About MKC-307 Operation Manual
x The copyrights of this document belong to Ikegami Tsushinki Co., Ltd.
x The whole or part of this product and manual may not be reproduced, copied, reprinted, or modified
without our prior permission.
x The specifications of this product and the contents described in this manual are subject to change
without notice.
x We are not responsible for any consequences caused by the following operations based on this
manual.
x We are not responsible for the indemnification for any incidental damages, such as those caused by
missed opportunities for recording, playing, or saving images due to a fault, malfunction, or deficiency
of this product.
x Operation screens are subject to change without notice.
x Please contact our local office or sales representative for more information on this product or manual.
x The image enhancement function has been enabled with Apical Technology.
MKC-307 0710 VOL1(U)(E)
1
Safety Guidelines
For safe use of this product,
Please read the “safety guidelines” and the operation
manual fully for proper use of the product before use.
After reading the manual, please store it with caution and
refer to it when necessary.
About symbols
The “safety guidelines” and product labeling include
various symbols so that the product is used safely and
properly allowing dangers to yourself and other users as
well as damages to the properties to be prevented. These
symbols and their meanings are provided as follows.
Please use this product only after fully understanding the
cautions and instructions.
Please note that there may be precautions that do not
apply to this product.
Warning: Indicates the risk to the user of death or serious
injury.
Caution: Indicates the risk to the user of injury and property
damage.
(Note) Symbol indicates items for which “caution is required.”
Examples
symbol indicates prohibited actions.
Specific prohibited caution is depicted inside or near
the symbol (for the symbol on the left, caution of
disassembly is shown).
٨symbol indicates forcing or instruction of
actions. Specific caution is depicted inside the
symbol (for the symbol on the left, disconnect the
device from the mains supply).
Warning
Operation
Do not place containers holding liquid or small metal
objects on this product!
If they spill and fall inside the product, it may cause fire or
electric shock.
Do not use power supply voltage other than the
specified voltage!
It may cause fire or an electric shock.
Do not insert or drop metal objects or flammable foreign
objects into the openings of this product!
It may cause fire or an electric shock.
Do not modify this product!
It may cause fire or an electric shock.
Installation
Do not place the product on an unstable surface!
It may fall or get damaged and cause injury.
Do not connect devices other than the specified devices!
It may cause fire or an electric shock.
Request a specialist to secure this product!
This product must be secured properly according to the
specified method. Neglecting this warning may lead to
falling or getting damaged which may cause fire, an
electric shock or injury. Please be sure to request a
specialist especially when securing the product to the
wall or ceiling.
In case of failures
Turn off the power switch and disconnect the device
from the mains supply immediately if you notice smoke,
abnormal odor or noise!
Continuing to use the product may cause fire or electric
shock. Check that the smoke stops being produced and
then contact the dealer or the sales representative.
Turn off the power switch and disconnect the device
from the mains supply if water, foreign objects, etc., fall
into the product!
Continuing to use the product may cause fire or electric
shock. Please contact the dealer or a sales
representative.
Turn off the power switch and disconnect the device
from the mains supply if the product is dropped or the
case is damaged!
Continuing to use the product may cause fire or electric
shock. Please contact the dealer or a sales
representative.
Turn off the power switch and disconnect the device
from the mains supply if this product has a failure!
Continuing to use the product may cause fire or electric
shock. Please contact the dealer or a sales
representative.
Do not use damaged (exposed conductor, broken wire,
etc.) power supply cable!
Continuing to use the product may cause fire or electric
shock. Please contact the dealer or a sales
representative.
MKC-307 0710 VOL1(U)(E)
2
Caution
Operation
Do not place heavy objects on this product!
It may cause the loss of stability leading to damage or a
fall causing injury
Do not climb over or sit on this product or the carrying
case!
It may become damaged or break and cause injury.
Be sure to turn off the power switch and disconnect
the device from the mains supply and the cables
connected to other devices when moving the product!
Neglecting this caution may cause cable damage and lead
to fire or an electric shock.
Be sure to disconnect the device from the mains
supply for safety when the product is not being used for
a long period!
