highspeed, press the Fan buttona

secondtime. To turnoffthe fan, press the Fan

buttona thirdtime.

B When you are finished exercising, the console

will automatically turn off.

If the pedals are not moved for about one minute,

the console displays willdarken. If the pedals are

not moved for aboutfive minutes,the consolewill

turn offand the displayswill be reset.

HOW TO USE RESISTANCE AND PACE

PROG_MS

B Begin pedaling to activate the console.

See step 1 on page 10.

B Select one of the six resistance and pace

programs.

When the power is

turned on, the

manual mode will

be selected. To

select a resistance

and pace program,

press the Program

Select button repeatedly until a "P 1," "P 2,""P 3,"

"P 4," "P 5," or "P 6" appears in the right display.

When a resistance and pace program is selected,

the matrix willshow the firstseven pace settings

for the program. The left display will show how

long the program will last.

B Press the Program Start button or begin

pedaling to start the program.

Each program is divided intoseveral time seg-

ments of different lengths. One pace setting and

one resistance setting are programmed for each

segment. (The same pace setting and/or resis-

tance setting may be programmed for two or more

consecutive segments.)

The pace setting

for the firstseg-

ment will be

shown in the flash-

ing Current

Segment column

of the matrix. (The

resistance settings

Current Segment

[]_ [][]mRJm =

_ [][]JRIR _

are not shown in the matrix.) The pace settings

for the next several segments will be shown in the

columns to the right.

As you exercise, the Training Zone bar will help

you to keep your pedaling pace near the pace

setting for the current segment. The lit indicators

in the bar will show your actual pace. If an indica-

tor to the right of

the lit indicators is

flashing (see draw-

ing a), increase COOL-OOWNFATBURN

your pace. If an TRAININGZONES

indicatorto the left

ofany litindicator

is flashing(see

drawingb),

decrease your

pace. When no ENDURANCEPI

TRAINING ZONES

indicator is flash-

ing, yourpace

matchesthe pace settingfor the currentsegment.

Important: The pace settings are intended

only to provide motivation. Your actual pace

may be slower than the current pace setting.

Make sure to exercise at a pace that is com-

fortable for you.

When onlythree secondsremain in thefirst seg-

ment of the program, both the Current Segment

columnand the columnto the rightwillflash, a

sedes oftones willsound, and all pace settings

will move one column tothe left. The pace setting

for the second segmentwill then be shownin the

flashingCurrentSegment columnand the resis-

tance oftheexercise cyclewillautomatically

changeto theresistancesettingfor thesecond

segment.

Note: If all of the indicatorsin the Current Segment

column are lit after the pace settings have moved

to the left, the pace settingswill move downward

so that only the highest indicators appear in the

matrix.

The programwillcontinueuntilthe pace setting

for the last segment is shownin the Current

Segment column ofthe matrix and no time

remainsin the program.

Note: Duringthe program, you can override the

resistancesettingfor the current segment, if

desired,with the Resistance buttons.However,

when the next segment begins,the resistance

may automaticallychange to the resistanceset-

tingfor the nextsegment. Ifyou stoppedalingfor

several seconds,a tone willsound and the pro-

gram willpause.To restartthe program,simply

resume pedaling.

B Monitor your progress with the two displays.

See step4 on page 10.

O Measure your heart rate if desired.

See step 5 on page 11.

r_Turn on the fan if desired.

See step 6 on page 11.

B When the program is finished, the console

will automatically turn off.

See step 7 on page 11.

HOW TO USE HEART RATE PROGRAMS

Each heart rate pmgrarn helps you to keep your heart

rate near a certainpercentage of yourmaximum heart

rate dudngyourworkout.(Yourmaximumheart rate is

estimated bysubtractingyourage from 220. For

example, ifyou are 30 years old, yourmaximum heart

rate is 190.) Heart rate program 1 isdesignedto keep

yourheart rate between 50% and 80% of yourmaxi-

mum heart rate while you exercise; heart rate pro-

gram 2 isdesignedto keep yourheart rate between

50% and 85% of yourmaximum heart rate.

Followthe steps below to use a heart rate program.

B Begin pedaling to activate the console.

See step 1 on page 10.

B Select one of the heart rate programs.

When the power is

turned on,the man-

ual mode will be

selected. To select

a heart rate pro-

gram, press the

Program Select

button repeatedly until an "H 1" or "H 2" appears

in the right display.

1_1 Enter your age.

When a heart rate

program is select-

ed, the word "AGE"

and the current

age setting will

flash in the left dis-

play. You must

enter your age to use a heart rate program. If

you have already entered your age, press the

Age Set Enter button and go to step 4. If you

have not entered your age, press the + or - but-

ton repeatedly to enter your age, and then press

the Age Set Enter button.

c=] TIME =:=_ SEGMENT TIME

I-i l_-112

_ PACE _:1 C4ST,_ICE

Once you have entered your age, it will be saved

in memory.

L_Hold the handgrip pulse sensor.

To use a heart rate program, you mustuse the

handgrippulsesensor (see step 5 on page 11) or

the optional chestpulse sensor.If you use the

handgrippulsesensor, itis not necessary to hold

the handgripscontinuouslyduringthe program.

However, you shouldhold the handgripsfre-

quentlyfor the programtooperate properly.Each

time you hold the handgrips, keep your hands

on the metal contacts for st least 30 seconds.

Note: When you are notholdingthe handgrips,

the letters "PLS"willappear in the rightdisplay

instead ofyour heart rate.

[]Press the Program Start button or begin

pedaling to start the program.

Each heart rate program consistsof 20 one-

minute segments. One resistancesettingand

one heart rate settingare programmedfor each

segment. (The same resistancesettingand/or

heart rate settingmay be programmedfor two or

more consecutive segments.)

The resistance

settingfor the first

segment will be

shown in the flash-

ing Current

Segment column

of the matrix.The

resistancesettings

Current Segment t

for the nextseveral segmentswill be shownin the

columnsto the right.

When only three seconds remain in the first seg-

ment, both the Current Segment column and the

column to the right will flash, a series of tones will

sound, and aft resistance settingswill move one

column to the left. The resistance setting for the

second segment will then be shown in the flash-

ing Current Segment column and the resistance

of the exercise cycle will automatically adjustto

the resistance setting for the second segment.

As you exercise, the Training Zone bar will help

you to keep your heart rate near the heart rate

setting for the current segment. The lit indicators

in the bar will show your actual pace. When you

hold the handgrip pulse sensor (or wear the

optional chest pulse sensor), the console will

periodically compare your heart rate to the heart

rate setting for the

currentsegment; if

necessary,an indi-

cator in the bar will

then flash to

promptyou to

increaseor

decrease your

pace to bringyour

heart rate closerto

the current heart TRAININGZONES

rate setting.If an

indicatorto the

right ofthe lit indicatorsisflashing(see drawing

a), increaseyour pace. If an indicatorto the/eft

of any lit indicatorisflashing(see drawingb),

decrease your pace. When no indicatorisflash-

ing,your heart rate is near the current heart rate

setting. Important: The heart rate settings are

intended only to provide motivation. Your

actual heart rate may be slower than the cur-

rent heart rate setting. Make sure to exercise

at a pace that is comfortable for you.

The program will continueuntilthe resistance set-

tingfor the lastsegment is shownin the Current

Segment columnof the matrix and notime

remainsin the program.

Note: During the program, youcan manually over-

ride the resistancesettingfor the current seg-

ment, if desired, with the Resistance buttons.

However, when the next segment begins, the

exercise cycle will automatically adjust to the

resistance setting for the next segment. If you

stop pedaling for several seconds, a tone will

sound and the program will pause. To restart the

program, simply resume pedaling.

r_ Monitor your progress with the two displays.

See step 4 on page 10.

B Turn on the fan if desired.

See step 6 on page 11.

[]When the program is finished, the console

will automatically turn off.

See step 7 on page 11.

HOW TO CONNECT YOUR CD PLAYER, VCR,

OR COMPEER

To use iFIT.com CD's, the exercise cycle must be

connected to your portableCD player, portable stereo,

home stereo, or computerwith CD player, See pages

15 and 16 for connectinginstructions. To use iFIT.com

videocassettes, the exercise cyclemustbe connected

to yourVCR. See page 17 for connectinginstructions.

To use iFIT.com programs directly from our Web

site, the exercise cycle must be connectedto your

home computer.See page 16 for connecting instruc-

tions.

HOW TO CONNECT YOUR PORTABLE CD PLAYER

Note: If your CD player has separate LINE OUT and

PHONES jacks, see instruction A below• If your CD

player has only one jack, see instruction B.

A. Plug one end of the audio cable intothe jack

beneath the console. Plug the other end of the

cable into the LINE OUT jack on your CD player.

Plug your headphones into the PHONES jack.

Audio "I Is

' -,_2 Cable f P

B. Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the

cable into a 1/8" Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your CD player. Plug your headphones into the

other side of the Y-adapter.

i PHONES(_::

,. ........... r.

1/8"

Audio Y-adapter

Cable

Headphones

HOW TO CONNECT YOUR PORTABLE STEREO

Note: If your stereo has an RCA-type AUDIO OUT

jack, see instruction A below. If your stereo has a

118"LINE OUT jack, see instruction B, If your

stereo has only a PHONES jack, see instruction C.

