Humandata ACM-308-10 User manual

Brand
Humandata
Model
ACM-308-10
Type
User manual

This manual is also suitable for

HuMANDATA LTD.
Cyclone 10 LP E144 FPGA Board
ACM-308 Series Rev2
User’s Manual
Ver. 2.0
Table of Contents
Revision History .............................................................................................. 1
Introduction .................................................................................................... 1
1. Specifications ..................................................................................................... 2
2. Overview ............................................................................................................ 3
2.1. Name of Parts .......................................................................................................3
2.2. Block Diagram ......................................................................................................4
2.3. Power Supply ........................................................................................................4
2.4. Clock ......................................................................................................................4
2.5. User LED ..............................................................................................................5
2.6. User Switch ..........................................................................................................5
2.7. Setting Switch ......................................................................................................6
2.8. JTAG Connector ...................................................................................................6
3. FPGA Configuration ........................................................................................... 7
4. Configuration Device Programming ................................................................... 7
4.1. Generating jic file .................................................................................................7
4.2. Programming Configuration Device ...................................................................7
5. FPGA Pin Assignment ........................................................................................ 8
6. Additional Documentation and User Support ..................................................... 9
Precautions
Do Not
1. This product uses ordinary off-the-shelf electronic components, and is therefore inappropriate for use in
applications that require special quality or reliability and are expected to protect human lives or prevent
accidents, such as safety mechanisms in fields including space, aeronautics, medicine, and nuclear
power.
2. Do not be used underwater or in high-humidity environments.
3. Do not be used in the presence of corrosive gases, combustible gases, or other flammable gases.
4. Do not turn on power when circuit board surface is in contact with other metal.
5. Do not apply voltage higher than rated voltage.
Attention
6. This manual may be revised in the future without notice owing to improvements.
7. All efforts have been made to produce the best manual possible, but if users notice an error or other
problem, we ask that they notify us.
8. Item 7 notwithstanding, HuMANDATA cannot be held liable for the consequences arising from use of
this product.
9. HuMANDATA cannot be held liable for consequences arising from using this product in a way different
from the uses described herein, or from uses not shown herein.
10. This manual, circuit diagrams, sample circuits, and other content may not be copied, reproduced, or
distributed without permission.
11. If the product emits smoke, catches fire, or becomes unusually hot, cut the power immediately.
12. Be careful of static electricity.
13. This product may be subject to the export restrictions of Japan, the United States, or other countries.
Purchasers are responsible for properly observing export restrictions.
14. HuMANDATA firmly refuses to export (including reexporting) products to countries or regions subject to
export restrictions.
Product Warranty and Scope of Support
1. HuMANDATA guarantees that its products can be assembled as shown in published circuit diagrams and other design documents.
There may be differences between actual components or their prescribed quantities and model numbers and those shown in circuit
diagrams.
2. Except for the guarantee in item 1, above, no guarantees whatsoever are made. When assembling the product as shown in a circuit
diagram is impossible, and the problem can be solved by revising the diagram, HuMANDATA will revise the diagram. When a problem
can be solved only by replacing components or modifying the product, HuMANDATA will take back the product to replace it with a
properly functioning product.
3. If the problem is minor, HuMANDATA will sometimes describe how to make the revision or modification, and ask the customer to
solve the problem.
4. HuMANDATA will determine how to honor the warranty, as through repair, replacement, return, or other action. The customer cannot
specify what action to take.
5. FPGAs and other components used in products sometimes have characteristic defects. Returns and replacements are not possible
even if such defects are discovered, whether before or after purchase.
6. HuMANDATA shall not be obligated to inform customers about defects in the main components used in products.
7. HuMANDATA shall not be obligated to provide support for products, or to provide support for the software of other companies needed
to use HuMANDATA products.
8. Published documentation shall be limited to that published by HuMANDATA at the time of product purchase, and HuMANDATA shall
not be obligated to provide any other documentation.
9. When repairs or replacements are provided under warranty in Japan, purchaser shall pay shipping charges for shipping to
HuMANDATA, and HuMANDATA shall pay shipping charges for shipping to purchaser.
