SCE SCE-72XD2818 Installation Information

Type
Installation Information
Cutler-Hammer Flange Mounted Disconnects and Circuit Breakers
Flange Mounted Operator Handle and Operating Mechanisms, variable depth and cable operated. The D1
Cutout detail is the standard cutout in all Stock SCE enclosures.
*The exception is part numbers with the Letter U at the end (Example: SCE-84XM4018U), this indicates the
Universal Cutout (D7).
Adapter Kits available for use with Universal Cutout, for D2 cutout: SCE-UA400V and for D1 cutout: SCE-UAV.
HANDLE /
OPERATOR
CUTOUT
DETAIL
C361H1 D1
C361H2 D1
C361H3 D1
C361H4 D1
F0S03 D1
F0S04 D1
F0S05 D1
F1S03C D1
FLEX SHAFT D1
FLEX SHAFT CH D1
LHMFS04 D1
SM150 D10
SM250 D9
1.125
0.438
0.438
1.375
8.00
7.125
0.218
D7
5.875
0.531
4.094
0.922
0.312
1.032
0.312
D9
5.875
0.531
0.516
0.484
0.312
1.047
4.094
D10
2.875
1.25
4.688
0.50
0.563
0.281
D1
6.50
5.00
0.94
0.56
0.50
0.328
D2
  • Page 1 1

SCE SCE-72XD2818 Installation Information

Type
Installation Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI