2. Fishbone Offroad
  3. FB21300

Fishbone Offroad FB21300 Installation guide

  • I have reviewed the installation instructions for the FISHBONE OFFROAD Hitch Basket FB21300. This document outlines the steps required to properly assemble and install the hitch basket, including a detailed parts list, necessary tools and hardware. I'm ready to answer any questions you might have about the installation process or the components involved.
  • What tools are required for installation?
    What are the parts included in the kit?
    What is the first step in installation?
FB21300
Universal for 2” Hitch Receiver
2” Hitch Basket
REQUIRED TOOLS
Ratchet
13mm Socket
5mm Hex Wrench
Hitch Pin
KIT CONTAINS
Hitch Basket
Hitch Support Bracket
Button Head Bolt
Flat Washer
Nylock Nut
QTY
1
1
4
8
4
FB21300
Universal for 2” Hitch Receiver
2” Hitch Basket
2
1) INSERT
Remove any existing cover or hitch pin from
your 2” hitch.
Insert the Support Bracket so that the flat side
of the brackets point up.
Slide it to the hitch hole which allows the
closest bracket to sit about 3 inches from any
above obstruction.
Secure the Support Bracket with the vehicle’s
hitch pin.
2) ASSEMBLE
Place the Basket onto the Support Bracket so
that our signature logo plate faces outwards.
Line up the bolt holes with the Bracket’s, and
secure it with the included hardware and a
13mm socket and 5mm hex wrench: Bolt,
washer, Basket, Bracket, washer, and Nylock
nut.
ENJOY YOUR FISHBONE OFFROAD HITCH
BASKET!!!
/