10. When shipping from outside of Japan, purchaser shall pay all expenses including shipping charges and taxes.
11. Under whatever circumstances, HuMANDATA shall provide support for its products for a maximum of one year after shipping from
factory.
12. The Warranty is not applicable and support ends in the event of fire, storm and flood damage, earthquakes, lightning strikes, and
other natural disasters, as well as conflict or other occurrences.
13. Purchaser is assumed to have read and understood all the above when purchasing a HuMANDATA product.
Limitation of Liability
1. Purchasers assume all liability associated with the use of this product.
2. HuMANDATA assumes no liability whatsoever for any direct, indirect, special, incidental, or consequential damages arising from the
use of this product, even if HuMANDATA has been advised of the possibility of such damage, whether legal or in tort.
3. At the time this product is purchased, items 1 and 2 above shall be deemed to have been confirmed by purchaser.
Trademarks and Other Considerations
1. This manual uses various companies’ trademarks in places.
2. HuMANDATA is this company’s registered trademark.
HuMANDATA’s Philosophy
1. HuMANDATA endeavors to raise product quality. We continually make detailed improvements and adjustments that are not shown
in circuit diagrams.
2. HuMANDATA actively publishes, on the Web and in other ways, information considered useful to customers. Examples would be
how to use FPGAs and how to use development tools.
3. HuMANDATA makes efforts for the long-term provision of products and for continuing their long-term support.
4. Instead of concealing small product problems and documentation errors, HuMANDATA makes them public
5. HuMANDATA abides by Japanese law and its spirit. We make no transactions with purchasers who commit illegal acts.
1
ACM-308 Series v2.0
Revision History
Date
Revision
Description
Jun. 25, 2021 v2.0
Revised: Product Revision to Rev2
Change: Configuration device
Introduction
Thank you for buying our product ACM-308.
This is an evaluation board equipped with an Intel (Altera) FPGA Cyclone 10 LP,
power, clock, and configuration circuit.
It can provide you with very convenient and easy-to-use development environment.
2
ACM-308 Series v2.0
1. Specifications
Model Name
ACM-308-06 ACM-308-10 ACM-308-16 ACM-308-25
FPGA
10CL006Y
E144C8G
10CL010Y
E144C8G
10CL016Y
F144C8G
10CL025Y
E144C8G
Power Input
DC 3.3 [V]
User I/Os
Config. Device
EPCQ16ASI8N (Intel, 16Mbit)
On-Board Clock
User LED
1
User Switch
Power-On Reset
240 [ms] typ. (Configuration Reset Signal)
User I/O Connectors
dia. 0.9 [mm], 100[mil]/2.54 [mm] pitch
PCB
4 Layer FR-4 t1.6 [mm] Immersion gold
JTAG Connector
Status LEDs
Power (red), Done (blue)
Dimensions
Weight
16 [g] typ.
Accessories
DIL 40-pin headers (Cuttable) x2
RoHS Compliance
* There may be cases that these parts and specifications are changed.
3
ACM-308 Series v2.0
2. Overview
2.1. Name of Parts
Component Side
Solder Side
(No components on the solder side)
User I/O (CNB)
User LED
Setting SW
User SW
Done LED
Power LED
User I/O (CNA)
Config. ROM
FPGA
Oscillator
JTAG
4
ACM-308 Series v2.0
2.2. Block Diagram
2.3. Power Supply
This board operates from single DC 3.3 V power supply from the CNA. External
power supply should be sufficient and stabilized. Please do not apply over 3.3V
voltage.
You can input configurable I/O power supply from CNB as VIO(B). Some I/Os
belong to CNA (IOA22 – IOA27) are powered by VIO(B).
For more details, please refer to circuit schematics and FPGA data sheet.
2.4. Clock
An oscillator, 30 MHz (U6), is equipped as on-board clock. External clock can be
input from user I/O connectors. For more details, please refer to circuit schematics.
Power LED (3.3V)
DONE LED
V IO(B) INPUT
3.3 V INPUT
JTAG
Buffer
28
User LED
Oscillator
30MHz
Power Circuit
2.5V, 1.2V
JTAG
Config. Mode Switch
Config. Device
( 1 6 Mbit )
Slide Switch
Ext ernal CLK ( option)
User I/Os CNB
28
User I/Os CNA
Ext ernal CLK ( option)
ACM-308 Rev.A
POR
Cyclone 10 LP
10CL006YE144C8G
10CL010YE144C8G
10CL016YE144C8G
10CL025YE144C8G
5
ACM-308 Series v2.0
2.5. User LED
You can use L2 for general purpose. This is active low.
The LED is assigned to the multipurpose pin. Please refer to the
following screenshot.
Device and Pin Options – Dual-Purpose Pins – Data[1]/ASDO – Use as regular I/O
2.6. User Switch
You can use SW1[1] for general purpose. This is pulled up, so you can
input low level signal to the FPGA when you push them.
6
ACM-308 Series v2.0
2.7. Setting Switch
You can use SW1 to set a configuration mode of the FPGA.
Please refer to the Intel (Altera) configuration handbook for more details.
SW1
1 2 Configuration
Mode
ASW MSEL
User
ON
PS
User OFF
AS
・PS (Passive Serial) Mode : Access by JTAG
・AS (Active Serial) Mode : Use configuration device
- Access to config. ROM (write and erase data)
- FPGA Configuration using config. ROM (when the board power on)
2.8. JTAG Connector
This connector is used to configure the FPGA and to access to
configuration device in system. Pin assignment is as follows.
CN1
Signal Name
JTAG Pin
Signal Name
TCK
1
2
GND
TDO 3 4 VCC
TMS
5
6
-
- 7 8 -
TDI
9
10
GND
Please pay attention not to attach cables in reverse.
Notice
7
ACM-308 Series v2.0
3. FPGA Configuration
To configure the FPGA via JTAG, select an FPGA icon detected by [Auto Detect]
and assign a sof file.
If configuration is completed successfully, the DONE LED will light up.
4. Configuration Device Programming
To download an FPGA configuration data to the configuration device via JTAG, jic
(JTAG Indirect Configuration) file is required.
To generate a jic file using Quartus, please refer to the following steps.
4.1. Generating jic file
Start Quartus, and open [File] menu and click [Convert Programming Files]
and set items as shown below.
Programming File Type : JTAG Indirect Configuration File (.jic)
Configuration Device : EPCQ16A
Mode : Active Serial
File name : any
1. Open [Flash Loader] and click [Add Device…], then select mounted [Device
name].
2. Open [SOF Data] and Click [Add File…], then select the sof file.
3. Click [Generate]
4.2. Programming Configuration Device
Please set configuration mode switch to AS mode.
Click [Add File…] and select the jic file, then check [Program/Configure] and
click [Start].
8
ACM-308 Series v2.0
5. FPGA Pin Assignment
FPGA banks are divided into two groups as follows.
FPGA Bank Vccio Bank Group
1 V33A A
2
V33A
A
3 V33A A
4
VIO(B)
B
5 VIO(B) B
6
V33A
A
7 VIO(B) B
8
VIO(B)
B
I/O power supply for Bank Group A is fixed to Vccio (3.3V). The power supply for
Bank Group B can be changed.
For more details, please refer to the circuit schematics.
9
ACM-308 Series v2.0
6. Additional Documentation and User Support
The following documents and other supports are available at
https://www.hdl.co.jp/en/spc/ACM/acm-308/
Circuit Schematic
Pin List
Outline Drawing
PCB Drawing
Net List
… and more.
Cyclone 10 LP E144 FPGA Board
ACM-308 Series Rev2
User’s Manual
Ver. 2.0 ........................................... Jun. 25, 2021
HuMANDATA LTD.
Address: 1-2-10-2 F, Nakahozumi, Ibaraki
Osaka, Japan
ZIP 567-0034
Tel: 81-72-620-2002 (Japanese)
Fax: 81-72-620-2003 (Japanese/English)
URL: https://www2.hdl.co.jp/en/ (Global)
https://www.hdl.co.jp (Japan)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Humandata ACM-308-10 User manual

Brand
Humandata
Model
ACM-308-10
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers