CTA ADD-PARAMULTI Owner's manual

Brand: CTA

Model: ADD-PARAMULTI

Type: Owner's manual

Multi-Screen Flexible Desk

Mount Kiosk w/ Quick Release

PAD-PARAMULTI3

INSTRUCTION - MANUAL

888-733-4448

CONTENTS:

INSTALLATION:

1A. Align base (B) to body (A) as shown. From below, rotate in (4)

screws (H) and washers (I) as shown using provided tool (J) until

securely tightened.

1. Setting up Base to Body :

2. Adjusting Height : 3. Setup Configuration :

4. Setting up VESA Magnetic Plate : 5. Attaching Magnetic Holder to Plate :

2A. Loosen the side bolt using provided tool (J)

to raise or lower to height to your preference.

Rotate opposite direction to securely tighten and

set your height.

3A. Identify the top VESA plate, Tilt it down

for a 2-direction setup or keep it up for a

1-direction setup as required.

4A. Identify the (3) VESA

locations. Align magnetic plate

VESA holes (D) with the body

VESA holes (A). Then using the

screw and hex nuts (F, G),screw in

from the front using provided tool

(E) while holding the hex nuts

from behind until securely

tightened. Repeat for all other

VESA locations.

5A. Identify the (3) magnetic holders (C).Align the magnetic holder and attach it to metal

plate. Repeat for all other holders Shown above.

M5 Allen Key

M6 Allen Key

x12

M5 Nut

x12

M5 x 12

M6 x 12

M6 Washer

HIJ

x12

CTA ADD-PARAMULTI Owner's manual

CTA ADD-PARAMULTI Owner's manual

CTA ADD-PARAMULTI Owner's manual

Related papers

Other documents