A. Plug one end of the audio cable into the jack

beneath the console. Plugthe other end of the cable

into the adapter. Plug the adapter into an AUDIO

OUT jack on your stereo.

A,B Jl_,_.

r--_

F-[

t i

Adapter --_

AudioCable

B. Plugone end of the audio cable intothe jack

beneath the console. Plug the other end of the

cable into the LINE OUT jack on your stereo. Do

not use the adapter.

C. Plug one end of the audio cable intothe jack

beneath the console.Plug the other end of the

cable into a 1/8" Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your stereo. Plug your headphones into the

other side of the Y-adapter.

c I-[: :J

, (_)_,

1/8"

Audio Y-adapte_

Cable

Headphones----->._c_

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack,

see instruction A below. If the LINE OUT jack is

being used, see instruction B.

A. Plug one end of the audio cable into the jack

beneath the console, Plug the other end of the

cable into the adapter. Plug the adapter into the

LINE OUT jack on your stereo.

•........... _..,

Adapter_

B. Plugone end ofthe audio cable intothe jack

beneath the console. Plug the other end of the

cable into the adapter. Plug the adapter into an

RCA Y-adapter (available at electronics stores),

Next, remove the wire that is currently plugged into

the LINE OUT jack on your stereo and plug the

wire into the unused side of the Y-adapter, Plug the

Y-adapter into the LINE OUT jack on your stereo,

Audio

Cable

Y_..........i

RCA

Y-adapte_--

Adapter

.......

Wire removed from

LINE OUT jack

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 118"LINE OUT jack,

see instruction A. If your computer has only a

PHONES jack, see instruction B.

A. Plugone end of the audio cable into the jack

beneath the console. Plug the other end of the

cable into the LINE OUT jack on your computer,

B. Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the

cable into a 1/8" Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your computer. Plug your headphones or speak-

ers into the other side of the Y-adapter.

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,

see instruction A below. If the AUDIO OUT jack is

being used, see instruction B. If you have a TV

with a built-in VCR, see instruction B. If your VCR

is connected to your home stereo, see HOW TO

CONNECT YOUR HOME STEREO on page 16.

A. Plug one end of the audio cable intothejack

beneath the console, Plug the other end of the

cable ink the adapter. Plug the adapter intothe

AUDIO OUT jack on your VCR.

B. Plug one end of the audio cable intothejack

beneath the console. Plug the otherend of the

cable into the adapter. Plug the adapter into an

RCA Y-adapter (available at electronics stores),

Next, remove the wire that is currently plugged into

the AUDIO OUT jack on your VCR and plug the

wire into the unused side of the Y-adapter, Plug the

Y-adapter into the AUDIO OUT jack on your VCR.

ii i] ROAYadapter i :: -

Audio Cable AdaPter

Wire removedfrom-_>-[:_='-'

AUDIO OUT jack

HOW TO USE IFIT.COM CD AND VIDEO

PROG_S

To use iFIT.comCD's or videocassettes, the exercise

cycle must be connected to your portable CD player,

portable stereo, home stereo, computer with CD play-

er, or VCR. See HOW TO CONNECT YOUR CD

PLAYER, VCR, OR COMPUTER on page 15. To pur-

chase iFIT.com CD's and videocaseettes, call toll-

free 1-800-735-0768.

Follow the steps below to use an iFIT.com CD or

video program.

B Begin pedaling to activate the console,

See step 1 on page 10.

Select the iFIT.com mode.

When the console

is turned on, the

manual mode will

be selected. To

select the iFIT.com

mode, press the

iFIT.com button.

The indicator above the button will light.

Insert the iFIT.com CD or videocassette.

If you are using an iFIT.com CD, insertthe CD

into your CD player. If you are using an iFIT.com

videocassette, insert the videocassette into your

VCR.

L_ Press the play button on your CD player or

VCR.

A moment after the play button is pressed, your

personal trainer will begin guiding you through

your workout.Simply follow your personal trainer's

instructions.

The program will functionin almost the same way

as a resistance and pace program (see step 3 on

page 12). However, an electronic "chirping" sound

will alert you when the resistance setting and/or

the pace setting is about to change.

Note: If the resistance of the exercise cycle

andlor the pace setting does not change when

a "chirp" is heard:

• Make sure that the indicator above the

iFIT.com button is lit.

• Adjust the volume of your CD player or VCR.

If the volume is too high or too low, the con-

sole may not detect the program signals.

• Make sure that the audio cable is properly

connected and that it is fully plugged in.

