Balt 34663 User manual

  • Hello! I've reviewed the assembly instructions for the Balt Chair 34663. This document outlines the steps for assembling the chair, including installing the casters, cylinder, cover and seat. I'm here to help you with any questions you might have about the assembly process or the chair parts.
  • How many casters are included with the chair?
    What is the purpose of the pneumatic cylinder?
    What is used to lock the back in place?
Titan Chair #34663
1. Push in five Casters (A) into Base (E)
2. Insert Pneumatic Cylinder (C) into top of Base (E)
3. Snap on two piece Cover (D) around center of
Base (E)
4. Place Telescoping Sleeve (B) over Pneumatic
Cylinder (C)
5. Insert the top of the Pneumatic Cylinder(C) into
the large hole in the bottom of the Seat(P-1)
6. Insert the Back (P-2) into the back post slot in the
Seat (P-1)
7. Tighten the large knob on the side of the Seat(P-1)
to lock the Back (P-2) and back post into place
P-1 Seat
1 EA P-2 Back
1 EA
A Caster
5 EA B Sleeve
1 EA
PARTS
E Base
1 EA
D Cover
1 EA
C Cylinder
1 EA
Assembly Instructions
P1
P2
34663_10/12/09
C
E
D
A
B
Large Knob
/