Log Placement Instructions
Model: AVFL42(N/P)TSC
WARNING: Turn off replace and allow to cool complete-
ly before beginning installation.
Kit Contents:
• Two(2)ceramicberdriftwoodlogs
• Four(4)logsupportpinbrackets
• Eight(8)#8bracketmountingscrews
NOTE —Donothandlelogswithyourbarehands.Always
wear gloves to prevent skin irritation from ceramic bers.
Afterhandlingthelogs,washyourhandswithsoapandwater
toremoveanytracesofbers.
NOTE:Priortoinstallingthelogset,youmustrstinstall
thepinbracketsontheburner.Theairdeectionglassand
reglassshouldonlybeinstalledafterthepinbracketsare
inplace.Theairdeectionglassshouldbeinstalledpriorto
placingandreglassontheburner.Thelogsmustthenbe
placedintheunitafterthereglassandairdeectionglass.If
theoptionallogsareaddedaftertheairdeectionglassand
reglassareinuse,movethereglassawayfromtheareas
in Figure 1andinstallthesupportbrackets,thenarrange
reglassevenlyacrossburneragain.
Figure 1 –
Log Pin Assembly
Figure 2 –
Alternative Log Placement 203060768/21Rev.A
Pin placement
Log #1 (Rear)
Pin placement
Log #2 (Front)
Option 1
Pin placement
Log #2 (Front)
Option 2
AirDeection
Glass