MXR M296 User manual

Brand: MXR

Model: M296

Category: Guitar accessories

Type: User manual

MXR M296 Classic 108 Fuzz: Experience vintage fuzz tones with this compact pedal, featuring a silicon BC-108 transistor for a warm and gritty crunch. Use the Volume and Fuzz controls to shape your sound, and activate the Buffer switch to eliminate high-end roll-off when using wah pedals.

MXR M296 Classic 108 Fuzz: Experience vintage fuzz tones with this compact pedal, featuring a silicon BC-108 transistor for a warm and gritty crunch. Use the Volume and Fuzz controls to shape your sound, and activate the Buffer switch to eliminate high-end roll-off when using wah pedals.

Classic 108 Fuzz

Now in an MXR mini housing, the Classic 108 Fuzz

gives you all the same vintage fuzz tones in a much

smaller footprint. Like its larger predecessor, it’s

loaded with the silicon BC-108 transistor for a round

and dirty crunch. This Classic 108 Fuzz also has

the same no-nonsense control interface—just crank

the Volume and Fuzz controls to your liking and

start rifﬁng. Use the Buffer switch on the side to

make the fuzz play nice with wah pedals.

M296

jimdunlop.com/m296

M296 | Classic 108 Fuzz 2

1 OUTPUT knob controls overall effect volume

2 BUFFER switch removes high-end roll off and oscillation

caused by some wah pedals

3 FUZZ knob controls fuzz intensity

4 FOOTSWITCH toggles effect on/bypass

(blue LED indicates on)

1

3

4

External Controls

2

M296 | Classic 108 Fuzz 3

Basic Operation

1 Run a cable from your guitar to the Classic 108 Fuzz’s

INPUT jack and run another cable from its OUTPUT jack

to your ampliﬁer.

2 Start with both knobs at 12 o’clock. Turn the effect on

by depressing the footswitch.

3 Rotate the FUZZ knob clockwise to increase fuzz

intensity or counterclockwise to decrease it.

4 Rotate the VOLUME knob clockwise to increase overall

effect volume or counterclockwise to decrease it.

5 Engage the BUFFER switch to eliminate the oscillation

that sometimes occurs when a wah pedal is used

in front of the Classic 108 Fuzz. You may notice a

brightening of the fuzz tone.

The Classic 108 Fuzz is powered by the Dunlop ECB003

9-volt adapter or an MXR® Brick™ Series power supply

(each sold separately). This pedal cannot be powered

by a battery.

Power

Operation

M296 | Classic 108 Fuzz 4

Speciﬁcations

Input Impedance / Buffer Switch On 800 kΩ

Output Impedance / Buffer Switch Off 10 kΩ

Output Impedance @ 1 KHz, Maximum Volume ~16 K ohm

Output Impedance @ 1 KHz, -6dB Volume ~120 K ohm

Maximum Output Level -4 dBV

Maximum Gain @ 1 KHz, Volume & Fuzz Max 55 dB typ

Bypass True Hardwire

Power Requirements 2.5 ma @ 9VDC

1
2
3
4

MXR M296 User manual

Brand: MXR

Model: M296

Category: Guitar accessories

Type: User manual

MXR M296 Classic 108 Fuzz: Experience vintage fuzz tones with this compact pedal, featuring a silicon BC-108 transistor for a warm and gritty crunch. Use the Volume and Fuzz controls to shape your sound, and activate the Buffer switch to eliminate high-end roll-off when using wah pedals.

Related papers

Other documents