Acura 2011 ZDX is an innovative and feature-rich vehicle that offers a wide range of advanced technology options to enhance your driving experience. With its sleek design and cutting-edge features, the Acura 2011 ZDX is the perfect choice for drivers who demand both style and substance.
Here are some of the key capabilities of your new Acura 2011 ZDX:
- Blind Spot Information System (BSI) uses radar sensors to detect vehicles in your blind spots and alerts you with a visual indicator in the side mirrors.
- Bluetooth® HandsFreeLink® allows you to make and receive calls, stream music, and control your smartphone using voice commands.
Acura 2011 ZDX is an innovative and feature-rich vehicle that offers a wide range of advanced technology options to enhance your driving experience. With its sleek design and cutting-edge features, the Acura 2011 ZDX is the perfect choice for drivers who demand both style and substance.
Here are some of the key capabilities of your new Acura 2011 ZDX:
- Blind Spot Information System (BSI) uses radar sensors to detect vehicles in your blind spots and alerts you with a visual indicator in the side mirrors.
- Bluetooth® HandsFreeLink® allows you to make and receive calls, stream music, and control your smartphone using voice commands.
2011
o w n e r s . a c u r a . c o m
27134
31SZNQ10 2011 Acura ZDX Advanced Technology Guide 1234.5678.91.0
00X31-SZN-Q100 ©2010 Honda Motor Co., Ltd. — All Rights Reserved Printed in U.S.A.
ADVANCED TECHNOLOGY GUIDE
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:55 PM Page 1
A D V A N C E D T E C H N O L O G Y G U I D E
The Advanced Technology Guide is designed to help you get
acquainted with your new Acura and provide basic instructions
on some of the technology items.
This guide is not intended as a substitute for the Owner’s
Manual. For complete information on vehicle controls and
operation, please refer to the respective sections in the
Owner’s Manual.
As with the Owner’s Manual, this guide covers all trim levels of
the Acura ZDX. Therefore, you may find descriptions of
equipment and features that are not on your particular vehicle.
Bluetooth
®
HandsFreeLink
®
................................................................27
iPod
®
or USB Flash Memory ...............................................................32
Note Function .....................................................................................32
Bluetooth
®
Audio ................................................................................33
Hard Disc Drive (HDD) Audio ............................................................34
Song By Voice
TM
(SBV)........................................................................35
Collision Mitigation Braking System
TM
(CMBS
TM
)...............................37
Adaptive Cruise Control (ACC)........................................................39
Blind Spot Information System (BSI) ..................................................40
My Acura.............................................................................................41
Safety Reminder .................................................................................42
Fuel Requirement ...............................................................................42
Advance Package shown
Instrument Panel Indicators.................................................................2
Keyless Access System .........................................................................4
Multi-Information Display (MID)...........................................................6
Keyless Memory Settings....................................................................11
Rearview Camera ..............................................................................13
Reverse Door Tilt Mirrors .....................................................................14
HomeLink
®
...........................................................................................15
Voice Recognition..............................................................................16
Navigation...........................................................................................22
AcuraLink Real-Time Traffic
TM
............................................................24
AcuraLink Real-Time Weather
TM
........................................................25
AcuraLink
®
Messages .........................................................................26
B L UE T OO T H
®
H A N D S F R E E L I N K ®
p.27
A D A P T I V E C R U I S E
C O N T R O L p. 39
A U D I O
p. 32
N A V I G A T I O N
p. 22
B L I N D S P O T I N F O R M A T I O N
S Y S T E M p. 40
M U L T I - I N F O R M A T I O N
D I S P L A Y p. 6
V O I C E
R E C O G N I T I O N
p. 16
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:55 PM Page 2
I N S T R U M E N T P A N E L I N D I C A T O R S
O n / O f f I n d i c a t o r s
M a l f u n c t i o n I n d i c a t o r s
If an indicator remains on, there may be a problem; see your dealer
Charging system
Low brake fluid, Brake system
Low oil pressure
SH-AWD
(Super Handling-All Wheel Drive)
VSA
(Vehicle Stability Assist)
Malfunction indicator lamp
(check engine light)
TPMS (blinks)
(Tire Pressure Monitoring System)
CMBS*
(Collision Mitigation Braking System)
SRS
(Supplemental Restraint System)
ABS (Anti-lock Brake System)
ACC*
(Adaptive Cruise Control)
ECPS*
(Electronically Controlled Power
Steering System)
Active Damper System*
Blind Spot Information System*
Keyless Access System*
PASSENGER
AIRBAG
OFF
PASSENGER AIRBAG OFF
(above audio panel)
SIDE AIRBAG OFF
VSA OFF
Fog lights on
Immobilizer (flashes): improperly
coded key; use correct key
Headlights on
Turn signals/hazards on
CRUISE CONTROL* on
Adaptive Cruise Control* on
CRUISE MAIN* on
High beams on
Briefly appear with each engine start. Red and amber indicators are most critical.
Blue and green indicators are used for general information.
*if equipped
32
C o n d i t i o n I n d i c a t o r s
Action is needed by driver
Parking brake on:
Release
Message indicator:
See MID
Door/tailgate open:
Close door or tailgate
Low tire pressure (stays on):
Add air
Seat belt reminder:
Fasten seat belt(s)
Low fuel:
Refill
Advance Package shown
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:55 PM Page 3
4
5
K E Y L E S S A C C E S S S Y S T E M ( T e c h / A d v a n c e P a c k a g e )
Operate certain functions of your vehicle by simply having the remote
within operating range.
Press the door lock button on
either front door handle.
Grab either one of the front door
handles.
O p e n i n g t h e T a i l g a t e
Press the tailgate release switch.
E n g i n e S t a r t / S t o p B u t t o n
Press and hold the brake pedal,
then press the ENGINE
START/STOP button.
S t a r t i n g t h e e n g i n e
Shift to Park, then press the
ENGINE START/STOP button.
T u r n i n g t h e e n g i n e o f f
Use audio, power sockets,
power windows, etc., without
turning the engine on.
A c c e s s o r y M o d e
L o c k i n g t h e D o o r s
U n l o c k i n g t h e D o o r s
Press the ENGINE START/STOP
button once (without pressing
the brake pedal).
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:55 PM Page 4
M U L T I - I N F O R M A T I O N D I S P L A Y ( M I D )
A c c e s s i n g t h e M I D M a i n D i s p l a y s
L o w e r D i s p l a y s
Consists of several displays that provide you with useful information.
Odometer,
trip meter
Odometer,
Outside temperature
Trip A,
Outside temperature
Oil life,
Outside temperature
Trip B,
Outside temperature
Trip computer SH-AWD torque
distribution monitor
Keyless Memory
Settings
TM
Bluetooth
®
HandsFreeLink
®
(shown on base model only)*
Tire pressure
monitor
* if phone is paired
When you start the engine, the MID
shows the last active display from
the previous drive cycle.
To toggle between the different
displays, press either Info button
(▲/▼) for the main displays and
press the SEL/RESET button for
the sub-displays.
SEL/RESET
button
INFO
button
76
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:56 PM Page 5
8
T r i p C o m p u t e r
While on the Trip Computer display,
press the SEL/RESET button to
access trip information. Press either
Info (▲/▼) button to toggle
through the various screens, or the
SEL/RESET button for sub-displays.
SEL/RESET
button
INFO
button
Trip computer Average fuel
economy A*
Average fuel
economy B*
Instant fuel economy
*sub-displays available
Range
T i r e P r e s s u r e M o n i t o r i n g S y s t e m
Alerts you when one or more of your tires has significantly low pressure. Toggle
to the tire pressure monitor display to view pressure readings on the MID.
H o w i t W o r k s
W h a t t o D o
1. Visually inspect the tires for
damage.
2. Use a tire air pressure gauge
(or check the MID) to check
which tire(s) have low pressure.
3. Inflate the tire(s), if necessary,
to the recommended pressures
listed on the label on the
driver’s doorjamb.
If the tire pressure drops significantly below recommended levels:
• The low tire pressure indicator comes on.
• A “CHECK TIRE PRESSURE” message appears on the MID, showing
which tire(s) have low pressure.
9
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:56 PM Page 6
K E Y L E S S M E M O R Y S E T T I N G S
1110
2. Check the MID:
• If you have the correct remote, the driver ID that first appears on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the vehicle off.
- Press the unlock button on your remote.
- Turn the vehicle on again and checkthe MID. The driver ID that
first appears on the MID should now match the number on the
back of your remote.
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
1. Select “CHG SETTING.”
3. Select “AUTO DOOR
UNLOCK.”
4. Select “SHIFT TO P.”
5. Select “ALL DOORS.”
6. Once the setting has been
saved, select “EXIT.”
Six groups of settings can be programmed using the MID*: Adaptive Cruise Control
(ACC) Setup (if equipped), Meter Setup, Position Setup, Keyless Access Setup (if
equipped), Lighting Setup, and Door/Window Setup.
SEL/RESET
button
Info
button
Press the Info button to toggle to
the “Keyless Memory Settings”
display, then press SEL/RESET to
activate the menu.
M o d i f y i n g t h e A u t o D o o r U n l o c k S e t t i n g
* See Customized Settings in your owner’s manual for other programmable settings.
Each remote (labeled 1 or 2 on the back) activates its own set of programmable
audio, climate, driving position memory, and customized settings (MID).
1. Verify that you are using the correct remote by turning the vehicle on.
C h e c k p o i n t
2. Select “DOOR/WINDOW
SETUP.”
3. Once you have the correct remote, you can begin to program your
Keyless Memory Settings.
Tech model shown
As the default setting, only the driver's door unlocks when you shift to Park.
Follow the steps below to set all doors to unlock when you shift to Park:
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 1:57 PM Page 7
C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
Some examples on how to program vehicle settings.
1. Turn the vehicle on.
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
3. Set your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the ignition switch to
ON (II). Shift into Park (P).
3. Press and hold the SET button
until you hear a beep, then
release.
2. Adjust your preferred seat,
steering wheel, and outside
mirror settings.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
* See Customized Settings in your owner’s manual for other programmable settings.
R E A R V I E W C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
When you shift into
Reverse, a real-time
image of the area behind
your vehicle, along with
helpful parking guide
lines, shows in the
monitor. It automatically
turns off when you shift
out of Reverse.
H o w I t W o r k s
Press and hold the power
button for about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( B a s e M o d e l )
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
Press and release the power
button.
T u r n i n g t h e R e a r v i e w
M o n i t o r O n o r O f f
Press and hold CANCEL for
about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( T e c h / A d v a n c e P a c k a g e )
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
S w i t c h i n g V i e w s
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle.
Base Model Tech/Advance
Base Model Tech/Advance
There are 3 rearview modes.
Press ENTER to toggle between
views. Turn the Interface Dial to
adjust the screen brightness.
Normal Top Down
Wide
Normal Top Down
Wide
1312
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 4:28 PM Page 8
1514
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R), you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’s
door mirror, move the
mirror selector switch
to the left (L) position.
• To tilt the passenger’s
side door mirror,
move the mirror
selector switch to the
right (R) position.
• To turn the feature
off, move the switch
to the middle
position.
H O M E L I N K ®
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YESNO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YESNO
YESNO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home, such as garage
doors, lighting, or home security systems.
If you have any problems programming HomeLink, see the owner's manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit www.homelink.com.
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 4:29 PM Page 9
V O I C E R E C O G N I T I O N
F u n c t i o n s b y V o i c e C o m m a n d
To keep your eyes on the road and hands on the wheel, use voice commands for
hands-free calling, navigation, audio, climate control, and AcuraLink functions. For a
full list of commands, say "Info" and "Voice Help."
Control five different systems with the steering wheel buttons and the
ceiling microphone.
10 11
A C U R A L I N K *
p. 26
B L U E T O O T H
®
H A N D S F R E E L I N K ®
p. 27
A U D I O *
p. 21
C L I M A T E *
p. 21
N A V I G A T I O N *
p. 22
* Voice commands for these systems are available on Tech/Advance Package only.
Advance Package shown
1716
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:24 PM Page 10
U s i n g t h e V o i c e C o m m a n d S y s t e m
V o i c e C o m m a n d T i p s
HFL Talk button: Give HFL
commands and answer
incoming calls.
HFL Back button: Cancel a
command and end or decline
a call.
B a s e M o d e l
Pick-Up button: Answer an
incoming call, or go directly to the
Cellular Phone screen.
Hang-Up button: End a call or
decline a call.
Talk button: Give HFL, navigation,
audio, climate control, or
AcuraLink commands.
Back button: Cancel a command
and return to the previous screen.
T e c h / A d v a n c e P a c k a g e
- To hear a list of available commands at any time, press and release the
Talk button, then say “Help.”
-
When using the Talk button, wait for a beep, then give a command.
- Speak in a clear, natural voice.
- Reduce all background noise.
- Adjust the dashboard and side vents away from the microphone in the
ceiling.
- Close the windows.
