TBK vision TBK-MD5641EIR User manual

User Manual

TBK-MD5641EIR

TBK-MD5841EIR/

TBK-BUL4841EIR

Cameras 4 in 1

TBK Camera 4 in 1

1

www.tbkvision.com

Contents

1 Notes .........................................................................2

2 Product Introduction ....................................................3

2.1 Production Instruction .........................................3

2.2 Product Feature ..................................................4

3 Product Structure ........................................................4

4 Technical Parameters ....................................................6

5 Product Installation ......................................................9

5.1 Note .................................................................9

5.2 Installation Tools and Information ..........................9

5.3 Installation Method ........................................... 10

5.4 Connection ...................................................... 11

6 Menu Instruction ....................................................... 14

6.1 Camera Menu Setting ........................................ 15

Appendix: FAQ ................................................................... 21

TBK Camera 4 in 1

2

www.tbkvision.com

1 Notes

Read this manual carefully before use.

1)To reduce the risk of electric shock, do not open the machine and

maintain by yourself, please consult a professional service person.

2)To prevent fire or shock hazard, use the power after safety

certification, the input voltage, current, voltage polarity and

operating temperature must meet the requirements of this camera.

3)Please note the operating temperature and environmental

requirements of the camera, avoid too low or too high temperature.

General operating temperature range of -10℃～+50℃(Fahrenheit

temperature is 14℉～122℉). Avoid flooding and rain, minimize dust

and moisture erosion, otherwise camera would be damaged.

4)Cameras in use should avoid direct sunlight, glare, otherwise the

sensor will be damaged.

5)Do not touch the sensor surface, if any foreign objects exits, a

cotton swab or lens paper can be used to wipe, if it is difficult to

remove, a neutral detergent diluted with water would be useful. Do

not use corrosive solution.

6)In order to make the camera work smoothly and obtain a

satisfactory image, the power cord and video connection can not be

TBK Camera 4 in 1

3

www.tbkvision.com

too long, otherwise the increase of line loss will lead to the

inadequate magnitude of the operating voltage of the camera or

video signal Inadequate.

7)In order to prevent the camera from falling, please do not place

the camera on an unstable bracket, base or other unstable objects.

Otherwise it will lead to injury, at the same time, the camera will be

damaged.

8)The camera cannot be placed near the radiator or heating resistor.

2 Product Introduction

2.1 Production Instruction

This manual is applicable to following models:

1080p resolution camera: TBK-MD5641EIR, TBK-MD5841EIR,

TBK-BUL4841EIR.

This series of cameras are adopted CMOS image sensor with high

performance, which provides mega pixel resolution and supports HD

video. Moreover, it supports monitoring signals coaxial transmission.

Transmission distance can reach more than 300M based on 75-3

coaxial cable. The series can support both TVI/CVBS 960H output as

well as realize high speed, long distance and real time video

transmission.

TBK Camera 4 in 1

4

www.tbkvision.com

2.2 Product Feature

● Coaxial cable adopted，BNC connector as cable standard. Dual

output: HD signal switcheable to TVI/CV/AHD and CVBS signal.

● Auto Day/Night（ICR）

● Auto Defog

● WDR, 2D/3D NR

● Motion Detection, Privacy Mask

● Auto Iris（Specific models）

● Back-end support optical zoom (motorized zoom lens models)

● Voltage Input: DC 12V

3 Product Structure

The followings are the dimensions of some products. No

further notice for the upgraded version.

Photo 3-1 TBK-BUL4841EIR

TBK Camera 4 in 1

5

www.tbkvision.com

Photo 3-2 TBK-MD5841EIR

Photo 3-3 TBK-MD5641EIR

TBK Camera 4 in 1

6

www.tbkvision.com

4 Technical Parameters

Model

TBK-MD5641EIR

TBK-MD5841EIR

Image Sensor

1 /2.7” 2.1MP SONY Exmor CMOS

Image

Effective Pixels

1928(H)×1088(V)

Resolution

Digital:1920x1080p 25ips

Analog:700LTV

S/N Ratio

≥41dB (AGC Off)

Min. Illumination

Color: 0.1Lux@F2.0 AGCE ON

B / N:0.001Lux@F2.0 AGC ON

(0Lux IR On)

Scanning System

Progressive

Video Output

Digital: 1080p HD-TVI or HD-CVI or AHD

Analog:1Vp-p75Ω/BNC

Function

Day & Night

EXTERN,COLOR, B&W, AUTO

White Balance

Auto

Defog

OFF/ON

DNR

2D+3D NR

ACE

OFF/LOW/MIDDLE/HIGH

Privacy Mask

ON/OFF (16 Areas)

Motion Detection

ON/OFF (4 Areas)

TBK Camera 4 in 1

7

www.tbkvision.com

Lens

3.6mm

2.8-12mm Auto Focus

IR LED

3pcs IR Array LEDS

IR Range

40m

General specification

Input Voltage

DC12V±10%

Current

300mA

410mA

Power

Consumption

<4.5W

<6W

Weight

240g

630g

IP Rating

IP66

Operation Temp.

-10℃~+50℃(14℉~122℉)

Operation

humidity

＜85%RH (Non-condensation)

Model

TBK-BUL4841EIR

Image Sensor

1 /2.7” 2.1MP SONY Exmor CMOS

Image

Effective Pixels

1928(H)×1088(V)

Resolution

Digital:1920x1080p 25ips

Analog:700TLV

S/N Ratio

≥41dB (AGC Off)

Min. Illumination

Color:0.1Lux@F2.0 AGC ON

B / N:0.001Lux@F2.0 AGC ON

(0Lux IR On)

Scanning System

Progressive

Video Output

Digital: 1080P HD-TVI or HD-CVI or AHD

Analógica:1Vp-p75Ω/BNC

Function

TBK Camera 4 in 1

8

www.tbkvision.com

Day & Night

EXTERN,COLOR, B&W, AUTO

White Balance

Auto

Defog

OFF/ON

DNR

2D+3D NR

ACE

OFF/LOW/MIDDLE/HIGH

Privacy Mask

ON/OFF (16 Areas)

Motion Detection

ON/OFF (4 Areas)

ZOOM IN

1X-8X

Lens

2.8-12mm Auto Focus

IR LED

24pcs IR LEDS

IR Range

35m

General specification

Input Voltage

DC12V±10%

Current

370mA ±10%

Power

Consumption

<4.5W

Weight

630g

IP Rating

IP66

Operation Temp.

-10℃~+60℃(14℉~122℉)

Operation

humidity

＜90%RH (Non-condensation)

TBK Camera 4 in 1

9

www.tbkvision.com

5 Product Installation

5.1 Note

1) Make sure the unit is powered off before installation.

2) Check power supply voltage consistent with the electric

voltage to prevent voltage unworthy, resulting in damage to

the device.

3) Do not use in the environment beyond the boundaries of the

temperature, and maintain good ventilation to prevent the rain

in order to reduce the risk of fire or electric shock.

4) The installation and maintenance of this product should be

professional, please do not in any way to remove or modify the

equipment; can only use the required accessories of

manufacturers. Problems caused by unauthorized repair are at

your own risk.

5.2 Installation Tools and Information

Prepare the required engineering data and instructions. Before

installation please prepare the following tools and

instrumentation: A straight or a Phillips-head screwdriver,

multi-meter, scissors, needle nose pliers, tape measure, pencil

and so on.

TBK Camera 4 in 1

10

www.tbkvision.com

5.3 Installation Method

1. Check the equipment whether it is damaged.

2. Mounting bracket or base.

① If the cement wall, install the expansion screws (expansion

screw holes need stand or base hole), and then mount

bracket or base.

② If the wooden wall, use self-tapping screws to mount.

3. Mounting the camera

a. Dome Camera

Adjust the lens position and make it aim at the monitoring

points and present a clear picture, manually fix lens location

and adjust the hemisphere cover. Re-examine the screen

whether the character meets the requirement. Tighten the

hemisphere cover.

b. Box Camera

Adjust the body so that the lens aims at the monitoring points

and presents a clear picture. Tighten the screws, to ensure that

it does not move.

Installation method above is for reference only, the specific

installation, please be kind.

Note: The wall needs to bear at least 3X weight of bracket (base)

and camera.

TBK Camera 4 in 1

11

www.tbkvision.com

5.4 Connection

Connection as show in the figure below

5.4.1 Camera connectors

BNC Green connector: switchable TVI/CVI/AHD HD video signal.

BNC Yellow connector: PAL Analogue video signal

RCA Red connector: power supply 12 DCV

TBK Camera 4 in 1

12

www.tbkvision.com

5.4.2 How to select HD video output

Analogue video signal and HD video signal are simultaneous.

HD signal (green connector) is switchable between three HD

technologies: TVI or CVI or AHD.

In order to select each HD signal please use the joystick attached at

the camera wire and follow this two steps:

Image: Camera wire attached joystick

Firstly:, hold the central botton (menu botton) during 5 sec.

Secondly:

Move the joystick to the left for selecting TVI.

Move the joystick to the right for selecting AHD.

Move the joystick up (UP) for selecting CVI.

NOTES:

*Each time an HD technology is selected the type of HD signal is

displayed on the monitor for a few seconds:TVI-PAL or CVI-PAL or

AHD-PAL.

** If we do not know which technology we have selected we can use

the analogue video output (yellow connector), checking the menu

first line:

TBK Camera 4 in 1

13

www.tbkvision.com

Menu with TVI signal selection:

Menu with CVI signal selection:

Menu with AHD signal selection:

TBK Camera 4 in 1

14

www.tbkvision.com

6 Menu Instruction

To enter menu from analogue video output use joystick atacched on

the camera wire.Press "MENU" button to enter the main MENU,

press "UP" and "DOWN" arows in order to select menus, press

"LEFT" and "RIGHT" choice or set the corresponding function, to

enter submenu please press "MENU" again. If you want to reset,

please and press “RESET” menu option.

To enter menu from HD video output use camera wire attached

joystick or PTZ control menu from a TVI DVR.

Guidance image for PTZ Control menu from a TVI DVR,

use Iris+ as Enter.

TBK Camera 4 in 1

15

www.tbkvision.com

6.1 Camera Menu Setting

MAIN MENU

LENS, select between iris control (ELC, ALC)

ELC, electronic iris control. (NORMAL, DEBLUR)

ALC, automatic iris control . INDOOR / OUTDOOR /DEBLUR

*DEBLUR improve blur pictures caused by quick

mouvements.

EXPOSURE

BRIGHTNESS- range 0~20, by default 10

SHUTTER- Options AUTO /MANUAL/FLICKER), options in MANUAL

mode are: 1/25, 1/50, 1/100, 1/240,1/500, 1/1000, 1/2000,

1/4000,1/8000, 1/16000,1/30000/1/60000

SENS-UP - OFF, x2, x4, x8, x16, x32

AGC, automatic gain control, range 0~20

TBK Camera 4 in 1

16

www.tbkvision.com

WHITE BAL, alows to adjust white balance.

Options: AUTO, AUTO Ext, PRESET, MANUAL.

MANUAL (KELVIN, R-GAIN, B-GAIN)

KELVIN set color temperature (MIDDLE,HIGH, LOW)

R-GAIN to set red color gain. Range 0~20

R-BLUE to set blue color gain. Range 0~20

BACKLIGHT, options OFF, BLC, HLC, WDR.

HLC, detects strong light spots such as car headlights and

flashlights in the dark (ALL DAY, NIGHT ONLY, LEVEL). LEVEL,

range 0~20.

BLC, allows to set one central area to avoit back light

compensation. Available settings:

H-POS: 0~20

V-POS: 0~20

H-SIZE: 0~20

V-SIZE: 0~20

By default it is an square area at the middle of the screen.

WDR: Range LOW, MIDDLE, HIGH.

DNR, to set digital noise level DNR 2D+3D. Options: (OFF, LOW,

MIDDLE, HIGH).

TBK Camera 4 in 1

17

www.tbkvision.com

DAY&NIGHT

Menú MODE: select between working mode (AUTO, COLOR, B&W,

EXTERN)

IMAGE

SHARPNESS, range 0~10

FREEZE, allows freezing image (OFF/ON)

FLIP, allows the image to turn up and to turn downn (OFF, H-INV,

V-INV, HV-INV).

ACE, contrast adaptative settings. (LOW, MIDLE, HIGH, OFF)

GAMMA, range (0.45, 0.5, 0.55, 0.6, 0.65)

DEFOG, option anti fog (OFF, ON)

ON: allows to set level (MIDDLE, HIGH, LOW)

TBK Camera 4 in 1

18

www.tbkvision.com

SPECIAL

SPECIAL-SYSTEM

OUTPUT MODE, shows unit resolution:1080p.

FRAME RATE, shows 25FPS( for PAL system) or 30FPS (for

NTSC system).

CVBS, analogue video output estándar (PAL/NTSC). By

default PAL.

BLACK LEVEL, black color level. (FULL, COMP, USER)

VERSION, shows camera firmware version.

TBK Camera 4 in 1

19

www.tbkvision.com

SPECIAL-PRIVACY menu for setting privacy masks, 16 areas

avalilabe

ZONE NUM, select the mask to set (0~15)

ZONE DISP, activate /desactivate the mask (ON/OFF)

H-POS, V-POS, to set mask posistion on screen

H-SIZE, V-SIZE, to set size mask.

Y-LEVEL, CR-LEVEL, CB-LEVEL, to set mask color.

SPECIAL-MOTION

Page is loading ...

TBK vision TBK-MD5641EIR User manual

TBK vision TBK-MD5641EIR User manual

Related papers

Other documents