2. HEDD
  3. 20 MK2 Heinz Electro dynamic

HEDD 20 MK2 Heinz Electro dynamic User manual

  • Hello! I've reviewed the user manual for HEDD speakers and subwoofers. This document outlines the connections and optimal settings for integrating TYPE MK2 series speakers and BASS series subwoofers with a DAC or pre-amp. I'm ready to answer your questions about connecting, configuring, and using these devices based on the information provided in this guide.
  • What is the recommended VOL [dB] setting for the speakers?
    How do I connect the subwoofers and satellites?
    What should the LF RANGE be set to when using a subwoofer?
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AESTHROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AESTHROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
ANALOGINPUTS
OUTPUTSTO SATELLITES
VOL.[dB] LINEARISER®CoP
-1
-2 +2
+1
0
60
40 200*
100
120*
80
*FORLFE
EXTEND.
(lessSPL)
NORMAL
+10dB FOR LFE
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
-90-270
0
-180
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SAT.OFFSET [m] X-OVER[HZ] LFRANGE
ANALOG/AES INP.SENS. [dB] PHASE[°]
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISK OF
ELECTRIC SHOCK
DO NOTOPEN
BASS 08
MADE IN GERMANY - www.hedd.audio
SUBWOOFER
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
CAUTION
AES IN LEFT RIGHT
AESTHROUGH LEFT RIGHT
1
3
2
PUSH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory use only
ANALOGINPUTS
OUTPUTSTO SATELLITES
VOL.[dB] LINEARISER®CoP
-1
-2 +2
+1
0
60
40 200*
100
120*
80
*FORLFE
EXTEND.
(lessSPL)
NORMAL
+10dB FOR LFE
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
-90-270
0
-180
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SAT.OFFSET [m] X-OVER[HZ] LFRANGE
ANALOG/AES INP.SENS. [dB] PHASE[°]
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISK OF
ELECTRIC SHOCK
DO NOTOPEN
BASS 08
MADE IN GERMANY - www.hedd.audio
SUBWOOFER
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
CAUTION
AES IN LEFT RIGHT
AESTHROUGH LEFT RIGHT
1
3
2
PUSH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory use only
ANALOGOUT
RIGHT LEFT
DACor PRE-AMP
PUSH
PUSH
PUSH
LEFT SPEAKER
RIGHT SPEAKER
PUSH
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AESTHROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AESTHROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
ANALOGOUT
RIGHT LEFT
DACor PRE-AMP
PUSH
PUSH
RIGHT SPEAKER LEFT SPEAKER
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AES THROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
VOL.[dB] LINEARISER®CoP
-2
-4 +4
+2
0
LOW
-2
-4 +4
+2
0
HIGH
EXTEND.
(lessSPL)
NORMAL
forSUB (80 Hz)
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
SMALLLARGE
OFF
MED.
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SHELVINGFILTER [dB] LFRANGE
ANALOG/AES INP.SENS. [dB] DESKFILTER
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISKOF
ELECTRICSHOCK
DONOT OPEN
MADE IN GERMANY - www.hedd.audio
TYPE 07 MK2
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
I
O
ANALOGIN AES IN AES THROUGH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory
use only
ANALOGINPUTS
OUTPUTSTO SATELLITES
VOL.[dB] LINEARISER®CoP
-1
-2 +2
+1
0
60
40 200*
100
120*
80
*FORLFE
EXTEND.
(lessSPL)
NORMAL
+10dB FOR LFE
MONO LEFT
ANALOG
RIGHT
-4 +4
0
-10
-90-270
0
-180
-6
-12 +12
+6
0 ON
OFF
(*)
Ported
Closed
SAT.OFFSET [m] X-OVER[HZ] LF RANGE
ANALOG/AES INP.SENS. [dB] PHASE[°]
ALL "0" and "↑" POSITION = FACTORYSETTING
!
RISK OF
ELECTRIC SHOCK
DO NOTOPEN
BASS 08
MADE IN GERMANY - www.hedd.audio
SUBWOOFER
Thisloudspeaker is capable of delivering sound
pressurelevels in escess of 85 dB(A), which may
causepermanent hearing damage.
Donot expose this appliance to moisture or rain.
Referto qualied personnel for servicing.
CAUTION
CAUTION
I
O
AES IN LEFT RIGHT
AESTHROUGH LEFT RIGHT
1
3
2
PUSH
1
3
2
PUSH
1
3
2
PUSH
85V- 264V 50Hz/60Hz
factory use only
PUSH
PUSH
PUSH
PUSH
ANALOGOUT
RIGHT LEFT
DACor PRE-AMP
RIGHT SPEAKER LEFT SPEAKER
How to connect two HEDD TYPE MK2 monitors with a
DAC or pre-amp
1. Connect the right analog XLR signal into the ANALOG IN of the
right speaker. Do the same for the left signal path.
2. Set the ANALOG/AES rotary switch on both speakers to
ANALOG.
3. We recommend setting VOL. [dB] on both speakers to +12 for
the highest possible headroom. Reduce INP. SENS. [dB] if
necessary.
How to connect the BASS subwoofer and two TYPE MK2
satellites with a DAC or pre-amp
1. Connect the both left and right analog XLR signals into the
ANALOG INPUTS of the subwoofer.
2. Set the ANALOG/AES rotary switch on the BASS to ANALOG.
3. Connect the satellites via balanced analog XLR connections and
make sure the ANALOG/AES rotary switch is set to ANALOG
on both satellites.
4. Change the LF RANGE on both speakers to select the FOR SUB
(80 Hz) setting.
5. Adjust the VOL. [dB] settings on the satellites according to the
table below for a neutral setting. Individual adjustments might
be necessary depending on room behaviour and placement of
the speakers.
6. We recommend setting VOL. [dB] on the BASS to +12 for the
highest possible headroom. Reduce INP. SENS. [dB] if
necessary.
How to connect two HEDD BASS subwoofers and two
HEDD TYPE MK2 satellites with a DAC or pre-amp
1. Connect the right analog XLR signal into the right ANALOG
INPUT of the rst subwoofer. Do the same for the left analog
XLR signal and connect it into the left ANALOG INPUT of the
second subwoofer.
2. Set the ANALOG/AES rotary switch on both BASS to ANALOG.
3. Connect the right satellite via balanced analog XLR connection
and make sure the ANALOG/AES rotary switch is set to
ANALOG. Do the same for the second BASS with the left signal
path and connect it via analog XLR into the left speaker.
4. Change the LF RANGE on both speakers to select the FOR SUB
(80 Hz) setting.
5. Adjust the VOL. [dB] settings on the satellites according to the
table below for a neutral setting. Individual adjustments might
be necessary depending on room behaviour and placement of
the speakers.
6. We recommend setting VOL. [dB] on both subwoofers to +12
for the highest possible headroom. Reduce INP. SENS. [dB] if
necessary.
Heinz Electrodynamic Designs
/