Neglecting this caution may cause fire.
Installation
Do not block the vent holes for this product!
Blocking the vent holes may cause heat to
accumulate internally and may cause fire. Please do
not use the product in the following fashion:
• Placing the product face up, on the side or upside
down.
• Pushing the product into a narrow space with bad
ventilation.
• Placing the product on carpet, etc.
• Covering the product with a table cloth, etc.
For proper use of the product
Operation
•Prevent water from entering this product or cables when
using the product is near water such as in a bathroom or
by a swimming pool.
It may cause electric shock. Caution is required for use
under rainy or snowy weather conditions, or near bodies of
water
•Use this product by considering the environmental
conditions if you hear thunder. If necessary, stop using the
product temporarily and do not touch the product.
It may cause electric shock.
•Do not connect devices by exceeding the power (W) that
can be supplied from the AC outlet.
Please refer to the power value indicated near the AC outlet
or in the instruction manual or operation manual.
•Avoid bending(twisting or pulling) the power supply cable
and connection cables by with force.
It may break the coating on the cables and cause electric
shock.
Installation
•Avoid installing the product in spaces with high levels of
humidity or dust or where greasy fumes or steam may
come into contact.
It may lead to an electric shock. Do not place the product
near cooking tables or humidifiers.
•Carry this product using two or more people if the product
is heavy (approx. 10kg or heavier).
If one person carries it, it may get damaged or be dropped and
cause injury to the back or hands.
•Prevent damage by unexpected earthquakes or impacts.
This product may get damaged and cause injury. Provide
measures to prevent damage for safety reasons.
Maintenance
For safety reasons, turn off the power switch and disconnect the
device from the mains supply before maintaining the product.
Neglecting this caution may cause electric shock.
To maintain stable performance for a long period of time, we
recommend “regular inspection.” Please consult your sales
representative for information on regular inspection.
There are high voltage parts inside. This product needs to be
inspected, serviced and repaired by persons with knowledge of
such products. Neglecting this caution may cause electric shock.
The MKC-307 is authorized UL60601 Class I .
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communication. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Please classify by the material, and dispose of them
according to the law and the ordinance etc. of the
country and the local government when you dispose of
the main body and materials for packing.
MKC-307 0710 VOL1(U)(E)
3
Contents
1. Part names and functions.......................................................................................................... 4
CAMERA HEAD ....................................................................................................................4
CCU Front ............................................................................................................................. 6
CCU Rear............................................................................................................................ 11
2. Operation................................................................................................................................. 15
Connecting .......................................................................................................................... 15
Starting up the power ..........................................................................................................16
Setting up auto white balance............................................................................................. 17
3. Menu Operation....................................................................................................................... 18
Operation Procedure........................................................................................................... 18
Video Adjust ........................................................................................................................ 19
AE Mode.............................................................................................................................. 19
DTL Set ............................................................................................................................... 20
Field/Frame ......................................................................................................................... 21
Auto Adjust .......................................................................................................................... 22
Scene File ........................................................................................................................... 22
Foot Switch Mode ...............................................................................................................23
Title...................................................................................................................................... 25
JPEG Parameter .................................................................................................................26
Sound Level ........................................................................................................................ 26
Date/Time Adjust ................................................................................................................. 27
Inverse Mode....................................................................................................................... 27
Image Enhancement ........................................................................................................... 28
Overlay ................................................................................................................................ 28
Trigger ................................................................................................................................. 29
Miscellaneous...................................................................................................................... 29
4. Specifications .......................................................................................................................... 30
Rating .................................................................................................................................. 30
Performance........................................................................................................................ 31
Functions............................................................................................................................. 31
Optional functions ............................................................................................................... 31
5. Appearance ............................................................................................................................. 32
Camera Head...................................................................................................................... 32
CCU..................................................................................................................................... 32
MKC-307 0710 VOL1(U)(E)
4
1. Part names and functions
CAMERA HEAD
Ԙ 1/2”C Mount
This is the mount for docking the product to a lens or microscope adapter.
ԙ CAMERA Connector
Connects to the CCU CAMERA connector through the CAMERA cable.
