Sylvania SRT2420P Owner's manual

Brand: Sylvania

Model: SRT2420P

Category: LCD TVs

Type: Owner's manual

FEATURES

SYLVANIA

20 INCH

COLOR TELEVISION

SRT2420P

* Flat Screen Picture Tube

• 181 Channel Selection- All VI:[F,'UIIF chamtels plus up to t25 cable channels.

* PLL Frequency Synthesized Tuning- The late.-t PLL I"rcqueucy synthesized ele_-tr_)i_ tun-

ing system provide_ free and easy t-hanne| selection, and lets you tune di_ctly to any channel

using the channel number humans ttb-9 and + I{K)-key) on the remole t'ontr_&

• On-Screen Function Display

* MTS/SAP Tuner

• Sleep Timer

• Closed Caption Decoder- You may view specially labelext tee/"1%' pl'ogram._, movie_, new_.

prerecorded ropes, elc. with eifher a dialogue capdon or text disphty adtk'd to the progranl.

. Auto Shut Off Function- 11"there is no signal input I_m the -uate.nna terminal and n_ user

operati_m for t5 minutes, iheTV will turn itself off aultm_atically.

• V-CHIP- Enables parents t_ prevent their children from watt'hing inappropriak- material on TV

. S-VIDEO input- Allows you to get better picturedetail and clarity.

• Front AV Input

• Rear Audio Input

PRECAUTIONS

* Pla_:e your "1%'in a rm_m with adequate _,endlmitm.

• Keep your TV set away from sources of direct heat, sut'h a.she_t registers or direc! sunli2dat.

• Do t'_otplace your TV ou _Jf! surfaces. _:uch a.srugs ot hbuzkets.

• Leave enough tx_m_ for air to eircutatt, around Ihe Ix_.tt_rt, tup and b;_.'k or"d_e set.

The __erial number of this product may be found on the back of the TV. No otl_rs have the same

_-.'.fialtttm_bcr as yours. You .'4r,ould record the i_tuuber ant] other vital iltK_l'm_ttion here and I'etain

thi,q b_ok as a permanent record of your purt'hase to aid ideatification in ea_e of thell.

Dealer Purcha>,e ti'om _lt_el No.

Dealer Attdress Scria Nu,

ANTENNA/CABLE CONNECTIONS

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

MISE EN GARDE:

P(IUR EVITER LES CH(IC ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

CLOSED CAPTION

VHF Antenna

(Not supplied)

UHF Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combinatic, n Antenna I_

(Not supplied) ]_"

UHF/VHF Rod l

antellna

(Nol supplied) _

_Some cable TV systems use scram-

bled signals and require a special con-

verter to receive these channels.

Consult your local cable company.

CATV Box _

or Satellite Box

(Not supplied)

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

From (?able Systeln

FCC WARNING- This equip-

ment may generate or nse radio

h'equency energy. Changes or

modifications to this equipment

may cause harmful interl_rence

unless the modifications are

expressly approved in the

instruction mamml. The user

could lose the authority to oper-

ate this equipment if an unau-

thorized change or modification

is made.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-

40 of the NEC that provides guidelines lor proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the grounding syslcm of the building

as close to the point of cable entry as practical.

This TV call receive C1 a_]d C2 Caption mid Text.

1) Closed Caption Characters can be displayed on the TV screen only when the received broad-

cast signal contains Caption Signals.

2) Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not inckMed, characters

will not be displayed.

Notes:

1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a

VCR's video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

2) Captions and texts may not match the TV voice exactly.

3) Interference may cause the closed caption system not to function properly.

4) The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

5) If you see this screen:

liH_3ilL_ [I]I] Pl

1) Displays the text on the screen by scrolling (max. 7 lines)

2) If the received broadcast signal does not contain caption or text signals, no change will occur.

If your TV displays a black box on tl]e screen, this means that your TV is set to TEXT mode. To

clear screen, select CAPTION C l, C2 or CAPTION [OFF].

WARNING: APPLI-

TO REDUCE THE R1SK OF FIRE OR ELECTR1C SHOCK, DO NOT EXPOSE TH1S

ANCE TO RA1N OR MOISTURE.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER

VIC]NG TO QUALIF]ED SERVICE PERSONNEL.

The important note is located Oll the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

[N THE LITERATURE ACCOMPANYING

THE APPLIANCE.

IMPORTANT SAFEGUARDS

1. Read instructions-All tile salety and opeiating instruc-

tions should be read belom the appliance is operated.

2. Retain Instructions-The salety and operating instiuc-

lions should be retained lot fultlre ielei'ence.

3. Heed Warnings-All warnings on the appliance and in

tile opeialing instiuctions should be adheied to.

4. Follow [nshuctions-AIl operating and use instructions

should be lollowed.

5. Cleaning-Unplug TV flom the wall outlel belore clean-

inT. Do nol use liquid cleaners oi aeiosol cleaners. Use

a damp cloth 1oi cleaning.

EXCH_TION: A product lhat is meant loi unillleriupt-

ed service and, that lot some specific reason, such as

the possibility of lhe loss of an authorization code lot a

CATV convelter, is not inlended 1o be unplugged by

tile ilser kli cleaning oi any olher puipose, may

exclude lhe mlerence 1o unplugging lhe appliance ill

the cleaning description olheiwise iequimd ill ilem 5.

6. Attachments-Do nol use attachlnents nol recolnlnended

by the TV n/anuhlcturei as they may cause hazards.

7. Water and Moisture-Do not use this TV neai walei, tot

example, near a bath tub, wash bowl. kitchen sink. oi

]aundiy lub, ill a wet basement, or lleai a swimming

pool. and the like.

8. Accessories-Do not place this TV on an unstable cait,

stand, tripod, bracket, or table. The TV may Iall caus-

ing serious illjUl} lo someone, and seriolls dalllage 1o

tile appliance. Use only with a cain, stand, nipod,

bracket, or table ieconnnended by lhe manulactuier, oi

sold with the TV.

Any mounting of the appliance shoukl Billow the man-

IIl_lctllreI 'S illstructions and shollld

Ilse a mollnling accessol T recolll- PORTABLECARTWARNING

mended by the manuhacturer. All

appliance and cait conlbinafion

should be moved with care. Quick

stops, excessive Iorce, and uneven

suilaces may cause lhe appliance

and cail combination 1o overlurll.

AMEIJBLES- Cet appareil ne doit g_tre placd que sur un

metlble (avec Oil sans iotllenes) ieCOlTImandd pal + ]e

fabricant. Si vous l'installez sur

kSpl syM_a_O_Wm,SSEMENrPOU_tin nleuble _ roulettes, ( acez LESCOMPOS*aTES

_PpAnSlL_7M_UBLEAnOULFrES

les deux enselllbles avec pi'eScau-

tion. Un arr_.t brusque, l'utilisation

d'tlne force excessive el des stir-

faces iii_guli_res risquent de

d4stabiliser I'ensen_ble et de le

ienveisel +.

9. Ventilation-Slots and openings in the cabinet and the

back ol +bottonl are piovided for ventilation and to

ensure reliable operation of the TV and to pl+otect it

Blurt/oveiheating. these openings nmst not be blocked

or covered. The openings shouM nevei ¸ be blocked by

phtcing the TV on a bed, sofa, rug, oi ¸ othei ¸ similar sur-

I_ace. This TV shoukl never be placed near or over a

radiatoi ¸ Ol+heat registei ¸. This TV shouM not be placed

B/a built-in installation such as a bookcase oi ¸ rack

unless pioper ventilation is piovided or the nlanufac-

turei's instl+tlctions have been adhel+ed to.

10. Powei ¸ Sources-This TV shouM be operated only from

tile type of power souice indicated on the nmrking

labeh If you are not sure of the type of powrer supply to

your honle, consult youi ¸ appliance dealei ¸ Ol+local

power colnpany. For TVs intended to opeiate B+om bat-

teiy I powei ¸, Ol+other sources, i'ele?i¸ to tile operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polaiized alternating-curient line plug(a plug having

one blade wider than the other). This plug will fit into

tile powei ¸ outlet only one way. This is a sal_ty feature.

ff you are unable to insert the plug fully into the outlet,

tD' reveising the plug. ff the plug shouM still fail to fit,

contacl your electl+ician to ieplace youi ¸ obsolete Otltlet.

Do not defeat the safety purpose of the polarized plug.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND

ELECTRIC

SERVIC£

NEO.NATIONALELEOTRIOALOODE

$2898A

ANTENNA

LEAD IN

WIRE

DISCNARGE UNIT

(N£C SECTION 810-20)

(NEC SECTION 810-21)

GROUNDCLAMPS

ELECTRODESYSTEM

(NECARTgSOPARTH)

12. Power-Cord Protection-Power-supply cords shouM be

routed so lhat lhey am not likely to be walked on oi

pinched by items placed upon oi against them. paying

pailiculai attention to cords at phlgs, convenience

receptacles, and the point where they exit fi'om the

appliance.

13. Outdoor Anlenna giounding-[f an outside anlenna or

cable system is connected to the TV, be sum the amen-

na or cable system is grounded so as to provide some

proteclion agaillsl voltage surges and buill-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, piovides inlonnation wilh respect

to propei grounding of the mast and suppolting stiuc-

rare, grounding of the lead-in wiie to an antenna dis-

charge unit, size of groundfllg conductors, location of

antenna-dischaige unit, connection to grounding elec-

trodes, and requirenlents B)I lhe giounding elechode.

(Fig. A)

14. Lighming-Foi added piotection tot this TV receiver

during a liglnning storm, or when it is left unattended

and tlmlsed B)I long peiiods (if lime. unplug il Irom lhe

wall oullel and disconnect the antenna or cable system.

This will prevent danlage to tile TV due to lighlllillg

and poweMine surges.

