2. Eurolux
  3. D95

Eurolux D95 Owner's manual

  • Hello! I'm a chat assistant and I've reviewed the user manual for Eurolux D93 and D95 downlights. This document includes essential information about the products’ specifications, installation procedures, safety precautions, and cleaning instructions. I'm here to help answer any questions you may have regarding these downlights. Feel free to ask!
  • What type of lamp is compatible with D93 and D95 models?
    What is the IP rating for these downlights?
    What is the input voltage for D93 or D95 downlights?
    What is the required cut-out size for installation?
Gypsum Recessed Downlight
D93 / D95 Including: 1 x LED maximum 35W GX5.3 12V
ILLUSTRATIONS
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this
marking must not be disposed of with other household or commercial waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate any
such products from other waste types and recycle it responsibly at your local facilities.
D93 / D95
PRODUCT CODE
Please read instructions before commencing installation and retain for
future reference.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
email: [email protected], web: www.eurolux.co.za
D93 D95
•Fitting: Gypsum
•Lamptype: D93 / D95 Including 1 x LED maximum 35W GX5.3 12V
•InputVoltage: 220V - 240V ~ 50/60Hz
 OutputVoltage: 12V
•Protectionagainstelectricshock: Class 3. SELV does not require earthing.
•IPRating:20. Protected against solid foreign objects of 50mm Ø and greater. Not
protected against water.
• Commercial / domestic use
• Not suitable for outdoor use
•Maximumambienttemperaturerange: 20ºC - 40ºC
•Dimensions:
D93: (L)122mm x (W)122mm x (D)55mm
D95: (L)120mm x (W)120mm x (D)64mm
•Cut-out: D93 / D95 125 x 125
Before installation always ensure the power supply is turned off.
1. Cut a hole in the ceiling as per “cut out”.
2. Connect mains to the low voltage 230V on primary side, and the luminaire to the 12V
secondary side.
3.Insert downlight into ceiling hole ensuring the mains lead is not trapped.
 4.Pushttingupwardstosnaprmlyintoposition,ushwithceiling.
5. Insert the lamp by locating the pin connection holes within the lamp
holder, gently pushing the lamp into the holder and twisting into place.
6. Attach shade
7. Reconnect power.
 NOTE:Alwaysallowthelamptocoolsufcientlybeforechanging.
NOTE: Allow a minimum gap of about 200mm in height from downlight to ceiling / any materials
above the downlight and 50mm all around the sides of the downlight.
D93/D95-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Ensurethatthecorrectlamptypeandwattageistted.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Useasoftclothtoclean.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
/