Ԛ FOCUS Connector
Connects to the focus cable for optional microscope adapter CXA-301R.
The connector functions are described on the next page.
ԛ IRIS Connector
Connects to the IRIS cable for a special microscope adapter or 1/2-inch C mount lens.
The connector functions are described on the next page.
Front Rear
Ԙ1/2” C Mount ԙCAMERA Connecto
r
ԚFOCUS Connector
ԛIRIS Connector
ԜFilter Mounting Screws
MKC-307 0710 VOL1(U)(E)
5
Ԝ Filter Mounting Screws
By mounting another optional filter instead of the infrared cut filter when infrared cut
filter is not used (fluorescent agent (ICG, etc.) is used to observe fluorescence image),
clearer images can be obtained.
* Shooting images without the infrared cut filter or the optional filter may result in an
incomplete focus. It may also result in unexpected phenomena due to incidental
light.
* Removing them unnecessarily may lead to the loss of screws, infrared cut filter or
the optional filter. It may also cause damage to the optical filter during attachment.
Please notify our sales representative if you wish to remove the infrared cut filter.
FOCUS Connector
(HR10A-7R-4P)
IRIS Connector
(HR10A-7R-4S)
1 FOCUS 1 +12V
2 N.C 2 GND
3 GND 3 IRIS
4 N.C 4 N.C
MKC-307 0710 VOL1(U)(E)
6
CCU Front
Ԙ Power Switch
This is the switch to turn ON/OFF the power supply to the MKC-307. When it is ON, the
Ikegami logo lights up in blue.
The product is turned ON by pressing the top of the switch and OFF by pressing the
bottom of it.
When the product is turned ON, the image that was displayed when the power was
lastly turned OFF is output. However, the still screen status is not maintained.
ԙ IRIS Mode Switch
This is the switch to set up the automatic/fixed/manual option for the iris. Whether the
aperture for auto iris lens or microscope adapter capable of iris control is adjusted
automatically or manually is selected. It is normally used on its automatic setting.
When it is set to fixed, the automatic/manual iris value at the time is fixed. It is used to
shoot dark (bright) objects in a bright (dark) environment or when the user does not
wish rapid iris changes.
㾄Menu Button
㾁Outline Enhancement Button
㾅Select Button
㽲Power Switch
㽳IRIS Mode Switch
㽴Brightness Adjustment Control Knob
㽵Image Level Indicator
㽶White Balance Button
㽷Color Bar Button
㽸Slow Shutter Button
㽹Still Screen Button
㽺Still Image Mix Button
㽻Arrow Buttons
㽼USB Connector
㾀Gain Button
㽿Shutter Button
㽾Blue Correction Control Knob
㽽Red Correction Control Knob
㾂Function Buttons
㾃Image Enhancement Button
MKC-307 0710 VOL1(U)(E)
7
Ԛ Brightness Adjustment Control Knob
This is the control knob used to adjust the brightness.
It functions as a fine adjustment when the electronic shutter and automatic speed
settings are enabled.
When the microscope adapter and the lens for auto iris mode are used, it functions as a
fine adjustment only when ԙ IRIS mode switch is set to automatic.
It can also adjust the iris from closed to open under the manual setting.
ԛ Image Level Indicator
Indicates the image output level.
The image level indicator LED lights up red when the image output signal level has
exceeded 100%.
Ԝ White Balance Button
This button executes automatic white balancing. It is used when the camera has not
been used for a while, when the color balance is unsatisfactory, or when the light source
has changed.
It is to be set by shooting a white subject and changing the brightness adjustment level
to the setting instantly before the image level indicator LED lights up red. When the
white balance button is pressed, “Auto White Balance” is displayed on the monitor
screen and white balance is executed. “= OK =” will be displayed on the screen several
seconds later and auto white balance will be completed.
If an auto iris lens or microscope adapter capable of iris control is used, the iris will be in
the optimal condition automatically.
ԝ Color Bar Button
Outputs the built-in color bar signal for the camera to output the image. The brightness,
contrast and so forth on the color monitor can be adjusted using this color bar signal.
Ԟ Slow Shutter Button
When the subject is rather dark, the shutter speed can be properly adjusted and the
subject can be shot with an ideal level of brightness by setting the shutter speed to
work slower than normal at 1/60 sec. However, this setting is not suited to rapidly
moving objects or objects whose movements need to be captured in real time because
image updating depends on the shutter speed. The maximum shutter speed value can
be changed using this setting.
MKC-307 0710 VOL1(U)(E)
8
ԟ Still Screen Button
By pressing this button, the screen can display still images. In addition, the still image
can be flipped if the flip image function is available using the Function Buttons Ԩ.
Ԡ Still Image Mix Button
It is possible to display the current moving image along with the still image of the
subject at a certain point. The still image to be displayed will be either the image from
when the Still Screen Button was last pressed ԟ or the image stored through still
image storing for mixing, assigned to Function Buttons Ԩ depending on the menu
setting.
ԡ Arrow Buttons
The scene file can be selected using the arrow buttons. Writing into the scene file is
executed from the menu.
With the menu screen displayed, the cursor is moved by the “χ” and “ω” buttons to
select the item that you wish to set up. To change the content of the item to set up, the
setting value is selected using “φ” and “ψ” buttons.
Ԣ USB Connector
Used to connect a USB storage device to store still images. When the optional moving
image shooting function is utilized, a HDD-type USB storage device should be
connected.
ԣ Red Correction Control Knob
The knob used to make fine adjustments to the red color level of the image.
Ԥ Blue Correction Control Knob
The knob used to make fine adjustments to the blue color level of the image.
ԥ Shutter Button
Maintains the output level on image signals to a certain level by controlling the shutter
speed automatically. Automatic switching is possible from 1/60 second to 1/10000
second. By combining this button with the Gain Button Ԧ, an optimal image can be
output regardless of the brightness of the subject.
MKC-307 0710 VOL1(U)(E)
9
Ԧ Gain Button
Maintains the output level of the image signals to a certain level by controlling the
internal sensitivity setting for the camera automatically when shooting a dark scene
after a bright scene. It is possible to select whether sensitivity is increased to +6dB
(2-fold) or to +12dB (4-fold) in the menu. The optimal image can be output regardless of
the subject brightness by combining this button with the Shutter Button ԥ.
ԧ Outline Enhancement Button
Mainly enhances the outline correction for flesh color. It also has an enhanced function
allowing it to be possible to enhance the outline near the color selected in the menu.
There are 8 colors that can be selected; “flesh,” “red,” “orange,” “yellow,” “green,”
“cyan,” “blue” and “magenta.”
Ԩ Function Buttons
Functions (still screen, still image saving, moving image recording start/stop,
fluorescein, scene file switching, still image mix, still image saving for mix, flip image)
can be assigned to these buttons. The same functions can be assigned to the foot
switch. Please see “Foot Switch Mode” (P23) for the menu screen for assignment.
Still screen: The same function as Still Screen ԟ.
Still image saving: Takes a still image of the current camera image into the USB
storage device connected to the USB connector. The image
quality setting is 640 x 480pix JPEG. The saving quality can be
changed through the menu.
Moving image recording start/stop: Records moving images in the HDD-type USB
storage device connected to the USB connector (optional).
Recording is started with the first button press and is
completed with the second button press.
Fluorescein: It is possible to specify the coloring of the output and faithfully
display the color expression on the monitor when fluorescein
unique to ophthalmologic treatment is injected.
Scene file switching: Scene file can be switched between scene file 1 loading, scene
file 2 loading, scene file 3 loading and scene file 4 loading
every time the button is pressed.
Still image mix: The same function as Still Image Mix Button Ԡ.
Still image saving for mix: Saves the still image for still image mix. It may not be used
depending on the menu settings.
MKC-307 0710 VOL1(U)(E)
10
Flip image: Flips the image being shot or still image horizontally (Mirror),
vertically (Flip) or both together (Rotate).
ԩ Image Enhancement Button
It is possible to enhance the graduation sequences for a dark subject in a bright scene
or a bright subject in a dark scene with very good results.
This image enhancement technology has been developed by Apical Limited.
Ԫ Menu Button
Displays the menu from which the user can set up the options on the monitor screen.
Select the item to be configured using the Arrow Buttons Ԣ and confirm the selection
with the Select Button ԫ. For configuration of menu items, please refer to the section
on menu operation.
ԫ Select Button
This button is pressed to confirm the item to be configured when the menu is displayed.
Please refer to the section on menu operation.
MKC-307 0710 VOL1(U)(E)
11
CCU Rear
Ԙ CAMERA Connector
Connects to the CAMERA connector of the CAMERA HEAD through the CAMERA
cable.
ԙ MIC IN Connector
Sounds are input through this connector when they are output to an external device
connected through the DV terminal.
Ԛ DV OUT Connector
It is possible to digitally output camera images by connecting to a video tape recorder
or other similar devices through the DV terminal. * Please be sure to read “Notes on DV
connection” on the next page when using DV OUT.
ԛ S-VIDEO OUT Connector
Outputs Y/C VIDEO signals.
Connects to monitors, etc. with S-VIDEO input through an S-VIDEO cable (optional).
ԚDV OUT Connecto
r
ԙMIC IN Connecto
r
ԘCAMERA Connecto
r
ԛS-VIDEO Connecto
r
ԣLAN Connecto
r
ԜVIDEO Connector
ԝGENLOCK Connecto
r
ԤKB/MOUSE Connecto
r
ԥUSB Connector
ԦVGA Connector
ԞTRIGGER Connecto
r
ԟFOCUS Connecto
r
ԢRS-232 Connecto
r
ԡRGB OUT Connecto
r
ԠFOOT SW Connecto
r
ԨAC In
p
ut Connecto
r
ԧGround Terminal
MKC-307 0710 VOL1(U)(E)
12
Ԝ VIDEO OUT Connector
Outputs two channels of an ENCODER VIDEO signal. It can connect to monitors, etc.
with VIDEO IN input connector through a VIDEO cable (optional).
ԝ GEN LOCK IN Connector
VBS/BBS Connector for GEN LOCK.
Inputs the synchronization signals from the other system when this product is used and
synchronizing the phase with the other system.
Ԟ TRIGGER Connector
Used to take in images in synchronization with the external trigger signal.
TRIGGER Connector
(HR10A-7R-5S)
1 TRIGGER IN
2 IN RET
3 TRIGGER OUT
4 OUT RET
5 AUX
ԟ FOCUS Connector
Connects to the cable from the remote controller for the optional microscope adapter
CXA-301R.
FOCUS Connector
(HR10A-7R-5S)
1 AUX
2 GND
3 AUX
4 FOCUS
Ԡ FOOT SW Connector
It can connect a FOOT SW cable from the double foot switch (optional). Front panel
function button F1 is assigned as FOOT SW-1 and F2 as FOOT SW-2.
MKC-307 0710 VOL1(U)(E)
13
FOOT SW Connector
(D-sub9-pin female)
1 FOOT SW-3 6 FOOT SW-2
2 COMMON 7 䋭
3 FOOT SW-1 8 䋭
4 FOOT SW-4 9 䋭
5 GND
ԡ RGB OUT Connector
Outputs RGB VIDEO signals. Connects to the monitor, etc. to an RGB input connector
using the optional RGB cable. A commercially available D-sub-BNC x 5 cable can also
be used.
In addition, Y/C output and VBS output are also available.
RGB Connector
(High-density D-sub15-pin female)
1 R OUT 9 —
2 G OUT 10 GND
3 B OUT 11 —
4 Y OUT 12 —
5 C OUT 13 SYNC
6 GND 14 VBS
7 GND 15 —
8 GND
Ԣ RS-232C Connector
Used to execute camera control from an external source (optional).
RS-232C Connector
(D-sub9-pin male)
1 CD 6 DR
2 RD 7 RS
3 SD 8 CS
4 ER 9 CI
5 SG
MKC-307 0710 VOL1(U)(E)
14
ԣ LAN Connector
Used for the DICOM image filing system (optional).
Ԥ KB/MOUSE Connector
Connects to the bifurcated PS/2 cable.
ԥ USB Connector
Connects the USB storage device. A USB memory or USB HDD is connected to record
still images and USB HDD to record moving images.
Ԧ VGA Connector
Connects to a VGA monitor.
ԧ Ground Terminal
The system is grounded using this terminal when grounding is required.
Ԩ AC Input Connector
Be sure to use the AC cable included as an accessory.
Use the following fuse for replacement:
51NM030H 5 x 20mm snap disconnection type glass tube fuse 3A
MKC-307 0710 VOL1(U)(E)
15
2. Operation
Connecting
Terminate the output from RGB OUT and VIDEO OUT with 75: at the receiving side.
Peripheral equipment to be connected to the MKC-307 should be UL approved equipment.
Notes on DV connection
The DV output of this product only outputs image signals and sound signals in DV
format and does not have the function to exchange the control signals with
external devices.
It may not operate properly depending on the connected device when this product
and a DVD recorder, etc. are connected by DV.
For DV devices listings confirmed to operate properly, please contact our
personnel.
Camera Head
Color Monitor
VGA Monitor
HDD/DVD Recorder
Mono
Microphone
Focus Controller
Foot Switch
AC Plug
MKC-307 0710 VOL1(U)(E)
16
Starting up the power
Turn ON the power to the external devices such as the monitor. Check that the CAMERA
HEAD and CCU are connected through the camera cable and then turn ON the CCU power
(POWER switch). When the CCU power is turned ON, the MKC-307 (CAMERA
HEAD+CCU) executes initialization using the built-in computer. Although a green color is
displayed on the monitor screen during this initialization, this is not a failure. The images
from the camera will be output in the same conditions in which the camera was used the last
time1 when initialization is completed.
* Be sure to turn OFF the POWER switch and disconnect the device from the mains supply
and connection cables for the devices when moving the main unit of this product.
Caution:
Notes on Connecting/Disconnecting the camera cable
Be sure to turn OFF the power to the main unit when
connecting or disconnecting the camera cable that connects
the camera head to the CCU.
Inserting/removing the camera cable with the main unit
power ON may lead to product failure.
1 If the power is turned OFF while in still screen status, the status will not be maintained when the power is
turned ON again and it will be set to normal shooting mode. The still image for still image mix will also be
cleared.
MKC-307 0710 VOL1(U)(E)
17
Setting up auto white balance
Turn the power switch to ON to bring the MKC-307 into immediate operating status.
However, auto white balance needs to be set up when MKC-307 is used for the first time, or
the light source has been changed and so forth.
<Operation>
Ԙ Shoot a large picture of a white subject on the screen. Set the image level so that
the white subject is not too bright on the screen and press the AWB button.
ԙ “Auto White Balance” will be displayed on the monitor screen and “OK” will appear
when auto white balance is completed.
*“Too Dark” will be displayed if the image level’s brightness is too low.
If auto white balance completes as “NG,” check the image brightness level, etc. again
and press the white balance button again.
Auto White Balance Auto White Balance
= O K =
White Balance Button
MKC-307 0710 VOL1(U)(E)
18
*** MENU ***
Video Adjust
AE Mode
DTL Set
Field/Frame
Auto Adjust
Scene File
Foot Switch Mode
Title
JPEG Parameter
Sound Level
Date/Time Adjust
Inverse Mode
Image Enhancement
Overlay
Trigger
Miscellaneous
3. Menu Operation
MKC-307 is equipped with various useful functions in its operation. These functions can
be selected and set up from the menu.
The basic operation procedure is provided as follows:
Operation Procedure
1. Pressing the menu button on the CCU front panel will bring up the display on the
screen where you can set up various camera functions.
2. Select the item using the arrow keys (χω) on CCU front panel and press the Select
Button to confirm the mode.
Menu
Menu Enter
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Cloud CXA125-2250 Series User manual
-
Lincoln MKC Owner's manual
-
-
-
-
-
-
VADDIO WIDESHOT WALLVIEW SR User guide
-
-