15. Power Lines-An outskle antenna system shouM not be

located ill the vicinity of overhead powei lines or other

electric light of powei circuits, or where it can hdl into

such powei lines oi circuits. When installing an outside

antenna system, extrenle care shoukl be taken to keep

flom touching such powei lines oi ciicuits as contact

with them nlight be IlEal.

16. OveiIoading-Do not overload wall outlets and extension

cords as this can result in a risk of fiie or electric shock.

17. Object and Liquid EntlT-Never push ot_iects of any

kind into this TV through openings as they may touch

dangerous voltage points oi shoi_ olll parts that could

result in a fiie or electric shock. Never spill liquid of

any kind on the TV.

18. Selwicing-Do not attempt to seivice this TV yourself as

opening oi relnovillg coveis lnay expose you to dall-

gerous voltage or other hazards. Reler all selwicing to

qualified seiwice personnel.

19. Damage Requiring Service-Unplug this TV Bum the

wall outlet and rater seiwicing to qualified service per-

sonnel under the Bdlowing conditions:

a. When the power supply cord or plug is danmged oi

fl+ayed.

b. If liquid has been spilled, or objects have hdlen into

tile TV.

c. If the TV has been exposed to rain oi water.

d. If the TV does not operate normally by Rdlowing the

operating instiuctions. Adjust only those controls that

lie covered by the operating instiuctions, as improper

adjttstlnellt of other co.trols may result in damage alKl

will olten requiie extensive woik by a qualified techni-

cian to iestore tile TV to its noilnal opeiation.

e. If the TV has been dropped oi damaged in any way.

L When the TV exhibits a distinct change ill pedof

mance-this indicates a need Ioi service.

20. Replacement Parts-When replacement pai_s aie

required, be sure the seiwice technician uses replace-

ment pans specified by the nmnulactumr that have the

same characteiistics as the original pm_. Unamhorized

subetitutions nmy result ill fire, electric shock, injulT to

peisollS oi other hazards.

21. Salety Check-Upon completion of any seivice or

repairs to this TV, ask the selMce technician to peiRnm

routine salety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV pioduct should be situated away Bum

heat souices such as iadiator_, heat registeis stoves, oi

other pioducts (including amplifiers) that produce Ileal.

OPERATING CONTROLS AND FUNCTIONS

- FRONT PANEL - - REAR PANEL -

"7"

1 2 3 4 5 6 7 8

- REMOTE CONTROL -

1. VIDE() (IN) jack- Connect to the video

output ,jack of a video camera, VCR, or

video game.

2. AUDIO L/R IN jacks- Connect to the

let1/Fight channel audio output,jacks ol a

video camera, VCR, OFvideo game.

Note: The AUDIO L (IN) ,jack is foF mouo

iuput. The sound is heaFd tYomboth speak-

ers. Use this ,jack for monaural audio equip-

ment to be hooked up.

3. HEADPHONE jack- To connect headphone

(not supplied) for personal listening.

4. MENU button- Press to display the menu

on the TV screen.

5. VOLUME (VOL) •/• buttons- Press to

control the volume level.

Press to determiue the setting mode fl'om the

meuu on the TV screen. (only the VOL •

button)

Press to select or adjust fl'om a particular

menu. (ti)r example: Language Selection,

Chmmel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

6. CHANNEL (CH) •/W bnttons- Press to

select memorized channel.

Press to select the setting mode E'om the

rnenu on the TV screen.

Press to select item you want to adjust in

the picture contFol mode.

7. POWER (PWR) bntton- Press to turu the

TV ON aud OFF.

8. Infrared Sensor Window- Receives the

infrared contFo1 signals from the remote

coutml unit.

9. MUTE button- Press the MUTE button to

turn off the souud poFtion of the TV pro-

gram. (Volume level display turns LIGHT

RED E'om LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume)

• or • button to restore SoEmd.

10.INPUT SELECT button- Press to select

TV or the external input (VIDEOI OF

VIDEO2) mode.

(See USING AUDIO/VIDEO INPUT JACKS.)

11.CHANNEL RETURN button- Press this

button to go back to the previously viewed

channel. FOF example, pressing the CHAN-

NEL RETURN button once will change

chanuel display fl'om CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

Irom CH 10 to CH 3.

12.DISPLAY bntton- Press to display the

chanuel numbeF on the screen. If you press

it again, the chanuel numbeF will disappear.

13.SLEEP button- Press the SLEEP button to

display the time and to staFt the timer. The

shut off time can be determined by the

numbeF of times you press the button. (0,

10, 20, 30,..90, 0 minutes)

14.GAME button- Press to set the Game

mode. To exit, press the INPUT SELECT

button.

(See USING AUDIO/VIDEO INPUT JACKS

aud PICTURE ADJUSTMENT.)

15.CHANNEL NUMBER buttons- Press two

digits to directly access the desired chaunel.

RemembeF to press a "0" before a single

digit chaunel.

+100 button- Press to select cable channels

higher thau 99.

16.AC cord- Conuect to a standard AC outlet

(120V/60Hz).

Note: Unwrap the AC coFd completely

from the backcover before plugging the

coFd into an AC outlet.

17.S-VIDEO inpnt jack- Connect to the S-

VIDEO output.jack of a video camera,

VCR, video game system usiug the S-

VIDEO cable (not supplied).

18.ANT(enna). IN jack- Connect to an anten-

na, cable system, or satellite system.

• A • , IA !

l) Slide the batteFy compartment cover back

on the remote unit.

2) Insert 2 "AA" penlight batteFies into battely

compartment in the direction as indicated

by the polarity (+ / -) markings. BatteFies

installed with incorrect polarity may dam-

age the remote uuit.

3) Replace the covet;.

When you use the AUDIO/VIDEO input

,jacks, select "VIDEO I" or "VIDEO2" mode

by pressing the INPUT SELECT button on the

remote control.

• To use the jacks on the back ol the TM select

"VIDEO l'.

• To use the jacks on the front of the TV.

select "VIDEO2".

Note:

• You may also set the Game mode and lront

A/V input at the same time by pressing the

GAME button on the remote contFo1.

"GAME" appears on the TV screeu and the

TV input switches to the front A/V input.

(See PICTUREADJUSTMENT.)

PREPARATION FOR USE

IIf,l_[Hl¥.,l[et _,'! NI!_ II(fl_l

If you want to ctlauge tbe language of tile on-screen menu, follow the proce-

dure below.

1) Connect the power cord to a standard AC outlet.

Note: If some digits appear ill tile corner of the screen,

press the POWER button without unplugging the power cord.

2) Press tile POWER button to turn on the TV.

3) Press tile MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) • or • button to point to "[ENGLISH]".

5) Select "ENGLISH" or "ESPANOL"=Spanisb by using

tile VOL(ume) • or • button.

6) Press tile MENU button to exit tile menu.

• ICTURE

CHANNEL SET

[ENGLISH] ESPA_IOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN;

PICTURE

CHANNEL SET

• [ENGLISH; ESPANOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN;

IN; IP'._I_I_IDImQ'_t_"1DIIIIIII_[1t

To preset a channel or to change a preset channel, follow the procedure below.

l) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears PICTURE

on the TV screen. • CHANNELSET

[ENGLISH] ESPANOL

3) Press the CH(annel) • or • button to point to "CHANNEL SET". V-CHIPSETUP

Ttlen, press the VOL(ume) • button. CAPTION[OFF]

TV SOUND [MAIN;

4) Press the CH(annel) • or • button to point to "AUTO PRESET CH".

Then, press the VOL(ume) • button.

ADD/DELETE

The tuner scans and memorizes all active channels in your area. • AUTOPRESETCH

• The TV distinguishes between standard TV channels and cable (CATV)

channels.

• When AUTO PRESET CH action is completed, file lowest memorized

channel reappears on the screen.

• When you press the CH(aunel) • or • button after selecting "AUTO PRESET CH",

the tuner will stop at tile memorized channels only.

• The TV may recognize TV channels to be CATV channels by receiving conditions. Ill this case,

try AUTO PRESET CH action again after checking antenna connections.

• When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"

will appear on the display after the completiou of the channel scauning.

[ADD/DELETE FUNCTION]

l) Press tile MENU button so that tile nlenu display, appears on the TV screen. I" PICTURE

2) Press tbe CH(aunel) • or • buttou to point to "CHANNEL SET". / • CHANNELSET

Theu, press the VOL(ume) • button. | V-CHIp[ENGLISH]sETESPANOLup

[

CAPTION [OFF]

TV SOUND [MAIN;

3P*estheVOLume'but*oo'h*ADDJD LET ec*edl 1

4) Use tile CH(annel) • or • buttou to select tile channel you wisb to put • ADD/DELETE

iRto lnel]-lory or to erase _rol]-i lnel]-lory. AUTO PRESET CH

Note: The display' will return to the normal screeu automatically in about

10 seconds.

Perfornl "ADD/DELETE" function while tbis display appears on the screeu.

• Press the VOL(ume) • or • button to light up tile chain;el number

in LIGHT BLUE if you wish to add the ctlaunel into memory.

• Press file VOL(ume) • or • button to ligtlt up tile chmmel number

in LIGHT RED if you wish to erase the chaunel from memory.

5) Press the MENU button to exit the menu.

You call listeu to a program in MTS stereo by followin

Mem_

cfion

SAP

bruadca_4 _.

Regulal -No_e-

S_eleo

broa Icasl STERE()

SAP SAP

MAIN

-Nolle-

STERE(-)

MAgN

MONO

-Nolle-

MONO

MAIN

the steps below.

--To show the status, press the DISPLAY

button ou the remote control.

SAP: Second Audio Program, wllich

meaus yoIJr program, Call also be

received ill a second language or

sonletimes a radio station.

lb Select STEREO, MONO or SAP in Stereo I}roadcastl

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the CH(annel) • or • button to point to "TV SOUND".

3) Press the VOL(ume) • or • button to select your desired stereo mode. ([MAIN;, [MONO] or

[SAP1.)

: Press the VOL(ume) • or • button.

PICTURE

CHANNEL SET

[ENGLISH] ESPA_IOL

V-CHIP SET UP

CAPTION [OFFI

• TV SOUND [MAIN1

[ PICTURE ] [ PICTURE

CHANNEL SET CHANNEL SET

[ENGLISH[ ESPANOL _ [ENGLISH] ESPA_IOL

V-CHIP SET UP V-CHIP SET UP

[ [CAPTION[OFF] ] / CAPTION[OFF]

J l• TVSOUND[MONO]J LI_TvSOUND[SAP]

t t

I't }k'IIkl I }gDLII_[IIi [I]_l

If tile power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly wheu the power resumes.

OPERATIONS

|'dAI (U l II_[ff*| lvl Ig ',{OIfl ',Jill I

1) Press the POWER button to turn ou the TV.

2) Select tile desired channel with the CH(annel) • or • button.

3) Adjust the volume to file desired listening level using the VOL(ume) • or • button.

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

gl }i i i I_[lli i II _[II MN| ikl I Nm,I

Tile sleep timer fuuctiou allows you to have the power automatically turn off

after a set time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

OU the renlote coutrol.

2) You may change tile sleep time by pressiug the SLEEP button on the

remote control repeatedly. The timer can be set up to 90 miuutes, 10 rain- SLEEP10

utes eacb time file SLEEP button is pushed. (The timer dis-

play, counts up and sleep time will be displayed on the screen To cancel the sleep tinier:

when you press the SLEEP button on remote coutrol.) Press the SLEEP button

Note: Wlleu you disconnect the unit from tile AC outlet, or if repeatedly until "SLEEP 0" is

you bave a power failure, the sleep time will be lost. displayed.

[lilI(O],'!DID][lif.*N',,Jli[O]_I_.'!NIID[li_II[O]_I

You ]nay view specially labeled (cc) TV programs, movies, uews, prerecorded tapes, etc. with

either a dialogue caption or text display added to the program.

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press tile CH(annel) • or • button to point to "CAPTION".

3) Press tile VOL(ume) • or • button to select the mode you wish.

4) Wllen done, press tile MENU button to exit file menu.

: Press the VOL(ume) • or • button.

'OTU"] IPOT RE] 'OT "1 'eTUdEl P T RE

CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SET

[ENGLISH] ESPANOL [ENGLISH] E SPAi_IOL [ENGLISH} ESPANOL [ENGLISH] ESPANOL [ENGLISH] ESPAi_OL

V-CHIP SET UP _ V-CHIP SET UP _ V-CHIP SET UP _ V-CHIP SET UP _ V_HIP SET UP

I_CAPTIONtOFFI / [ I_CAPTION{ ClJ / [ I_'CAPTION[ 021J [ I_CAPTIONtTI} ] { I_'CAPTION[ Z21

TV SOUND [MAIN} YV SOUND [MAIN} TV SOUND [MAIN; TV SOUND [MAIN} YV SOUND [MAIN;

t !

k*l[tl I I I llg'l H I LOIQ

I',,I[tl Ill 't _1'.*!I1!lgl Hi]I_i i

I) Press the MENU button so that tile menu display appears on the TV screen.

2) Press the VOL(ume) • button so that "PICTURE" is selected.

3) Select the feature you wish to adjust with tbe CH(annel) • or • button and a(ljust it with the

VOL(ume) • or • buttou.

GAME MODE

Set to the most suitable position for playback

of video games.

[+]:ON [-1 :OFF

BRIGHT

Adjust until file darkest parts of tile picture are

as bright as you prefer.

[+l : increase brightness [-I :decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+1 : increase contrast [-1 : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color [-] : be pale color

TINT

Adjust to obtain natural skill tones.

[+] : greeuish tone [-] : reddish toue

SHARPNESS

Adjust to detail ill file picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

• "+" is achieved by pressing the VOL(ume)

• button and "-" by pressing the

VOL(ume)• buttou.

• In the above steps, the picture adjustnlent

display will disappear h'onl the TV screen

automatically aRer about 10 seconds if you

do not press ally buttons. Press the MENU

and VOL(ume) • button so that "PIC-

TURE" is selected. Then, press the

CH(annel) • or • button repeatedly until

tile display retm'ns to tile screen.

• If you adjust ally picture control after you

set the Game mode to [ON], tile Game ]node

is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and select

tile flout A/V input at the same time by press-

ing the GAME button on the remote control.

"GAME" appears on the TV screen.

• To exit the Game ]node and t1"ont A/V input,

press tile INPUT SELECT button on tile

rePnote COl]trol.

• To cancel tbe Game ]node onl E acljust tile

picture control. The GAME mode will be set

to [OFF] automatically as explained in the

previous section. Ill this case, "VIDEO"

(external input mode) iustead of "GAME"

appears ou the TV screen.

• If you press the GAME buttou wlleu the TV

is off, the TV turns on and will be in tile

Game mode and will select front A/V input

mode automatically.

: Press tile CH(anuel) • or • buttou.

V-CHIP enables parents to prevent their cllildreu fronl watching inappropriate material ou TV.

V-CHIP reads the ratings flor programming (except for news and sports progralns, unedited

movies ou premium cable channels, and Emergency Broadcast System siguals), then denies access

to programming if the program's ratiug meets or exceeds file limitations you select. Ill this case,

"PROTECTED PROGRAM by ..." message appears ou tile TV screeu.

To block certain ratings, follow the steps ill the next page.

• Programming ]nay be rated by the Motion Picture Association of America (MPAA) or accord-

ing to the Television Parental Guidelines. In order to block any inappropriate programming, set

your limits ill botb places (MPAA RATING aud TV RATING).

• You cannot access the menu wheu the "PROTECTED PROGRAM by ..." message appears. Ill

this case, chauge to all unblocked channel, theu press the MENU buttou.

OPERATIONS (Continued)

[MPAA RATING SET UP]

_) Pre_s the MENU bntton so that the menu display appe u's on the TV

screen.

2) Press the CH(anne_) A or W barton to point to "V-CHIP SET Up-.

Then, press the VOL(nme) A button.

3) Use the number buttons to enter 4-digit access code. The default access

code is 0000. If yon have not set up your personal access code, you should

nse (/O00.

4 Pres', the CH(annel) A or _v button to point to "MPAA RATING".

Then, press the VOL(ume) A button.

5) Press the CH(anne_) A or V button to point to your desired item.

Then, press the VOL(ume) A button to select [BLOCKI or [VIE\W|.

• G: GeneralAudience

• PC: ParentalGuidancesuggested

• PC-13: UnsuitablelbrchiMrenunder 13

Mature audience only

® When you select the rating category and turn it to [BLOCK], the higher

rating will turn [BLOCK[ antomatic lily. A]so, the lower rating will turn

[VIEW Iantomatically.

® When you turn "G" to [BLOCK] or [VIEW], the fll ratings will mrn to

[BLOCK[ or [VIEW[ automatically.

® When you turn "X" to [VIEW[, the aHratings will turn to [VIE\W]antomaticaHy.

6) Press the MENU button to exit the menu.

PICTURE

CHANNEL SET

[ENGLISHI ESPANOL

• V-CHIP SET UP

CAPTION [OFF}

TV SOUND [MAIN I

ACCESS CODE

TV RATING

• MPAA RATING

CHANGE CODE

• G |VIEW|

PG [VIEW}

PC-13 |VIEW|

R [WEW]

NC-17 |VIEW|

x [WEW]

PICTURE

CHANNEL SET

[ENGLISH] ESPANOL

• V-CHIP SET UP

CAPTION [OFF]

TV SOUND MAN

ACCESS CODE

[TV RATING SET UP]

_) Press the MENU bntton so thtt the menu display appears on the TV

screen.

2) Press the CH(anne_) A or V button to point to "V-CHIP SET Up-.

Then, press the VOL(mne) A button.

3) Use the number bultons to enter 4-digit access code. The default access

code is 00()0. It you have not set up you*'personal access code, you should

nse (/O(/O.

4) Press the CH(annel) A or V button to point to "TV RATING".

Then, press the VOL(ume) A bulton.

5) Press the CH(annel) A or V button to point to yottr desired item.

Then, press the VOL(ume) A button to select [BLOCKI or [VIEW|.

• TV-Y: Appropriate lbr all chiMren

• TV Y7: Appropriate lbr chiMren se_en and oMer

• TV-G: General Audience

• TV-PG: Parental Guidance suggested

• TV 14: UnsuiDtble lbr chiMren under 14

• TV-N A: r_TV.Y

Mature audience only [ TV-Y7(

® When yon select the ratffig category and turn it to [BLOCK[ the higher rat- [ TV-G

h/g will turn [BLOCK[ aurora tticaH3. Also, the Mwer rating will tm'n TV-PG(

TVd4 (

[V1EW[ anton'mticflly. TV-MA(

• V RATING

MPAA RATING

CHANGE CODE

[VIEW]

)|VIEW|

[VIEW]

)[VIEW]

)[WEW]

)[VIEW]

TROUBLESHOOTING GUIDE

Sometimes a petlbnnance problem can be easily,solved by checking seemingly apparent but often over-

looked possibilities. Before arranging for service, check these items. It could save you time and money.

i,a[gl ILeJ',t$I ILeJ't Xgl I!W.,a_Ile[fl[IfA :1i_l _ ltJ Ill_'A_I i_[I]

QUICK SI£RVICE (HE(K IAST

--_ p_

= S,_

POSSIBI,E REMEI)Y

Twanewchlnnd, if OK,then pos iblestlHon trouble X X X X X X X X X X X X

Is TV ph/gged in _ X X

Powe_ I[ outk't?

t TV's POWER button on? X

t antenna connecRd to teHnma[ on rtw back of rtw s_t _ X X X X X X

tloutskk, anl_nnalsbeingued, check_>_b_okenwhe X X X X X X X X X X X

Check I)_ local intedck'nce X X X X X X X

Turn off wlth POWER button and rtwn tmn it on ;de_ _bout a minute X

Adiust COI,()R contwl X

Adiust CONTRAST & BRIGHT comlol X X

Check bated_ s h/R_ mote Control X

Move the TV aBg flora the nel_by sF'ake_s and appilances whk:h gent/ale a

magnetic fidd X

Turn oB using the P( B,VER button, then turn it on aglin 30 mhlutes ktRi o_ so

Closed Caption Problem Possible Remedy

My TV is showing captions that arc You are watching a live broadcast and spelling errors made by the

misspelled, closed captioning production company may pass through uncorrcct

ed. A prerecorded program will not show any misspelled words

because of the normal time available for editing the captions.

My TV will not show the text m its entirety Captions that are delayed a I;:w seconds behind the actual dkdogue

or there is a delay of what is being said. are common lbr live broadcasts. Most c_q)tionmg production compa

hies can display a dialogue to a maximum of 220 words per minute.

If a dialogue exceeds that rate. selective editing is used to insure thai

the captions remain up to date with the current TV screen dialogue.

My captions are scrambled with white Interk, rence caused by building, power lines, thunderstorms, etc.

boxes on the TV screen, may cause scrambled or incomplete captions to appear.

My program guide listed a TV show as Broadcaslers may at times use a time compression process It) the

being closed captioned actual program so that additional advertising time can be given.

but ilot]e of the caplions were displayed. Since lhe decoder Callt]ot read the compressed inlbnnation, captions

will be lost.

My prerecorded videotape does not show The videotape was either an illegal copy or the tape duplicating

any captions. The tape box mentions it company accidemally left out the captiotdng signals during the

being closed captioned, copying process.

My TV screen shows a black box on celtain You are in the TEXT mode. Select CAPTION ]]]ode or CAPTION

chmmels. [OFF].

_flMelM'/';111k'l',,Ixel I_1(l_':_lII[O]ef,'J

[11]1IIII N'd k_J'J_[ll I_1(If:ll II(11]_[€]

_/_@ As an ENERGY STAR® Partner, our company has determined that this product meets

the ENERGY STAR guidelines for energy efficiency. ENERGY STAR _ is a U.S. registered mark•

,_ When yOBtnrn "TV-Y" to [BLOCK] or [VIEW|, then aH ratings will tBrn to [BLOCK] or

[VIEW| automatically.

,_ When yOBtnrn "TV-MA" to [VIEW1, then aH ratings wHIturn to [VIEW| automatically.

*V-CHIP SET UP SUB RATINGS

When yon select TV-Y7, TV-PG, TV-[4, or TV-MA and yOBpress the VOL(ume) _ button, the

snb-rath/gs "_,iHappe tr on the TV screen.

if you select the rating category (example: TV-PG) ahd Rn'n it to [BLOdKI or

[VIEW[, the sub-ratings (examl)_e:V for Violence) will tBrn [BLOCK] or ]

[VIEW[ automatically. TV-Y7 ]BLOCK]

Yon can set the sub-ratings to [BLOCK[ or [VIEW[ individu dly when the _FV [BLOCK]

rating category is sel to [BLOCKI. To set the sBb-ratings individu dly, follow

the steps below.

* When you select ITS-Y7|: ]BLOCK]

Press the CH(umel) A or Wbutton to se]ect "FV" (Fantasy Violence). TV-PG [BLOCK]

Then, press the VOL(ume) _ button to se[ect [BLOCK] or [VIEW|. •D

(_ L [BLOCK]

® When you select [T%'-P ,], [TV-t4] or [TV-MA]: s [BLOCK]

Press the CH(annel) A or V button to select "D"(Snggestive [)ia_og), v BLOCK

"L"(Co lrse Language), "S'(Sexna] Sitnation), or "V"(Violence).

{_'TV-Y [VIEW|

The_, p]'ess the VOL(ume) _ bBtton to select [BLOCK] or [VIEW|. ]

Note: When yon select [TV-MA[, "D" does not appear on the TV screen. Tv-YrTv.G( )[VIEW][BLOCK]|]

® The sub-ratings which set to [BLOCK] al)pe lr next to the ]ating c ltegor 3 in TV-PG(DLSV}[BLOCK}]

TV-14 (DLSV)[BLOCK]|

the TV RATING menn. TV-MA( LSV)[BLOCKIJ

61 Press the MENU barton to exit the menn.

IV-CHIP ACCESS CODE]

To change access code, tblMw steps. PICTURE

])Press the MENU button, then press the CH0mnel) _k or _ button to select CHANNELSET

[ENGLISH] ESPA_IOL

V-CHIP SET UP. Press the VOL(ume) A barton to contiYlne. • V-CHIPSETUP

21Press the number buttons to enter boar old access code. If yon ha'_e never CAPTION[OFF]

set up your persona_ access code, use (tO00. TVSOUND[MAIN]

31Press the CH(mne]) _k or _ bntton to select CHANGE CODE. Then, press

the VOL(ume) A bntton to conthme. ACCESSCODE

41Use the number bnttons to enter yonr desired access code in the NEW

CODE space. Then, enter the same code in the CONFIRM CODE space.

Yonr new access code is set. You will return to the "V-CHIP SET UP'.

If the code in the CONFIRM CODE spice does not match the code in the

NEW CODE space, repeat step 4, making sBre 3OBenter the same new code

exacHyin the CONFIRM CODE sp _ce. TVRATING

MPAA RATING

Notes: • CHANGECODE

[t a power taUnre occurs, the default code, (/{}{/(}will be the access code.

, If 3on connect the power cold to an AC curler that is controlled b3 a v.iaH

switch, 3oar persona! access code will be erased every time you tam oft

the power at the wall switch. The default code will retm'n to O(}(}(L NEWCODE

[IF YOU FORGET YOUR ACCESS CODE] F------1

COMFIRM CODE

You shonld restore the lccess code to (/0(/0 as your lccess code,nl/pltlg the

TV's power cord for lt/seconds, then ph_g it in again.

MAINTENANCE

• Wipe the front panel and other exterior sur-

faces ol the TV with a soft cloth immersed

in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray

insecticide liquid near the TV. Such chemi-

cals may cause damage and discoloration to

the exposed surfaces.

Wipe the picture tube of the TV with a soft

cloth. Before cleaning the picture tube, discon-

nect the power cord.

SUPPLIED ACCESSORIES

Remote control unit Owner's Manual

(NEI43UD) (0EMN02409)

Batteries CAA" x 2)

SPECIFICATIONS

Television system: NTSC-M

TV Standard

Closed Caption

System:

Channel coverage

VHF:

UHF:

CATV:

Tuning System

Channel access:

Tel'lllillals

Antenna input:

Video input:

Audio input:

S-Video input:

Headphone:

Stereo Sound System

2 speakers

[ * _ * Ok

Sound output: I W, 8 ohm x2

§ 15.l 19/FCC

Remote control: Digital encoded

2 _ 13 infrared light system

14 _ 69 Operating

2 _ 13, A _ W, temperature: 5°C to 40°C

W+ 1 _ W+84, (41 °F_I04°F)

A-5 _ A-l, 5A Power requirements: ACI20V, 60Hz

181 channel Power consumption

frequency synthesized (Maximnm): 74W

Picture tube: 2(t"

tuning system

Direct access keyboard, Dimensions: H : 17-1/8" (435mm)

programmable W: 19-15/16" (506ram)

scan and up/down D : 17-15/16" (455mm)

Weight: 44.1 lbs. (20kg)

VHF/UHF/CATV

75 ohm unbalanced

(F-type)

RCA connector x 1

RCA connector x 4

Mini DIN 4-pin ,jack

1/8" stereo (3.5mm)

• Designs and specifications are subject to

change without notice and without our

legal obligation.

• If there is a discrepancy between lan-

guages, the default language will be

English.

ii:::::::::::: Your Home "_::::i::!::i::

::::::::i::i For repair- in your home -el all majo_ bf'aJ'=d_pptianc.es, ::::::::::::::::

::i::i::i lawn _nd garden equipment, or heating and cooling systems, i::i::i::i::

_!iii no matter who made It, no matter who sold It! i_i_

!i!!!ii For the ropk_cementparts, accessortes and i_i_i_i

_;_! OWnOI'Stl'_anualsthat you ne_J to Oo-il-yourself. ;::_::;::i

:::': For Soars professional installation of home appliano_s

:::::::::::::: and items like 9_rage door openc,rs and water hea_ers, i_i!_

1-800"-4-MY-HOME ® 1=-_0.._9-4_)

::::::::::::: Our Home :i::::i::::i

i!ii::i For _epair o! carry.,'_ items lil(e vacuums, lawn equipment, ::_ii::::

_::;i!:: and electronics, taft o_"go on-line forth_ Ioc_tio_ of _;,ur nearest _::_::i::;

i_i_ To pun.-hase _ proteC.tionagreement on _ productse;_v_ce,3by S_rs: :::::::

i 1-800-827-6655 ;,U.S._._ 1-800361-6665 (_._m_ ii

LiMiTED 90 DAY WARRANTY

of purchase, return it to your neare_ Soars store, and it willbe rap_t,_cedfree of chat_-.€.

T_iS wan"dnty_pl_Jes o_dy_ Ihis (p;_:lu_) is u_.._-x:llot private ho_sel_td purposo_.

This warranty gk'osyou specie iegal (_jP,ts, and yourr,ay also have o.'.herr,gh_ _h_:P,varyfrom state tosloe.

Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179

For the location of a Sea_ Service Center in your area : 1-800-488-1222

0EM._02409 |'rimed in ('hin:_

[.7405(J1: _ ÷ _" '_¢

Sylvania SRT2420P Owner's manual

Brand: Sylvania

Model: SRT2420P

Category: LCD TVs

Type: Owner's manual

Download PDF

report

Sylvania SRT2420P Owner's manual

Sylvania SRT2420P Owner's manual

Related papers

Other documents