Electrolux EYE030S1WE User manual

Page is loading ...

CONTENTS

1. SAFETY INFORMATION

....................................................................................3

2. SAFETY INSTRUCTIONS..................................................................................5

3. INSTALLATION.................................................................................................. 6

4. USER INTERFACE............................................................................................ 7

5. USAGE............................................................................................................... 8

6. FEATURES.........................................................................................................8

7. CARE AND CLEANING......................................................................................8

8. MAINTENANCE..................................................................................................9

9. WHAT TO DO IF.................................................................................................9

10. TECHNICAL DATA.........................................................................................10

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can

be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com/webselfservice

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.electrolux.com2

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes

injuries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge only if they have been given

supervision or instruction concerning using the

appliance in a safe way and understanding the

hazards involved.

• Do not let children play with the appliance.

• Keep all packaging items away from children.

• If the appliance has a child safety device, or a function

that limits the temperature permanently, we

recommend you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 8 years should be kept away

unless continuously supervised.

1.2 General safety

• It is most important that this instruction book should be

retained with the appliance for future reference.

Should the appliance be sold or transferred to another

owner, or should you move to another house and

leave the appliance, always ensure that the book is

supplied with the appliance in order that the new

owner can get to know the functioning of the appliance

and the relevant warnings.

• Correct functioning of your appliance does not only

depend on product quality, but on correct installation

by a qualified professional.

ENGLISH 3

• Never remove or damage stickers, warning labels or

nameplates attached to the appliance.

• A qualified technician carrying out the installation is

obliged to observe applicable national standards and

regulations concerning connection to the water

distribution system and the electric network. The

manufacturer is not responsible for any unprofessional

or incorrect installation.

• Check that the specifications written on the

appliance’s identification plate are the same as those

of the electrical power supply.

• This appliance is manufactured and tested in

accordance with valid regulations.

• To prevent scalds, While using the water heater,

always check the water temperature and adjust as

needed before use.

1.3 Special Information

• This appliance is intended to be used to store, heat

and provide drinking water and has no negative

impact on inlet water.

• The power cable may only be replaced (for example if

damaged) by a qualified contractor authorised by the

manufacturer, using an original spare part.

• The electrical installation must have an isolation

device which lets you disconnect the appliance from

the mains at all poles. The isolation device must have

a contact opening width of minimum 3 mm.

• Before any work on the appliance, disconnect all poles

of the appliance from the power supply.

• The water heater must be installed with the safety

valve, which has a non return valve (supplied with the

water heater).

• No hydraulic accessory needed to be installed

between the safety unit and the cold water inlet tube

service valve (plug valve, non-return valve, etc).

www.electrolux.com4

• Do not connect the water heater to the main power

supply without being sure that it is full of water,

otherwise the heating element may be damaged.

• Drain the appliance as described in chapter

"Maintenance-drain the appliance".

• Regularly activate the safety valve to prevent it from

becoming blocked, e.g. by limescale deposits.

• All the repair and maintenance must be carried out by

customer service authorized technicians.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Obey the installation instruction

supplied with the appliance.

• Remove all the Packaging items.

• Do not install or use a damaged

appliance.

• Before first time starting up, check the

appliance for any damage incurred

during transport.

• Never remove or damage stickers,

warning labels or nameplates

attached to the appliance.

2.2 Water Connection

• Make sure not to cause damage to

the water hoses.

•

The appliance is to be connected to

the water mains using suitable hose-

sets.

• Before you connect the appliance to

new pipes or pipes not used for a long

time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

2.3 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

To carry out all electrical

connection and installation

work in accordance with

relevant regulations.

• The appliance must be earthed.

•

Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

our Authorised Service Centre or an

electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.4 CE designation

The CE designation shows that the

appliance meets all essential

requirements according to the:

• Anti-legionella

• Low Voltage Directive.

• Electromagnetic Compatibility

Directive.

• RoHS directive.

ENGLISH 5

3. INSTALLATION

3.1 Accessories

The appliance is supplied with the basic

equipment required for their installation

and Usage, such as:

•

Safety valve.

This accessory is inside the packaging.

3.2 Placement

Both the wall on which the

water heater is to be

installed and the fixing wall

plugs and screws must hold

the weight of the appliance

full of water. If the wall is

very thin, back plates must

be used on the other side of

the wall. drill two holes on

the wall with size of 14mm

diameters and depth is

90mm.

90

mm

Ø =14 mm

260 mm

WARNING!

Do not install the appliance

in the following places:

• Outdoors.

•

Areas that are cold and freezing, the

freezing water may damage the

internal tank and pipes.

• Close to the ground.

• Where water discharge is not

possible.

The water heater can be placed

anywhere in the house. Nevertheless we

recommend placing it as near as

possible to the hot water tap, in order to

prevent temperature loss in the pipes.

The appliance can be installed in all

bathroom sections except marked zones.

3.3 Hydraulic Installation

• Before starting connection to the

water distribution system, it is very

important to clean inlet pipes properly

to prevent metal or other particles

from getting into the heater body.

•

Leave a minimum space of 40 cm

under the pipe outlet of the water

heater, to be able to gain access to

the electrical parts and to make

maintenance and repairing easier.

• If plastic pipes are being used, and in

order to carry out the installation

conditions, the pressure and

temperature conditions they are going

to undergo have to be taken into

account. A maximum pressure of 9

bars and maximum temperature of

70ºC, in normal conditions, or of

100ºC in abnormal conditions if the

safety thermostat switches off.

• In case of copper piping, connection

to the heater pipes must be made with

nonconductive sleeves to avoid

corrosion of piping (by direct contact

of iron and copper). Brass sleeve is

not permitted.

The water heater MUST be

installed with the safety

valve, which has a non-

return valve (supplied with

the water heater).

www.electrolux.com6

No hydraulic accessory

needed to be installed

between the safety unit and

the cold water inlet tube

service valve (plug valve,

non-return valve, etc).

• The pressure relief opening of the

safety unit can be connected to a

drain pipe, with a diameter that is at

least the same as the water heater

connection pipe, with a continuous

inclination and open to atmosphere.

Pressure relief valve works

only when the pressure

inside the heater tank

increases above

7+1bar ,relief will be in a

continuous water drops form

that comes out from

pressure relief opening.

WARNING!

If the main network pressure

is more than 5 bars, it is

OBLIGATORY to install a 3

or 4 bar pressure regulator

in the mains connection of

the house.

3.4 Electrical Installation

The heater may only be connected with a

single phase to alternating voltage 230V.

Connect the appliance to the power

source with a 1.5mm² cable for heating

element power 1200W or 1500W and

2mm² cable for heating element power

2000W.

Distance from appliance

location to the power supply

should be not more 5m long.

The cable earthing

conductor must be

connected to the earth or an

earthing wire must be led to

a prepared connector

indicated with the symbol

. This connection is

necessary due to safety, It

must be checked that the

electrical installation of the

premises or house is

equipped with an “EARTH”

line.

WARNING!

It is strictly forbidden to

tamper with or replace parts

(including the power supply

cable), as only the Technical

Support Services are

allowed to do it.

4. USER INTERFACE

1

2

3

1

Thermometer

2

Plastic panel

3

Heating Indicator Lamp

ENGLISH 7

5. USAGE

5.1 Filling

This sealed unvented

(pressurised) appliance is

intended for heating

domestic hot water. The

appliance can supply one or

more draw-off points.

Once the water heater has been

installed:

1. Open the water source valve.

2. Open the hot tap.

When the water starts to run through it

with constant flow, then the water heater

will be full.

3. Close the hot taps

4. Make sure there are no leaks in the

installation.

5. Connect the appliance to the power

supply.

WARNING!

Do not connect the water

heater to the main power

supply without being sure

that it is full of water,

otherwise the heating

element may be damaged.

6. FEATURES

6.1 Long life tank

The tank is equipped with magnesium

anode to protect the tank against

corrosion.

6.2 Safety

The appliance is protected from over-

heating over-pressure with three types of

safety:

•

Thermal fuse

• Relief valve

• Non return valve

6.3 HD

polyurethane insulation

foam

High-density polyurethane foam injected

between the inner tank and the outer

shell.

• To reduce power consumption.

• Keep heat loss controlled.

The material of the foam was chosen

carefully to give the best performance for

a long life.

7. CARE AND CLEANING

WARNING!

All the repair and

maintenance must be

carried out by customer

service authorized

technicians.

Regularly activate the safety

valve to prevent it from

becoming blocked, e.g. by

limescale deposits.

Appliance malfunctions should be

repaired immediately to keep the

performance of it.

A clean soft cloth or wet sponge can be

used for the cleaning.

Dis-solvent products are not allowed for

the cleaning.

www.electrolux.com8

8. MAINTENANCE

WARNING!

Before any work on the

appliance, disconnect all

poles of the appliance from

the power supply.

The water heater requires no special

maintenance. The anode rod helps

protect the tank against corrosion.

Depending on the water condition, the

magnesium anode rod may need to be

changed every 2 years. Galvanic and

electrolytic corrosion can damage the

tank if the anode rod worn out. Rusty

water is usually an indication of a worn

out anode rod. If rusty water is present,

you must call the authorized

professionals immediately for it to

examine anode rod and replace if

necessary.

The thermal fuse which based in the

thermostat, cuts both phases and leaves

the water heater without voltage; protect

the appliance from excessive electric due

to a possible thermostat fault, If this case

occurred, you must call the authorized

professionals for it to be repaired.

N

L

E

T

1

T2

T3

T4

1

234

1

Connected to main electric supply

main switch

2

Cable

3

Thermostat base

4

Heating indicator lamp

The manufacture reserves

the right to modify the

characteristics and

specifications of its products,

without prior notice.

