Operation temperature range
Humidity
Dimensions
Weight
Guarantee
Main voltage
Max.Consumption
Degrees of cover protection
Output
Produced in accordance with
connected with “R” of the detector
10 mΑ
IP 20
high illumination LED
ο
0 to 60 C
ΕΝ 61000-6-3, ΕΝ 50130-4
up to 95% relative humidity
68x68x35mm
2 years
50gr.
TECHNICAL SPECIFICATIONS
Operation temperature range
Humidity
Dimensions
Weight
Guarantee
Main voltage
Max.Consumption
Degrees of cover protection
Output
Produced in accordance with
connected with “R” of the detector
10 mΑ
IP 20
high illumination LED
ο
0 to 60 C
ΕΝ 61000-6-3, ΕΝ 50130-4
up to 95% relative humidity
68x68x35mm
2 years
50gr.
TECHNICAL SPECIFICATIONS
921572000_09_013921572000_09_013
TO TH E ZONE
OF THE PA N EL
termin al
resist or
DET ECTOR `S
BAS E
DET ECTOR `S
BAS E
+
+
RR
BS-572 BS-572
-R
O
U
T
-
-
L
N
I
T
+
U
R
O
N
+
L
I
-R
O
U
T
-
-
L
N
I
T
+
U
R
O
N
+
L
I
TO TH E ZONE
OF THE PA N EL
termin al
resist or
DET ECTOR `S
BAS E
DET ECTOR `S
BAS E
+
+
RR
BS-572 BS-572
-R
O
U
T
-
-
L
N
I
T
+
U
R
O
N
+
L
I
-R
O
U
T
-
-
L
N
I
T
+
U
R
O
N
+
L
I
BS-572 is a remote indicator LED which is
co-operated with any detector.
It is installed away from the detector and
lights on in case when a detector is
activated.
If one room has more than one detectors
then we can connect the BS-572 with all
the detector's so as the LED will be
activated when there is an alarm in one of
the detector's.
The advantage of using the BS-572 is the
decrease of the number of the zones
which are necessary for the covering of the
It is used in buildings that the separated in
small places (hotel's rooms, hospitals) so
as to be controlled easily. Using the BS-
572 we can realized in which room there is
an alarm without to open the door of the
room.
GENERAL GENERAL
BS-572 is a remote indicator LED which is
co-operated with any detector.
It is used in buildings that the separated in
small places (hotel's rooms, hospitals) so
as to be controlled easily. Using the BS-
572 we can realized in which room there is
an alarm without to open the door of the
room.
If one room has more than one detectors
then we can connect the BS-572 with all
the detector's so as the LED will be
activated when there is an alarm in one of
the detector's.
It is installed away from the detector and
lights on in case when a detector is
activated.
The advantage of using the BS-572 is the
decrease of the number of the zones
which are necessary for the covering of the
building. Usually is installed away from the room
and above of the room door which is to be visible
from a long distance.
Connections
The connection of the LED with the detectors is very
simple. When, we finish with the connection of the
detectors to the panel we connect the grip R (point)
of the LED with the grip R (point) of the detector and
the + (point) of the LED with the + (point) of the zone.
When we want to connect the LED with more than
one detectors then we follow the above connection
for all the detectors.
In the below scheme is visible the connection of two
BS-572 with two detectors.
building. Usually is installed away from the room
and above of the room door which is to be visible
from a long distance.
Connections
The connection of the LED with the detectors is very
simple. When, we finish with the connection of the
detectors to the panel we connect the grip R (point)
of the LED with the grip R (point) of the detector and
the + (point) of the LED with the + (point) of the zone.
When we want to connect the LED with more than
one detectors then we follow the above connection
for all the detectors.
In the below scheme is visible the connection of two
BS-572 with two detectors.
BS-5 72 Remote detector LED BS-5 72 Remote detector LED
Thank you for your trust in our products
Olympia Electronics - European manufacturer Olympia Electronics - European manufacturer
Thank you for your trust in our products