2. kuman
  3. KW47
KW47

kuman KW47 User manual

  • Hello! I've read the user manual for the KUMAN KW47 Power Meter. This device helps you monitor the energy usage of your appliances, displaying key metrics like wattage, cost, and cumulative energy consumption. It also includes an overload alarm and the ability to configure your electricity unit price. I am ready to answer any questions you may have about its features and usage.
  • How do I set the unit price of electricity?
    What happens when the current exceeds 16A or power exceeds 3680W?
    How do I reset the device?
    What does cumulative time show?
FUNCTION
RESET
COST UP
DOWN
DAY
KUMAN Power Meter KW47
User Manual
Cumulative Time
Watt/KWh/Voltage/Current/Overload Alarm
Reset Button
Cost/Time/Frequency/Power Factor/Unit Price
Setting Button
Cost Button
Function Button
Energy monitors are a gateway to the inner energy workings of your home. Kuman energy usage moni-
tor KW47 helps you to keep track how much energy your appliance is using and to provide information
about how you can make your home more energy efficient.
Note Get Start on Using This Power Monitor
Overload Alarm
1.Step 1: Make sure the wattage of the device connecting
with this monitor is under 1800W, then connect the device;
2.Step 2: Setting the Unit Price of the Electricity.Long press the “COST” button to get into the unit price setting;
Press the “FUNCTION” button to choose the setting position;
Press the “+”“-” Setting button to choose number from 0 to 9;
Press the “COST” button to confirm the price and exit price setting.
When the current exceeds 16A or the power exceeds 3680W,
the “overload alarm” icon flashes.
Specifications
Operating voltage AC 120V Wattage display 0W-9999W
Voltage display range 0V-9999V
Frequency display 0Hz-9999Hz
Current display 0.0A---15.0A
Cost display range 0.000cost/kWh---99.99cost/kWh
Total kWh and cost display 0.000---999kWh, 0.000---9999cost
Operating Frequency 60Hz
Wide voltage range 110V-130V
Operating current 15A Max
Timing display range 0 second---9999 days
Measurement accuracy ±2%
The monitor has a built-in rechargeable battery. For
the first-time using, please plug in the power supply
to charge.
When you meet problems of no displaying or
no-functioning buttons, please “RESET” the monitor
to test.
When you press the “RESET” button, all the previ-
ous data will be cleared.
7 Modes on Display
Time 00:00 Number Displaying Explanation
Mode 1: Time/ Watt/ Cost
Cumulative Time
Watt
Cost
0 00
w
COST
00
000
Cumulative Time: How long you have monitored the device
(Shows Hours, Minutes, Seconds)
Watt: Real-time current Watt of your device
Cost: How much have you costed (based on the unit price you set)
Mode 2: Time/ Cumulative Electrical Quantity Display/ Time
Mode 3: Time/ Voltage/ Frequency
Cumulative Time: How long you have monitored the device
(Shows Hours, Minutes, Seconds)
KWh: Cumulative Electrical Quantity
Day: How many days you have monitored the device (in Days)
000
KWh
DAY
0000
0
Cumulative Time: How long you have monitored the device
( Shows Hours, Minutes, Seconds)
Voltage: Real-time current Voltage of your device
Frequency: AC frequency of the grid (in hertz)
000
V
HZ
00
00
Mode 4: Time/Current/Power Factor
000
A
POWER
FACTOR
0 0 00
0 00
Cumulative Time
Voltage
Frequency
Cumulative Time
Current
Power Factor
Cumulative Time
KWh
Day
Cumulative Time: How long you have monitored the device
( Shows Hours, Minutes, Seconds)
Current: Real-time electric current of your device (in Amperes)
Power Factor: The power factor of the appliance connected to it
Mode 5: Time/Minimum Power
Cumulative Time: How long you have monitored the device
(Shows Hours, Minutes, Seconds)
MIN Power: The minimum power recorded during operation (in Watts)
000
w
0 0
8
0
Mode 6: Time/Maximum Power
Mode 7: Time/Unit Price
Cumulative Time: How long you have monitored the device
(Shows Hours, Minutes, Seconds)
MAX Power: The maximum power recorded during operation (in Watts)
000
w
00
h
Cumulative Time: How long you have monitored the device
(Shows Hours, Minutes, Seconds)
Unit Price: The unit price you were setting ( For how to set the unit
price before using, please refer to the part above “ Get Start on Using
This Power Monitor”)
000
COST/KWh
000
Cumulative Time
Unit Price
Cumulative Time
MIN Power
Cumulative Time
MAX Power
This energy monitor will be auto gets into Mode 1 when you reset this monitor.
To change to other modes, please press “ Function” button.
For the first 0~60 minutes (00:00) : The 2 figures on the left mean “minutes”, 2 figures on the right mean “seconds”.
After 60 minutes (00:00) : The 2 figures on the left mean “hours”, 2 figures on the right mean “minutes”.
/