Techni Mobili RTA-7337 Assembly Instructions Manual

Brand: Techni Mobili

Model: RTA-7337

Type: Assembly Instructions Manual

MODEL RTA-7337

MODEL RTA - 7337

Thanks for purchasing one of our products.

Please read carefully the assembly instructions before the installation.

Please save this manual for future reference.

ASSEMBLY INSTRUCTIONS

This product comes in 2 boxes.

RTA-7337

DIMENSIONS

MAXIMUM WEIGHT CAPACITIES

DO NOT exceed this limit

Please use care and good judgement

when placing objects on wood surface

Product Size: 49"W x 25"D x 47 1/2"H

Product Net Weight:61.73 lbs

RTA-7337 P.3

1 2 3

456

7

X6

X3

1

1

4

8

3

5

6

7

X4

8

RTA-7337 P.4

Long Structure

X2

Support Tube Long Tube

Metal Panel Short Structure Back Support Tube

Glass Table Top Connect Tube

X2

1

1

2X6

X12

C

A

6X40MM

A

B

C

4

PART QTY. ITEM PART QTY. ITEM

D

1

RTA-7337 P.5

6X40MM

22

4

1

6

E

6X55 MM

6X35MM

6X12MM

6X30MM

12

8X4

X8

C

A

6X40MM

1

1

Use screws A to assemble

the Support Tubes (2)

to the Long Structures (1).

Use screws A to assemble

the Connect Tubes (8) to

the Long Structures (1).

4

1

1

X3

3

3

1

1

X4

C

B

6X55MM

3 4

Place the Metal

Panels (4) over

the support

Tubes (2) as

shown.

Use screws B to assemble

the Long Tubes (3) to the

Long Structures (1).

TO ALLOW FLEXIBILITY AND ENSURE PROPER ALIGNMENT OF ALL PARTS, SCREW

LOOSELY AND DO NOT TIGHTEN ANY OF THE SCREWS UNTIL THE END OF STEP No.7!

RTA-7337 P.6

3

5

3

X2

C

A

6X40MM

5Use screws A to assemble the Long Tubes (3) to

the Short Structure (5).

OR

There are two assemble options while you assemble the

Back Support Tubes (6) in step 6.

RTA-7337 P.7

51

X4

C

C

6X35MM

X1

C

D

6X12MM

6

Use screws C to assemble the Back Support Tubes (6)

to the Long Structure (1) and Short Structure (5).

Use screw D to fix the Back Support Tubes (6).

3

3

7

X6

C

E

6X30MM

7

Use screws E to assemble the Glass Table Top (7)

to the Long Tubes (3).

Tighten all the screws and enjoy your unit!

English

- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT OR EXTREME

ENVIRONMENTAL CONDITIONS. ANY DAMAGE RESULTING FROM SUCH

EXPOSURE IS NOT COVERED BY THE PRODUCT’S WARRANTY.

- THE PREFERABLE METHOD TO CLEAN THE SURFACES IS TO WIPE THEM

USING A SOFT CLOTH DAMPENED WITH A SOLUTION SOAP AND WATER,

THEN DRY WITH A CLEAN TOWEL.

- DO NOT SPRAY SOLVENTS OR CLEANING AGENTS DIRECTLY OVER THE

SURFACES, STRUCTURAL TUBES OR METAL PARTS.

- DO NOT LEAN, SEAT OR STAND OVER THE UNIT.

- DO NOT ALLOW CHILDREN TO PLAY OVER/UNDER THE UNIT, NOR ALLOW

THEM TO REACH INSIDE ANY COMPARTMENTS WITHOUT THE SUPERVISION

OF AN ADULT.

- BEFORE MOVING OR TRANSPORTING THE UNIT, MAKE SURE THAT:

ALL HEAVY OBJECTS OR THAT MIGHT FELL OFF ARE REMOVED FROM

THE UNIT.

IF THE UNIT ARE ON CASTERS (WHEELS), MAKE SURE THAT ALL ARE

UNLOCKED.

THE UNIT MUST BE HANDLED BY AT LEAST 2 PERSONS.

WHEN LIFTING THE UNIT, USE BOTH OF YOUR HANDS, AND BEND YOUR

KNEES. REMEMBER TO ALWAYS LIFT WITH YOUR LEGS, NOT YOUR BACK.

- IN CASE OF DAMAGE TO ANY PARTS, NOTIFY THE VENDOR AS SOON AS

POSSIBLE.

- IN CASE OF GLASS BREAKAGE (IF THE UNIT HAS A GLASS TABLE TOP OR

PARTS MADE OF GLASS) DO NOT HANDLE THE BROKEN GLASS WITH YOUR

BEAR HANDS, AND CONTACT THE VENDOR IMMEDIATELY. DO NOT ALLOW

CHILDREN NEAR THE BROKEN GLASS.

CARE AND MAINTENANCE

1
2
3
4
5
6
7
8

Techni Mobili RTA-7337 Assembly Instructions Manual

Brand: Techni Mobili

Model: RTA-7337

Type: Assembly Instructions Manual

Related papers

Other documents