FURNITUREBOX Lira Extending Table Assembly Instruction Manual

  • Hello! I've reviewed the LIRA Extending Table assembly guide and I'm ready to assist you. This guide covers the steps for assembling the table, including attaching the legs and using the extending mechanism. Feel free to ask me any questions about the process or specific aspects of the assembly or features.
  • Can I use power tools?
    How many people needed for assembly?
    What is the maximum weight capacity?
    How do I extend the table?
LIRA
EXTENDING TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/lira
SCAN ME
Check you have all the components and
tools listed.
Remove all fttings from the plastic bags
and separate them into their groups.
We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
Make sure you have enough space to
layout the parts before starting.
Assemble the item as close to its nal
position (in the same room) as possible.
Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
From time to time check
that there are no loose
screws on this unit
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE
www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD
Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft surface to avoid
bumps or scratches.
First connect the table legs together
using 1 x washer [B] followed by 1 x
screw [C] and tighten with Allen key [G]
Do not fully tighten yet as you will
need some manoeuvrability.
STEP 2
Place the table top on the oor with
the extending mechanism facing up.
Align table legs with holes in table top.
Attach the table legs to the table top
using washer [B] followed by screw [A]
in each table leg hole. 2 holes per leg.
Once the legs are secured, you can
go ahead and tighten all the screws,
including at the connecting point
between the legs with Allen key [G].
www.furniturebox.co.uk
STEP 3
ATTENTION: Carefully, and with help, turn
your completed table over so it’s now the
correct way up. Ensure stability. To extend,
release catch on either side of table.
STEP 4
Your table is now ready to use.
FULL ASSEMBLY INSTRUCTIONS
www.furniturebox.co.uk
The cushions (foam inserts and
covers) are not covered by the guarantee.
/