2. RAMPAGE PRODUCTS
  3. Billet Style Locking Gas Cover

RAMPAGE PRODUCTS Billet Style Locking Gas Cover Installation guide

  • Hello! I am an AI chatbot trained to assist you with the RAMPAGE PRODUCTS Billet Style Locking Gas Cover Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Instructions
Billet Gas Door
Part No. 75001, 75007, 85001, 85007- 2007-10 Jeep Wrangler 2dr and
4dr non-locking and locking gas door.
Parts List:
1- Gas Door
2- Keys for locking version
4-#4 x 0.25” Self tapping SS Phillips flat head screws (4 Extra included)
Tools Needed
Phillips screwdriver
Installation:
1) Place gas door over filler opening so the door opens toward the front of vehicle.
See fig. 1
2) Apply firm constant pressure to keep gas door against the side of the vehicle. Begin inserting
the first screw (#4 x 0.25” Self tapping SS Phillips flat head screws) using the top hole of the
door, then proceed in a clockwise manner to the next hole. See Fig 2. The screw will
penetrate the plastic housing directly in the center of the ring. Do not over tighten.
Fig 1.
Fig 2.
Rampage Products 9225 Stellar Ct. Ste C. Corona Ca., 92883
Phone: (951) 277-4949 Fax: (951) 277-2295
Web: www.rampageproducts.net
Made in Taiwan
/