2. SCE
  3. SCE-60XEL4912LP

SCE SCE-60XEL4912LP Installation Information

  • Hello! I've reviewed the datasheet for Cutler-Hammer Flange Mounted Disconnects and Circuit Breakers. This document provides details on various operator handles, operating mechanisms, and cutout details, including standard and universal cutouts. I'm ready to answer any questions you might have about these products.
  • What is the standard cutout detail?
    What does the letter 'U' at the end of a part number indicate?
    Are adapter kits available?
Cutler-Hammer Flange Mounted Disconnects and Circuit Breakers
Flange Mounted Operator Handle and Operating Mechanisms, variable depth and cable operated. The D1
Cutout detail is the standard cutout in all Stock SCE enclosures.
*The exception is part numbers with the Letter U at the end (Example: SCE-84XM4018U), this indicates the
Universal Cutout (D7).
Adapter Kits available for use with Universal Cutout, for D2 cutout: SCE-UA400V and for D1 cutout: SCE-UAV.
HANDLE /
OPERATOR
CUTOUT
DETAIL
C361H1 D1
C361H2 D1
C361H3 D1
C361H4 D1
F0S03 D1
F0S04 D1
F0S05 D1
F1S03C D1
FLEX SHAFT D1
FLEX SHAFT CH D1
LHMFS04 D1
SM150 D10
SM250 D9
1.125
0.438
0.438
1.375
8.00
7.125
0.218
D7
5.875
0.531
4.094
0.922
0.312
1.032
0.312
D9
5.875
0.531
0.516
0.484
0.312
1.047
4.094
D10
2.875
1.25
4.688
0.50
0.563
0.281
D1
6.50
5.00
0.94
0.56
0.50
0.328
D2
/