Ledges
Dividers
Shelf markers
Optional Accessories Model # Qty.
• Ideal for POP displays and seasonal promotions.
• Four different heights:
48˝ with four shelves
54˝ with four shelves
63˝ with five shelves
74˝ with six shelves
• Four different lengths, 22˝, 24˝, 30˝ and 36˝.
• Extra shelves available.
• Top and bottom shelves are flat wire shelves.
• Intermediate shelves are Add-A-Shelf
®
shelves,
which can be used either flat or sloped to enhance
merchandise.
• Open-wire construction promotes higher visibility.
• Tapered split sleeves of ABS plastic create a pos i tive
lock - no tools needed to assemble.
• Posts are numbered in increments of 1˝ (25mm) to
ensure fast and level assembly.
• 2
3
⁄8˝ (60mm) decorative black casters, all with
brake.
• Standard finishes: black, red, white, Valu-
Master
®
pewter grey, and Valu-Gard
®
green epoxies.
EG8129 Rev. 08/11
Foodservice Division: (800) 441-8440
MHC/Retail Display Divisions: (800) 637-5100
FAX: (302) 653-2065
For custom configuration or fabrication needs,
contact our SpecFAB
®
Division.
Phone: (302) 653-3000. FAX: (302) 653-3091.
E-mail: [email protected]
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
100 Industrial Boulevard • Clayton, DE 19938-8903 USA • (302) 653-3000 • www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
Foodservice Equipment • Material Handling, Healthcare & Cleanroom Equipment • Retail Display
Product
Announcement
both units shown with copper vein epoxy finish
New
New
Aisle
Merchandising Carts
6-tier unit with Add-A-Shelf
®
Shelves (in the flat position)
4-tier unit with Add-A-Shelf
®
Reverse
Mat Shelves (at a 30˚ angle)
Note: Special finishes “copper vein” and “silver vein”
may not be in stock, and require a setup charge based
on quantity ordered.
Add-A-Shelf
®
shelves allows for addition of extra
shelves, or removal for total flexibility.
Foodservice Division: (800) 441-8440 • MHC/Retail Display Division: (800) 637-5100 • Fax: (302) 653-2065 • www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Aisle Merchandising Carts
post number
shelf width x length height of
in. mm in. mm shelves * model # list
14˝ x 22˝ 356 x 559 48˝ 1219 4 MC1422-48-4 537
14˝ x 24˝ 356 x 610 48˝ 1219 4 MC1424-48-4 516
14˝ x 30˝ 356 x 762 48˝ 1219 4 MC1430-48-4 524
14˝ x 36˝ 356 x 914 48˝ 1219 4 MC1436-48-4 528
14˝ x 22˝ 356 x 559 54˝ 1372 4 MC1422-54-4 491
14˝ x 24˝ 356 x 610 54˝ 1372 4 MC1424-54-4 469
14˝ x 30˝ 356 x 762 54˝ 1372 4 MC1430-54-4 478
14˝ x 36˝ 356 x 914 54˝ 1372 4 MC1436-54-4 482
14˝ x 22˝ 356 x 559 63˝ 1600 5 MC1422-63-5 569
14˝ x 24˝ 356 x 610 63˝ 1600 5 MC1424-63-5 543
14˝ x 30˝ 356 x 762 63˝ 1600 5 MC1430-63-5 555
14˝ x 36˝ 356 x 914 63˝ 1600 5 MC1436-63-5 559
14˝ x 22˝ 356 x 559 74˝ 1880 6 MC1422-74-6 657
14˝ x 24˝ 356 x 610 74˝ 1880 6 MC1424-74-6 625
14˝ x 30˝ 356 x 762 74˝ 1880 6 MC1430-74-6 636
14˝ x 36˝ 356 x 914 74˝ 1880 6 MC1436-74-6 640
shelf width x length weight
in. mm lbs. kg model # list
14˝ x 22˝ 356 x 559 6 2.7 A1422 75
14˝ x 24˝ 356 x 610 6 2.7 A1424 69
14˝ x 30˝ 356 x 762 7 3.2 A1430 71
14˝ x 36˝ 356 x 914 8 3.6 A1436 71
Additional Add-A-Shelf
®
Adjustable Shelves
Patent # 5,884,567
shelf width x length weight
in. mm lbs. kg model # list
14˝ x 22˝ 356 x 559 6 2.7 D1422 79
14˝ x 24˝ 356 x 610 6 2.7 D1424 79
14˝ x 30˝ 356 x 762 7 3.2 D1430 73
14˝ x 36˝ 356 x 914 8 3.6 D1436 73
Additional Add-A-Shelf
®
Reverse Mat Shelves
Patent # 5,884,567
* Top and bottom shelves are standard wire shelves. Intermediate shelves are Add-A-Shelf
®
shelves.
Shelf Units
When ordering, specify epoxy finish desired by adding the corresponding suffix to end of model number.
• Suffix “BL” = Black epoxy
• Suffix “R” = Red epoxy
• Suffix “W” = White epoxy
• Suffix “V” = Valu-Master
®
pewter grey epoxy
• Suffix “VG” = Valu-Gard
®
green epoxy
• Suffix “CV”* = copper vein epoxy
• Suffix “SV”* = silver vein epoxy
(Example: Model #A1430W indicates a 14˝ x 30˝ Add-A-Shelf
®
Adjustable Shelf with white epoxy finish.)
* Special finishes “copper vein” and “silver vein” may not be in stock, and require a setup charge based on quantity ordered.
/