C o m m o n l y U s e d V o i c e C o m m a n d s
Press and release the Talk button before you give a command.
L o o k f o r R e s t a u r a n t s
N e a r Y o u r L o c a t i o n
Say a command like “Display
restaurant” to see restaurant icons
appear on the map.
A d j u s t V e h i c l e ’ s C l i m a t e
S e t t i n g
Say a command like “Air
conditioner on” and “Fan speed 4”
to achieve a comfortable climate
setting.
M a k e A u d i o S e l e c t i o n s
Say a command like “Radio 97.1
FM” or “CD play track 5” to select
that station or song.
G e t E s t i m a t e d D i s t a n c e
t o D e s t i n a t i o n
After a destination is entered, say
“How far to destination?” to hear
the remaining distance.
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
1918
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:01 PM Page 11
C o m m o n l y U s e d V o i c e C o m m a n d s ( c o n t i n u e d )
Press and release the Talk button before you give a command. Press and release the Talk button before you give a command.
G e n e r a l C o m m a n d s (Accepted on most screens to change displays)
• Display map
• Display menu
• Information
• Display audio
screen
• What time is it?
F i n d P l a c e C o m m a n d s (Accepted on Map screen)
• Find nearest:
- ATM
- gas station
- Mexican
restaurant
- post office
- bank
- Acura dealer
- airport
- hospital
D i s p l a y C o m m a n d s (Accepted on Map screen)
• Display (or hide):
- ATM
- gas station
- restaurant
- post office
• Display north up/
heading up
• Zoom in/out
• Go home
• Display current
location
N a v i g a t i o n C o m m a n d s (Accepted on Map screen after a destination is entered)
A u d i o C o m m a n d s (Accepted on most screens)
• Radio on
• Radio # FM/AM
• Radio preset
1/2/3/4/5/6
• XM channel #
• XM 1/2 preset
1/2/3/4/5/6
• CD play
• CD play track #
• CD skip
forward/back
• Auxiliary (AUX)
play
S e t u p C o m m a n d s (Accepted on Setup screen)
W e a t h e r C o m m a n d s * (Accepted on Map screen)
• Brightness
up/down
• Volume up/down/
min/max/off
• Interface dial
feedback on/off
• Guidance prompts
min/max/normal
• Display weather
• Display weather
icons
• Display weather
warning icons
H e l p C o m m a n d s (Accepted on most screens)
• Help (list of available commands for
current screen)
• Voice command help (from the INFO
screen - list of all available navigation,
audio, and climate control commands)
C l i m a t e C o n t r o l C o m m a n d s (Accepted on most screens)
T r a f f i c C o m m a n d s * (Accepted on Map screen)
• Display traffic
• Display traffic
speeds
• Display traffic icons
• Display traffic
incidents/list
*subscription required
• How long/far to the destination?
• Display destination
• Display entire route
• Air conditioner
on/off
• Rear defrost on/off
• Climate control
recirculate/fresh
air
• Fan speed
up/down
• Temperature #
degrees (# = 57–87)
• Temperature max
hot/cold
2120
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:01 PM Page 12
E n t e r i n g a D e s t i n a t i o n
N A V I G A T I O N ( T e c h / A d v a n c e P a c k a g e )
Real-time navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Press and release the Talk button before you give a command.
U s i n g V o i c e C o n t r o l
U s i n g t h e “ F i n d N e a r e s t ” C o m m a n d
Try these simple steps to find a nearby point of interest, such as a gas station,
movie theater, restaurant, etc.
Press and release the Talk button before you give a command.
1. Say “Find nearest ATM.”
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to
destination.
3. Say the number next to the
destination you want.
4. The system calculates the
route and displays the
“Calculate route to” screen.
Say “OK” to set the route.
* You can also use the Interface Dial to complete this procedure.
* You can also use the Interface Dial to complete this procedure.
Calculated Route
Distance to go
Direction of destination
Current vehicle
location
M a p S c r e e n
L e g e n d
1. Say “Display menu” and
“Address.”
2. Say “Street” followed by the
street name. Do not include
the direction (N, S, E, W) or
type (St., Ave., Blvd., etc.).
3. A list of street names appears.
Say the number next to the
street you want.
4. Say the entire street address
number. For example, “1-2-3-
4.”
5. If the street address is in
more than one city, a list of
city names appears. Say
the number next to the city
you want.
6. The system calculates the
route and displays the
“Calculate route to” screen.
