Please read instructions before use and retain for future reference.
PRODUCT CODE
Portable 300W Power Station
ILLUSTRATION
H297
PRODUCT FUNCTIONS ILLUSTRATION
► Functions
► Display Screen
1 Remaining output time: Calculates the remaining output time automatically
according to different electrical loads.
2 Battery level indicator: According to the percentage, the power is divided into
11 grids. The more power indicator grids, the more power.
3 Low battery notification: Low battery warning indicator will flash when the
battery level is lower than 10%.
4 Battery percentage display: Shows the battery percentage.
5 Thermometer icon : When the device temperature is too high, the thermometer
icon will flash.
6 Output status indicator: Displays output status including DC, AC, USB-A,
USB-C and LED.
7 Input Power: Displays the charge power.
8 Output Power: Output power drawn by the electrical load.
9 Output Frequency: When the 50Hz or 60Hz icon is on, the AC output frequency
is 50Hz or 60Hz.
Cooling Fan
Light Switch
LED Flashlight
Handle AC Output
AC Switch
USB Switch
Type-C Output / Input
Anderson Input
AC Adaptor Input
USB 3.0 Output
USB Output DC Switch
Car Charging Output
12V/DC Output
USER GUIDE
METHOD OF CHARGING
1 It is recommended to keep the device fully charged before using it for the first time.
2 To switch on the 5W LEDs, simply press the light switch labled
3 To power up one of the outlets, simply press the corresponding switch labeled with
➅
, ➆ or . The function icon on the screen will light up to show that it's selected.
You can use the Power station to power your devices as needed. The type-C outlet
is plug-and-play and does not need selecting for either input or output use.
4 You can adjust the AC supply frequency to match the instructions in the equipment
manual or local standards by pressing the ➅ button three times. The current
frequency will be shown on the screen.
5 When the outlet is not in use, please press the corresponding button to switch it off
and save the power. If the icon on the screen is off, it indicates that the power to
the outlet is off.
6 High and low temperature may affect the service time of the product, so it should be
used within the working temperature of -10ºC to 40ºC.
There are two charging ports (diameters: 5.5mm*2.1mm) on this device. Please use the
standard charger for charging.
When the device is being charged, the charge power and battery level will be displayed
on the screen. When it is fully charged, it will automatically stop charging.
When charging the product through the adapter it will fully
charge in approximately 3 hours. Charging time can be
reduced to 1.5 hours when simultaneously charging with a
100W Type-C 20v/5A adapter and the supplied AC adapter.
It takes about 6 hours to get this device fully charged through
the car cigarette lighter socket.
(Please keep the car engine running in case it drains the car battery.)
When charging the product using a 100W solar panel it will fully
charge in approximately 4 hours.
TECHNICAL PARAMETERS
PACKING LIST
1 x Portable power station, 1 x power adapter, 1x product instruction manual.
Technical Indicators Parameters
Battery energy 294.4Wh
Nominal Voltage 220-240V 50Hz
300W (instantaneous peak power 500W)
MAX 20V/5A
5V/2.4AUSB Output
5V/3A, 9V/2A,12V/1.5A 18W Max
(12V±1.5V)/10A
22V/5A, fully charged in about 3 hours
(5W) Common & high brightness
& slow & fast blinking
About 50 minutes
-10ºC to 40ºC
260 x 150 x 180mm
5.1kg
Nominal Power
TYPE-C Output
AC
Ouput
DC
Output USB 3.0 Output
DC Output
Adapter
Flashlight
AC 600W output working time
Operating Temperature
Dimensions
Parameters
*All the data above are collected through experiments.
TROUBLESHOOTING
Problems
Charging
failures
No power to
the outlet
Causes Solutions
The indicator on the screen fails
to light up; there could be bad
connection between the adapter
and the device.
Check if there is a bad connection
between the adapter and the socket
and make sure the socket is powered.
The indicator on the screen fails
to light up. And there is green
light on the adapter.
Check if there is a bad connection
between the adapter and the device;
please contact our after-sales
service team for further help.
The indicator on the screen lights
up, but still no charging.
Please return the power station to
the store from which it was
purchased for advice. Alternatively
email [email protected].
The ambient temperature is too
low.
Please charge the device where the
ambient temperature is greater
than 0˚C.
Other causes.
Please return the power station to
the store from which it was
purchased for advice. Alternatively
email [email protected].
The poor connection between
the device and the cable.
Keep the device and the cable in
good connection. Please use the
universal connectors.
The circuit protection is activated
owing to overload.
For high current DC output, please
use a car cigarette lighter adapter
cable to connect. For AC output,
please make sure the power of the
electrical equipment conforms to the
specification of this device.
The battery power of the device
gets low. Please recharge the device.
The ambient temperature is too
low.
Please use the device where the
ambient temperature is greater than
-10˚C in case the low temperature
protection is activated.
The power drawn by the load is
far more than what is allowed in
the specification.
Please stop using the device.
TROUBLESHOOTING
Problems Causes Solutions
No Power to
the Outlet
Other causes.
Please return the power station to
the store from which it was
purchased for advice. Alternatively
email [email protected].
The power
is cut off
when the
device is
discharging
The battery power of the device
gets low. Please recharge the device.
The power of the electrical
equipment gradually exceeds
what is allowed in the
specification.
Please use the equipment after
power de-rating.
The over-temperature protection
is activated.
Please use the device after it cools
down.
Short circuit of this device.
Other causes.
Please return the power station to
the store from which it was
purchased for advice. Alternatively
email [email protected].
WARRANTY
Warranty Terms
1 The warranty period is valid for twenty four months from the date of purchase.
Please retain your proof of purchase (invoice or sales slip) and original packaging.
2 During the warranty period, if the product itself has quality problems or
malfunctions, please return the power station to the store from which it was
purchased for advice. Alternatively email [email protected].
3 The company reserves the right to modify and interpret all content.
This warranty does not cover product problems
related to the following
1 The product is damaged owing to failure to follow operation instructions or misuse.
2 The warranty sticker on the product is removed or unauthorized teardown of the
product.
3 The product number has been changed or does not conform to this manual.
4 The product was placed in an extreme environment not for its reasonable use
including immersion, shaking, high temperature, and corrosive environment, which
led to evident damage of the product.
5 Product failure caused by external causes beyond our reasonable control including
accidents and natural disasters.
Cape Town - 9 Racecourse Road, Milnerton
Johannesburg - 72 5th Street, Wynberg, Sandton
Durban - Talksure House, 62 Umhlanga Ridge Boulevard, Umhlanga
Web: www.eurolux.co.za
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate any such products from other waste types and recycle
it responsibly at your local facilities.
WARRANTY
ENVIRONMENTAL PROTECTION
1 Maintain your children's safety by keeping this product out of their reach.
2 Please do not attempt to open or tamper with this product. Any unauthorized
disassembly will void the warranty.
3 Please use the accessories supplied with the device or recommended by a
qualified technician.
4 Please use the product in a well-ventilated and dry place. Please do not charge the
product if the ambient temperature is below -10ºC.
5 Please keep this product away from flammable substances and high-temperature
environments.
6 When put in storage, please keep the battery power level between 50% and 70%, and
store it in a ventilated and dry place.
7 When put in storage, please charge the product at least once every three months.
8 Please handle this product with care, it is not designed to withstand forceful impact.
9 To prevent electrical shock or fire hazard, avoid using broken or defective cables.
10 Do not forcefully shutdown the power station.
11 AC output port supports 300W resistive load.
12 When all output ports are used at the same time, the maximum output power
shall not exceed 300W.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
UTEPO UPS300-2 User manual
-
CTECHi G240N Portable Power Station User manual
-
EcoFlow EFR600 RIVER 2 Power Station User manual
-
-
Jackery G1534A1800AH Owner's manual
-
EcoFlow RIVER 2 User guide
-
Jackery JE-300B User manual
-
NRGVault PV1500 1500W Portable Power Station User manual
-
-
TOTALCOOL TP500 User guide
