Kentrol 30519 Installation guide

Hello! I've reviewed the installation instructions for the Quadratec Dash Overlay 30519. The document outlines how to carefully install the stainless steel overlay piece by piece, using tape and screws on your vehicle's dashboard. The overlay attaches over the original dash after factory gauges are removed and should be applied with precision as it is not easily removable once applied. Feel free to ask any specific questions you may have.
What should I do before installing the dash overlay?

Can I remove the overlay pieces after applying them?

How should I attach the stainless steel dash overlay?

INSTALLATION INSTRUCTIONS

Part Number 30519 Dash Overlay

Clean the dash with a clean cloth to remove all dust and dirt.

There is no room for error, so please be very careful. Once the parts have been

applied you will NOT easily be able to remove them.

Remove the screws holding the factory dash gauges in place.

Place the Stainless Steel Dash Overlay in place one piece at a time. Carefully peel the

tape backing from the tape. Carefully position the piece to be applied to the dash so that

all the mounting holes will line up. Press the overlay piece in place and fasten using the

Stainless Steel screws provided.

INSTALLATION INSTRUCTIONS

Part Number 30519 Dash Overlay

Clean the dash with a clean cloth to remove all dust and dirt.

There is no room for error, so please be very careful. Once the parts have been applied

you will NOT easily be able to remove them.

Remove the screws holding the factory dash gauges in place.

Place the Stainless Steel Dash Overlay in place one piece at a time. Carefully peel the

tape backing from the tape. Carefully position the piece to be applied to the dash so that all

the mounting holes will line up. Press the overlay piece in place and fasten using the

Stainless Steel screws provided.