Sophos UTM 110 Mounting instructions

Category
Mounting kits
Type
Mounting instructions

Sophos UTM 110 is a high-performance network security appliance that provides comprehensive protection for your network. It combines firewall, intrusion prevention, web filtering, and antivirus/anti-malware protection in a single, easy-to-manage solution. With UTM 110, you can protect your network from a wide range of threats, including viruses, malware, hackers, and spam. It also provides advanced features such as application control, traffic shaping, and VPN connectivity.

Sophos UTM 110 is a high-performance network security appliance that provides comprehensive protection for your network. It combines firewall, intrusion prevention, web filtering, and antivirus/anti-malware protection in a single, easy-to-manage solution. With UTM 110, you can protect your network from a wide range of threats, including viruses, malware, hackers, and spam. It also provides advanced features such as application control, traffic shaping, and VPN connectivity.

Mounting Instructions
UTM 110/120 Rack Mounting Kit
Scope of supply
The rack mounting kit can only be used with UTM 110/120 rev. 5.
In addition to the rack mounting kit contents, you will need a long-handled
Phillips-head screwdriver.
Attach the rack mounting kit device holders
to the chassis
Secure the device holders to the appliance using four screws on both sides.
The device holders must only be fixed to the appliance by means of the
supplied screws. Screws with other dimensions might damage the appliance.
Install the power adapter
Place the adapter on the bracket. Pay attention to the direction of the power
outlet of the adapter. Secure the position of the adapter with the supplied
bevel.
Attach the power adapter bracket either to the left or right side of the rack
mounting kit.
2 device holders (left, right)
1 bevel, 1 adapter bracket, 14 screws
Sophos UTM 110/120 Rack Mounting Kit Mounting Instructions
Sales DACH
Deutschland, Österreich,
Schweiz
Tel: +49 (0) 611 5858-0
Tel: +49 (0)721 255 16-0
United Kingdom Sales:
Tel: +44 (0)8447 671131
North American Sales:
Toll Free: 1-866-866-2802
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Boston, USA | Oxford, UK
© Copyright 2012. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners.
Sophos Quick Start Guide 02.12v1.dNA
Lieferumfang
Das Rack Mounting Kit kann nur für das Appliance-Modell UTM 110/120
rev. 5 genutzt werden.
Für die Montage des Rack Mounting Kit benötigen Sie einen langen
Kreuzschlitzschraubendreher.
Montieren Sie die Gerätewinkel
an das Gehäuse
Befestigen Sie die Gerätewinkel an beiden Seiten der Appliance mit jeweils
vier Schrauben.
Die Gerätewinkel dürfen an der Appliance nur mit den mitgelieferten
Schrauben befestigt werden. Schrauben mit abweichenden Maßen können
das Gerät beschädigen.
Montieren Sie das Netzteil
Platzieren Sie das Netzteil auf dem Netzteilhalter. Beachten Sie dabei am
Netzteil die Richtung des Steckdosenanschlusses. Fixieren Sie das Netzteil
auf dem Halter mit dem im Lieferumfang enthalten Sicherungswinkel.
Sie können den Netzteilhalter an die linke oder an die rechte Seite vom Rack
Mounting Kit montieren.
2 Gerätewinkel (links, rechts),
1 Sicherungswinkel, 1 Netzteilhalter,
14 Schrauben
  • Page 1 1
  • Page 2 2

Sophos UTM 110 Mounting instructions

Category
Mounting kits
Type
Mounting instructions

Sophos UTM 110 is a high-performance network security appliance that provides comprehensive protection for your network. It combines firewall, intrusion prevention, web filtering, and antivirus/anti-malware protection in a single, easy-to-manage solution. With UTM 110, you can protect your network from a wide range of threats, including viruses, malware, hackers, and spam. It also provides advanced features such as application control, traffic shaping, and VPN connectivity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages