Logan XTC6100 Owner's manual

Logan
Brand
Logan
Model
XTC6100
Category
Hand tools supplies
Type
Owner's manual
Logan Graphic Products, Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1-800-311-6232 www.logangraphic.com
J2107N
LOGAN
GRAPHIC PRODUCTS, INC.
Tools for Art - Tools for Life
®
Fig 1 Fig 2
Fig 3 Fig 4
Fig 5 Fig 6
Remove the Blade Storage cover located at the tip of
the handle, and take out a new blade (Fig. 1).
Unscrew the Blade Locking Screw from the Sliding Nut.
Place the blade into the blade groove, making sure the
hole in the blade lines up with the hole in the Sliding
Nut. Replace and tighten Blade Locking Screw (Fig. 2).
1
2
3
Blade Installation
Adjust the strip width by turning the Knob to the desired
width. Use the Ruler Guide to determine the width
(Fig. 3).
Loosen the Blade Locking Screw, and adjust the depth
of the blade. Tighten to lock depth (Fig. 4).
NOTE: We suggest putting the Strip Cutter at the edge
of the material, and extending the blades past material
into your underlayment for clean cuts.
Grip and pull through suitable cosplay materials. Can
be used with a straight edge (Fig. 5) or freehanded
(Fig. 6).
1
2
3
Cutting
Uses parallel blades with an adjustable width to cut strips of various cosplay materials. Can be
adjusted to cut strips from 3/16” (5 mm) to 2 1/2” (64 mm) in width out of suitable cosplay material
up to 1/2” (13 mm) thick. Features include adjustable blade depth, ergonomic handle with
on-board blade storage. Use replacement blades WC-5 or WC-20.
NOTE: Make sure to use foam board underlayment when cutting.
CAUTION: BLADES EXTREMELY SHARP
C
Use replacement blades XC-5 or XC-20
Tools Bringing Cosplay to life
®INSTRUCTIONS
Strip Cutter
Model XTC6100
USE EXTREME CAUTION WHEN INSTALLING BLADES AND
USING THIS TOOL. ALWAYS LOCK BLADES INTO THE SAFETY
POSITION WHEN NOT IN USE.
USE EXTREME CAUTION DURING THS STEP
  • Page 1 1

Logan XTC6100 Owner's manual

Logan
Brand
Logan
Model
XTC6100
Category
Hand tools supplies
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents