ActionTec WCB3000N Basic Instructions

Brand: ActionTec

Model: WCB3000N

Type: Basic Instructions

Getting Started

Installing FiOS Network Extender

Flip this Installation Guide over to continue

If your coaxial cable is already connected to a set top box

you will need to use the Coaxial Splitter that is included in

your kit box.

Verizon FiOS Network Extender

u The Verizon FiOS Network Extender works as a Wireless

Network Adapter to extend your existing Wi-Fi network.

u It uses the same Wi-Fi network name (SSID) and wireless

credentials as your Verizon FiOS Router.

u You can surf the Internet wirelessly from different locations

within your home or business without having to change from

one wireless network to another.

Your Verizon FiOS Network Extender Kit Includes –

• One WCB3000N FiOS Network Extender

• One Power Adapter

(External, 5V DC, 2A made by Actiontec, Model #WA-10P05FU)

• One Ethernet Cable

• Two Coaxial Cables

• One Coaxial Splitter

Setting up the FiOS Network Extender

Part No: 0530-0689-002 QS1201/0913

Step

1 Place the FiOS Network

Extender in a room of your home or

business where the Wi-Fi signal is

weak.

Step

2 Locate the Coaxial Cable

connected to the wall outlet in the

room where you want to install the

FiOS Network Extender. Connect the

coaxial cable from the Wall Outlet to

the Coax In Port on the back of the

FiOS Network Extender.

a. Disconnect the Coaxial Cable

from the wall outlet and connect

it to one of the two OUT Ports on

the Coaxial Splitter.

b. Remove one of the two Coaxial

Cables from the box. Plug one

end of the Coaxial Cable into the

IN Port on the Splitter and the other

end into the Coaxial Wall Outlet.

c. Remove the 2nd Coaxial Cable

from the box. Plug one end into

the OUT Port on the Splitter and

the other end into the Coax In

Port on the back of the FiOS

Network Extender.

VerizonWCB3000N_QS12_Verizon look WBR QS 10/1/14 2:23 PM Page 1

FiOS

Network

Extender

Basic Instructions

Getting Started

Installing FiOS Network Extender

WCB3000N

trademarks of Actiontec Electronics, Inc. in the US or other countries. All other names are properties

of their respective owners.

This product has a 1-year Limited Warranty

from the date of purchase. Go to

http://www.actiontec.com/products/warranty.php

for more information.

Step

3 Plug one end of the

Power Adapter into the Power

Port on the back of the FiOS

Network Extender. Plug the

other end of the Power

Adapter into a nearby

Electrical Power Outlet.

Step

4 Wait until the Coax

Light on the front of the FiOS

Network Extender is Green.

This may take a couple of

minutes.

Step

5 Connect a Wi-Fi device and surf the Internet wirelessly.

Congratulations!

You have successfully extended your Wi-Fi network.

For additional information go to

www.verizon.com/quickguides

VerizonWCB3000N_QS12_Verizon look WBR QS 10/1/14 2:23 PM Page 2

ActionTec WCB3000N Basic Instructions

ActionTec WCB3000N Basic Instructions

ActionTec WCB3000N Basic Instructions

Related papers

Other documents