2. Displays2go
  3. TTCLEASEL

Displays2go TTCLEASEL Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Displays2go TTCLEASEL Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Components & Hardware:
Instructions:
1. Attach the Ledge piece to the Left and Right Leg pieces using the Screw Posts (A)
Washers (B) and the 5/8” Screws (C). See Fig. 1 for visual instructions. Tighten with a
phillips screw driver.
2. Attach the Left, Center, and Right Legs using the 1-3/4” Screw (D) and Washers (B).
See Fig. 2 for visual instructions. Tighten with a phillips screw driver.
3. Enjoy your table top easel!
B) Washer [x5]
C) 5/8“ Screw [x2]A) Screw post [x2]
D) 1-3/4“ Screw [x1]
Ledge
Right Leg
Left Leg
Center Leg
DB B B
TTCLEASEL - Acrylic Table Top Easel
A
A
B
B
C
C
Fig. 1
Fig. 2
/