8.1 Draining the appliance

WARNING!

Hot water may escape

during the draining process.

To drain the water from the electrical

storage water heater:

1. Disconnect the water heater from

power source.

2. Close the inlet water source from

service valve.

3. Disassemble inlet water hose from

cold water inlet pipe of the appliance.

4. Open the hot water tape the water

will drain off the inlet pipe.

9. WHAT TO DO IF

Certain problems are due to lack of simple maintenance or oversights, which can be solved

easily without calling the service technicians, before contacting the local service centre

please carry out the check listed below.

ENGLISH 9

Problem Possible causes Solution

Water leaks

Improperly sealed, hot or

cold water source connec‐

tions.

Tighten threaded connec‐

tions.

No hot water No power to heater.

Turn on electrical switch,

Check for blown fuses or

tripped breaker.

Insufficient hot water

Cold water mix fast with

appliance stored hot water,

high water source pres‐

sure.

Close the inlet water serv‐

ice valve(or the pressure

regulator) partially until the

problem disappear.

Wrong piping connections. Correct piping.

Wasted hot water.

Review and reduce hot

water consumption.

Long runs of exposed pipe. Insulate piping.

Hot water piping on out‐

side wall.

Insulate piping.

High operation cost (power

consumption)

Wrong piping connections. Correct piping.

Wasted hot water.

Review and reduce hot

water consumption.

Long runs of exposed pipe. Insulate piping.

Hot water piping on out‐

side wall.

Insulate piping.

Leaking Taps. Repair leaking taps.

Dripping from safety valve

High water source pres‐

sure.

Install a 3 or 4 bar pres‐

sure regulator valve in the

mains connection of the

house.

Brown (rusty) water from

outlet

Brown or rusty water indi‐

cates a worn out anode

rod

Call authorized professio‐

nals for anode rod exami‐

nation and replace it if nec‐

essary

10. TECHNICAL DATA

10.1 Details on energy

consumption

Product data complies with EU

regulations relating to the Directive on

the ecodesign of energy related products

(ErP).

www.electrolux.com10

EYE030S1WE EYE050S1WE EYE080S1WE EYE100S1WE

Load profile S M M

M

Energy efficien‐

cy class

D D D D

Energy conver‐

sion efficiency

[%]

29.1

34.4 33.2 33.0

Daily power

consumption

[kWh]

3.1

7.08

7.4

7.46

Annual power

consumption

[kWh]

634

1495

1548

1558

Default temper‐

ature settings

[°C]

60 60 60 64

Sound power

level [dB (A)]

15 15 15 15

Off-peak peri‐

ods possible

No No No No

10.2 Data table

EYE030S1WE EYE050S1WE EYE080S1WE EYE100S1WE

Model 30 50 80 100

V40 [l] -

68.2 101.2 124.6

Storage capacity [l]

30

- - -

Power [Watt] 1200 1200 1500 1500

Voltage [Volt] 230 V 230 V 230 V 230 V

Frequency [Hz] 50 - 60 50 - 60 50 - 60 50 - 60

Operating Pressure

[(bar) MPa]

(7) 0.7 (7) 0.7 (7) 0.7 (7) 0.7

Safety Valve pres‐

sure [bar]

7+1 7+1 7+1 7+1

Dimen‐

sions

[mm]

A 575 730 990 1140

B

445 595 855 1005

IP grade IPX1 IPX1 IPX1 IPX1

ENGLISH 11

EYE030S1WE EYE050S1WE EYE080S1WE EYE100S1WE

Inlet &

Outlet

Pipe size

diameter

[inch]

Male

thread

G ½ G ½ G ½ G ½

Min. water inlet

pressure [MPa]

0.1 0.1 0.1 0.1

Heat up time (Delta

T 45°C)

1h:0min 1h:55min 2h:40min 3h:40min

7

9

10

12

13

14

475 mm

440 mm

260

mm

5

6

4

3

2

1

B

A

8

11

1

Fixing bracket

2

Plastic support

3

Safety & Non return valve

4

Flexible hoses

5

Service valve

6

Cold water inlet pipe

7

Polyurethane insulation

8

Thermometer

9

Water tank

10

Hot water outlet pipe

11

Heating element

12

Magnesium anode

13

Plastic panel

14

Thermostat

11. ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol

. Put the packaging in applicable

containers to recycle it. Help protect the

environment and human health and to

www.electrolux.com12

recycle waste of electrical and electronic

appliances. Do not dispose appliances

marked with the symbol with the

household waste. Return the product to

your local recycling facility or contact

your municipal office.

ENGLISH 13

Page is loading ...

www.electrolux.com/shop

PHEWA0881

Electrolux EYE030S1WE User manual

This manual is also suitable for

Electrolux EYE030S1WE User manual

in other languages

Related papers

Other documents