Say “OK” to set the route.
2322
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:01 PM Page 13
16
Press and release the Talk button before you give a command. Press and release the Talk button before you give a command.
D i s p l a y i n g T r a f f i c I n f o r m a t i o n
Say “Display traffic”** to view highway flow of data.
NOTE: Traffic flow and incident
icons can only be displayed on
map scales of 5 miles (8 km) or
less.
Heavy traffic
Moderate traffic
Free-flow traffic
* Subscription-based service through Sirius XM Radio
®
(free 90-day trial upon vehicle purchase)
** You can also display this information manually using the Interface Dial from the Map menu.
Traffic
Flow
data
Incident
icon
Incident
Incident Icons:
Congestion
Construction
Road
closed
Weather
A C U R A L I N K R E A L - T I M E W E A T H E R
T M
* ( i f e q u i p p e d )
D i s p l a y i n g W e a t h e r I c o n s
Say “Display weather”** to view weather icons for each city.
* Subscription-based service through Sirius XM Radio
®
(free 90-day trial upon vehicle purchase)
** You can also display this information manually using the Interface Dial from the Map menu.
Clear
Weather Icons:
Partly
Cloudy
Cloudy
Fog
Rain
Snow
Provides continuously updated weather conditions, warnings, and forecasts in
major metro areas.
1. Say “Display traffic incidents”
to view a list of incidents in
your area.
2. Say “On route” to view specific
incidents on your route.
3. Say the number of the
incident you wish to avoid,
and say “Avoid.”
4. The system notifies you that your
route has been changed.
T r a f f i c R e r o u t i n g
The system can automatically provide detours around traffic incidents (if
Traffic Rerouting is ON in Setup), or you can calculate a new route manually.
W e a t h e r F o r e c a s t
Say “Weather forecast” to view a
1-day or 3-day forecast of your
current position or city vicinity.
R a d a r M a p
Say “Radar map” to view color-
coded rain or snow systems.
W e a t h e r W a r n i n g L i s t
Say “Warning list sorted by distance”
to view a list of all U.S. weather
warnings by distance.
W e a t h e r W a r n i n g M a p
Say “Warning map” to view color-
coded severe weather systems.
D i s p l a y i n g W e a t h e r I n f o r m a t i o n
Say “Information,” then “Weather information” for the following options:
NOTE: Weather icons are
available on all map scales.
A C U R A L I N K R E A L - T I M E T R A F F I C
T M
* ( i f e q u i p p e d )
Provides continuously updated info, including traffic speed, incidents, and
construction in major metro areas.
2524
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:02 PM Page 14
S c h e d u l i n g a D e a l e r A p p o i n t m e n t
A C U R A L I N K ® M E S S A G E S ( T e c h / A d v a n c e P a c k a g e )
Acura periodically sends you messages on vehicle features, recall and safety
information, maintenance reminders, and diagnostic information.
1. When you receive a new
message, an envelope icon
appears on the map screen.
2. Say “Messages,” and a list of
messages appears.
1. Using the Interface Dial,
open a maintenance or
product update message.
3. The system searches for the next available
appointment at your dealer. Select
“Confirm Appointment” if you are satisfied
with the date.
2. Select “Schedule
Dealer Appt.”
4. Select “OK” to set the appointment.
3. Say the number of the
message you want to hear.
To use this feature, you must register at My Acura (www.myacura.com), and make
sure your compatible phone is paired and correctly set up (see page 29).
B L U E T O O T H
®
H A N D S F R E E L I N K ®
( B a s e M o d e l )
Place and receive phone calls through your vehicle's audio system. Visit
www.acura.com/handsfreelink to check if your phone is compatible.
P a i r i n g Y o u r P h o n e
V i e w i n g N e w M e s s a g e s
HFL Talk button: Give HFL
commands and answer incoming
calls.
HFL Back button: Cancel a
command and end or decline a
call.
2726
NOTE: If you are notsatisfied with the available
date,use the Calloption tocallyour dealer directly.
Press and release the HFL Talk button before you give a command.
1. Enable “Discovery” or
“Search” mode on your
compatible phone.
3. HFL gives you a four-digit
code (that also appears
on the MID) and begins to
search for your phone.
6. HFL asks you to name the
phone. For example, say
“Mary's phone.”
5. Enter the four-digit code
on your phone when
prompted.
2. Say “Phone setup,”
then say “Pair.”