Monitor your progress with the two displays.

See step4 on page 10.

r,_ Measure your heart rate if desired.

See step 5 on page 11.

B Turn on the fan if desired.

See step 6 on page 11.

[]When the program is finished, the console will

automatically turn off.

See step 7 on page 11.

OUR_B SITE

Our Web site at www.iFIT.com allows you to play

JFIT.comaudio and video programs directly from the

internet. To use programs from our Web site, the exer-

cise cycle must be connected to your home computer.

See HOW TO CONNECT YOUR COMPUTER on

page 16. In addition, you must have an internet con-

nection and an internet service provider. A list of spe-

cific system requirements will be found on our Web

site.

Follow the steps below to use a program from our

Web site.

g Begin pedaling to activate the console.

See step 1 on page 10.

F_ Select the iFIT.com mode.

is turned on, the

manual mode will

be selected. To

select the iFIT.com

mode, press the

iFIT.com button.

The indicator above the button will light.

your computer and start an internet

_1 G:t°ection"

D Start your Web browser, if necessary, and go

to our Web site at www.iFIT.com.

1_'_ Follow the desired links on our Web site to

select a program.

Read and follow the on-lineinstructionsfor using

a program.

r_ Follow the on-line instructions to start the

program.

When you start the program, an on-screen count-

down will begin.

B Return to the exercise cycle and begin

pedaling.

When the on-screen countdown ends, the pro-

gram will begin. The program will function in

almost the same way as a resistance and pace

program (see step 3 on page 12). However, an

electronic "chirping" sound will alert you when the

resistance setting and/or the pace setting is about

to change.

[]Monitor your progress with the two displays.

See step 4 on page 10.

I_'1 Measure your heart rate if desired.

See step 5 on page 11.

BTurn on the fan if desired.

See step 6 on page 11.

BWhen you are finished exercising, the console

will automatically turn off.

See step 7 on page 11.

THE OPTIONAL CHEST PULSE SENSOR

The optional chest pulse sensor provides hands-free

operation and continuously monitors your heart rate

during your workouts. To purchase the optional

chest pulse sensor, call toll-free 1-800-734-2377.

MAINTENANCE AND TROUBLESHOOTING

Inspectand properly tighten all parts of the exercise

cycle regularly. To clean the exercise cycle, use a

soft, damp cloth. To prevent damage to the console,

keep liquids away from the consoleand keep the con-

sole out of direct sunlight.

HOW TO ADJUST THE REED SWITCH

If the console does notdisplay correct feedback, the

reed switch should be adjusted. Toadjust the reed

switch, the RightSide Shield (27) must be removed.

Using an adjustable wrench, tum the Right Pedal (21)

counterclockwise and remove it. Next, remove the M4

x 25mm Screws (65). Turn the Right Crank Arm (24)

so that it is pointingtoward the front of the exercise

cycle and then slide off the Right Side Shield.

Turn the right crank arm for a moment. Repeat until

the console displays correctfeedback. When the reed

switch is correctly adjusted, reattach the right side

shield and the right pedal.

HOW TO ADJUST THE DRIVE BELT

If you can feel the pedals slip while you are pedaling,

even when the resistance is adjusted to the highest

level, the Drive Belt (47) may need to be adjusted. To

adjust the Drive Belt, you must first remove both side

shields. Refer to HOW TO ADJUST THE REED

SWITCH at the left and remove the side shields.

Next, locate the Reed Switch (46). Turn the Right

Crank Arm (24) until the Magnet (30) is aligned with

the Reed Switch. Loosen, but do not remove, the indi-

cated Screw (57). Slide the Reed Switch slightly clos-

er to or away from the Magnet. Then, retighten the

Screw.

Next, turn the indicated M8 Nylon Locknut (63) until

the Drive Belt (47) is properly tightened. Then, reat-

tach the side shields.

PULSE SENSOR TROUBLESHOOTING

• Avoid moving your hands while using the pulse sen-

sor. Excessive movement may interfere with heart

rate readings. Do not hold the metal contacts too

tightly; doing so may interfere with heart rate read-

ings.

• Forthe most accurate heart rate reading, hold the

metal contacts for about 15 seconds.

• For optimal performance of the pulse sensor, keep

the metal contacts clean. The contacts can be

cleaned with a soft cloth--never use alcohol,

abrasives, or chemicals.

Page is loading ...

NordicTrack NTC59021 User manual

Brand: NordicTrack

Model: NTC59021

Category: Fitness, gymnastics & weight training

Type: User manual

Download PDF

report

NordicTrack NTC59021 User manual

NordicTrack NTC59021 User manual

Related papers

Other documents