4. Search for a HandsFreeLink
device from your phone,
and connect to HFL.
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:02 PM Page 15
M a k i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number.
2. Say “Call” or “Dial” to
begin the call.
3. The call is connected and
heard through the
speakers.
R e c e i v i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. A notification is heard, and
“INCOMING CALL” and the
phone number appear on
the MID.
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button
to decline or end the call.
B L U E T OOT H
®
HA ND SF RE EL IN K®
( Tech/Advance Package)
Allows you to place and receive phone calls through your vehicle’s navigation
and audio systems. Visit www.acura.com/handsfreelink to check if your phone is
compatible.
Press and release the Talk button before you give a command.
3. Say “Pair phone.”
2. Say “Setup Bluetooth
phone.”
4. HFL gives you a 4-digit pass-
key and begins to search
for your phone.
5. Put your phone in discovery
mode, and search for a
Bluetooth device.
6. When your phone prompts
you, input the 4-digit pass
key and connect to HFL.
* You can also use the Interface Dial to complete this procedure.
1. Press the Pick-Up button to
access the Cellular Phone
screen, and say “Phone setup.”
Pick-Up button: Answer an
incoming call, or go directly to the
Cellular Phone screen.
Hang-Up button: End a call or
decline a call.
Talk button: Give HFL commands.
Back button: Cancel a command
and return to the previous screen.
P a i r i n g Y o u r P h o n e
1234567890
1
IN USE
C
CALLING
INCOMING
CALL
1234567890
2928
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:03 PM Page 16
M a k i n g a C a l l
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Dial.”
3. Say the entire phone
number and “Dial” to
begin call.
4. The call is connected and
heard through the speakers.
R e c e i v i n g a C a l l
1. When you receive an incoming call, you hear a notification and see
one of the following pop-up messages.
3. Press the Hang-Up button
to end or decline the call.
2. Press the Pick-Up button to
accept the call.
Note: You can also use the Interface Dial to complete this procedure.
On the audio screen
On the navigation
map screen
On the Cellular
Phone screen
D i a l i n g a N u m b e r
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Phonebook.”
4. Say the number of the
entry you want to call.
Note: You can also use the Interface Dial to complete this procedure.
* Visit www.acura.com/handsfreelink to check if this feature is available on your phone.
U s i n g t h e I m p o r t e d P h o n e b o o k *
3130
3. HFL imports your cellular
phonebook if not already
imported.
Press and release the Talk button before you give a command.
Note: You can also use the Interface Dial to complete this procedure.
U s i n g S p e e d D i a l a n d V o i c e T a g s
Note: See your owner’s manual for instructions on storing speed
dial entries and accompanying voice tags.
3. The call is connected and
heard through the
speakers.
2a. Say “Call” and the number of
the entry. For example, “Call
one.” For the complete list of
speed dial entries, say “More
speed dial.”
2b. If a speed dial has a stored
voice tag, say “Call” and
the voice tag name. For
example, “Call Mary.”
1. Press the Pick-Up button to
access the Cellular Phone
screen.
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:03 PM Page 17
3. Push USB/AUX to begin playing.
4. Press the SKIP buttons to change
tracks.
2. Connect the USB connector to your
iPod dock connector or flash drive.
1. Open the center console, and
pull out the USB adapter cable.
1. To record a song sample, press
and hold XM for about 2 seconds.
2. To replay stored information, push
the selector knob down.
3. Turn the selector knob to select
“NOTE,” then press ENTER.
4. Turn the selector knob to select a
sound file, then press ENTER. The
selected recording plays.
B L U E T OOT H
®
AU DI O
Play audio files from your compatible phone through your vehicle’s audio system.
Visit www.acura.com/handsfreelink to check if this feature is available on your
phone.
i P o d ® o r U S B F l a s h M e m o r y
Play audio files from your compatible iPod or USB flash memory device through your
vehicle’s audio system.
C o n n e c t i n g a n d P l a y i n g A u d i o F i l e s
R e c o r d i n g S o n g S a m p l e s
1. Make sure your phone is on and
paired to HandsFreeLink (see
page 27).
• Press () or () on the audio
control panel.
• Press (+) or (-) on the remote
audio controls.*
There are two ways to skip through audio files:
2. Press USB/AUX repeatedly until
“Bluetooth Audio” appears.
3. Press “play” on your phone;
sound is redirected to the audio
system. Make sure the volume
on your phone is adjusted.
*iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. iPod not included.
* not supported on all phones
P l a y i n g Bluetooth A u d i o F i l e s
S k i p p i n g
Bluetooth A u d i o F i l e s
N o t e F u n c t i o n
*
(Te c h /Adva n c e Pa ckage )
Store up to 30 ten-second recordings of songs and song information from XM
®
Radio.
3332
* Active XM Radio subscription required.
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:04 PM Page 18
HARD DIS C DRI VE (HDD ) AU DIO (Tech/A d vance Packag e )
Automatically record CDs onto your vehicle’s hard drive (by system default). Songs
begin to record once a CD is inserted into the disc slot.
P l a y i n g H D D A u d i o F i l e s
S e a r c h i n g f o r M u s i c
1. Press AUDIO.
2. Press HDD.
3. The first song of the last
recorded album or the last
song selected plays. Use ()
or () or (+) or (-) to skip
through songs.
1. Push the selector up to select
MUSIC SEARCH.
2. Select one of the categories.
3. Select a track and press ENTER
to begin play.
35
34
S O N G B Y V O I C E
T M
( S B V ) ( i P o d ® / H D D )
Play songs from your iPod and HDD from most navigation/audio screens by using
simple voice commands.
P l a y i n g A u d i o F i l e s U s i n g V o i c e C o m m a n d s
U s i n g t h e “ P l a y ” C o m m a n d
Press and release the Talk button before you give a command.
The system
provides voice
feedback and
lists possible
matches.
The system
plays the
selection
and returns
to the Search
Mode
screen.
Say “iPod
search” or
“HDD search.”
Say “Play”
and one of
the options on
the Search
Mode screen.
For example,
say “Play Artist
XYZ.”
Say the
number of the
corresponding
selection you
wish to play.
For example,
say “Four.”
if exact
match
found
if exact
match
not found
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:05 PM Page 19
P l a y i n g A u d i o F i l e s U s i n g V o i c e C o m m a n d s ( c o n t i n u e d )
Press and release the Talk button before you give a command.
U s i n g t h e “ L i s t ” C o m m a n d
The system
provides
voice
feedback
and lists
possible
matches.
A list of tracks
from the
selected artist
displays.
Say “iPod search”
or “HDD search.”
Say “List” and
one of the
options on the
Search Mode
screen. For
example, say
“List Artist XYZ.”
Say the
number of
your selection.
For example,
say “One.”
The system
plays the
selection and
returns to the
Search Mode
screen.
Say the
number of
the artist.
For
example,
say “Four.”
if exact
match
found
if exact
match
not found
36
COLLISION MITIGATION BRAKING SYSTEM (CMBS) (Advance Package)
Alerts you to the possibility of a front-end collision and helps reduce the severity of the
collision if you are unable to avoid it.
Stage 2
Provides further warning
by lightly retracting the
seatbelt and applying
light brake force. A
beep sounds and
“BRAKE” continues to
flash on the MID.
Stage 1
Senses a quickly
approaching object
and prompts you to
take preventive action
by flashing a “BRAKE”
warning on the MID.
Stage 3
Applies stronger
seatbelt retraction and
brake force to prepare
the driver and front
passenger for impact.
= Brake Force = Brake Force
T u r n i n g C M B S O f f / O n
CMBS Off
You hear a beep and the
CMBS indicator turns on.
CMBS OFF
CMBS On
You hear a beep, a message
appears on the MID, and the CMBS
indicator turns off.
* Depending on the circumstances, CMBS may not go through all of the alert stages before initiating the last stage.
3 S t a g e s o f C M B S *
CMBS can be turned off/on by pressing and holding the CMBS OFF button
on the dashboard.
37
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 2:06 PM Page 20
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
Acura 2011 ZDX is an innovative and feature-rich vehicle that offers a wide range of advanced technology options to enhance your driving experience. With its sleek design and cutting-edge features, the Acura 2011 ZDX is the perfect choice for drivers who demand both style and substance.
Here are some of the key capabilities of your new Acura 2011 ZDX:
- Blind Spot Information System (BSI) uses radar sensors to detect vehicles in your blind spots and alerts you with a visual indicator in the side mirrors.
- Bluetooth® HandsFreeLink® allows you to make and receive calls, stream music, and control your smartphone using voice commands.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Honda Pilot Quick start guide
-
-
Honda Civic Hybrid Quick start guide
-
-
-
-
-
-
-