Kenwood BLM600SI Owner's manual

Category
Blenders
Type
Owner's manual
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
126673/1
instructions
BLP61
BLM61
BLP60
BLM60
Type BLP60, BLP61
Type BLM60, BLM61
English 2 - 12
Nederlands 13 - 24
Français 25 - 37
Deutsch 38 - 50
Italiano 51 - 62
Português 63 - 75
Español 76 - 88
Dansk 89 - 99
Svenska 100 - 110
Norsk 111 - 121
Suomi 122 - 132
Türkçe 133 - 144
Ïesky 145 - 156
Magyar 157 - 169
Polski 170 - 183
Ekkgmij 184 - 197
Slovenčina 198 - 210
Українська 211 - 224
´¸∂w
522 - 632
safety
G
Read these instructions carefully and retain
for future reference.
G
Remove all packaging and any labels.
G
Switch off and unplug:
GG
before fitting or removing parts;
GG
when not in use;
GG
before cleaning.
G
Never fit the blade unit to the power
unit without the blender goblet or mill
jar fitted.
G
Always unplug the appliance before putting
your hands or utensils in the goblet.
G
Always take care when handling the blade
assembly and avoid touching the cutting
edge of the blades when cleaning.
G
Only operate the blender with the lid in place.
G
Only use the goblet with the blade assembly
supplied.
G
Never let the power unit, cord or plug get
wet.
G
Never use a damaged appliance. Get it
checked or repaired: see ‘service and cus-
tomer care’.
G
Never use an unauthorised attachment.
G
SCALD RISK: Hot ingredients should be al-
lowed to cool to room temperature before
blending.
G
Never leave the appliance unattended when it
is operating.
G
When removing the blender or mill from the
power unit:
GG
wait until the blades have completely
stopped;
GG
don’t accidentally unscrew the goblet or
mill jar/lid from the blade assembly.
2
BLP61/BLM61
G
Never run the blender empty.
G
Never blend more than the maximum
capacity stated in the recommended
usage chart.
G
To ensure long life of your blender or mill,
do not run it continuously for longer than
60 seconds.
G
Smoothie recipes - never blend frozen
ingredients that have formed a solid mass
during freezing, break it up before adding
to the goblet.
G
Do not process hard spices such as
Nutmeg or Turmeric root as they may
damage the blade.
G
Do not use the blender as a storage
container. Keep it empty before and after
use.
G
Always use the blender on a secure, dry
level surface.
G
Never place this appliance on or near a hot
gas or electric burner or where it could
touch a heated appliance.
G
This appliance shall not be used by
children. Keep the appliance and its cord
out of reach of children.
G
Misuse of your blender can result in injury.
G
Appliances can be used by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and if they
understand the hazards involved.
3
G
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
G
The maximum rating is based on the
attachment that draws the greatest load.
Other attachments may draw less power.
4
safety
IMPORTANT: HOT BLENDING
INSTRUCTIONS
To minimise the possibility of scalding
when blending hot ingredients keep
hands and other exposed skin away from
the lid to prevent possible burns. The
following precautions must be observed:
G
CAUTION: Blending very hot
ingredients may result in hot
liquid and steam being forced
suddenly past the lid or filler cap
.
G
We recommend that hot
ingredients are allowed to cool
before blending.
G
NEVER exceed 1200ml / 5 cups
capacity if processing hot liquids, such as
soups (refer to the markings on the
goblet).
G
ALWAYS commence blending at a low
speed and gradually increase the speed.
NEVER blend hot liquids by using the
pulse setting.
G
Liquids which tend to foam such as milk,
should be limited to a maximum capacity
of 1000ml/4 cups.
G
Take care when handling the blender as
the goblet and its contents will be very
hot.
G
Take particular care when removing the
lid. The lid is designed to be a tight fit to
prevent leakage. If necessary protect your
hands with a cloth or oven gloves when
handling.
G
Ensure the goblet is securely attached to
the base and when removing from the
appliance, guide the base and ensure it is
removed together with the goblet.
G
Ensure that the lid and filler cap are
securely in place before every blending
operation.
G
Always ensure that the vents in the filler
cap are clear before every blending
operation
.
G
When fitting the lid to the goblet always
ensure that the lid and goblet rim are
clean and dry to ensure a good seal and
prevent spillage.
5
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
G
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
Use your blender for soups,
drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs,
chopping nuts and crushing ice.
Use your multi mill (if supplied) for
milling herbs, nuts, coffee beans
and purées.
key
filler cap
lid
vents
goblet
sealing ring
blade unit
blade base
power unit
Power On indicator
speed + pulse control
TYPE BLM61 & BLP61 only
Programme buttons
drinks
ice crush
rinse
Multi mill (if supplied)
multi mill jar
grinding mill (if supplied)
mill lid
grinding mill blade assembly
grating mill (if supplied)
mill lid
grating mill blade assembly
to use your blender
1 Fit the sealing ring into the
blade unit - ensuring the seal is
located correctly in the grooved
area.
G
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Clip the blade unit into the base
.
3 Screw the blade assembly onto
the goblet ensuring the blade
assembly is fully tightened .
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
4 Put your ingredients into the
goblet.
5 Fit the filler cap to the lid and push
down to secure.
6 Fit the lid by pushing down until
secure.
7
Place the blender onto the power
unit .
G
T
he appliance will not work
i
f the blender is incorrectly
fitted.
8
Plug in and the indicator light will
r
emain unlit whilst in the “O” OFF
position.
T
YPE BLM60 & BLP60 - Turn
t
he speed control to select a
speed (refer to the recommended
usage chart).
G
Select a speed between ‘Min’ to
‘Max’ by turning the speed control.
At the end of blending return the
speed control to “O” OFF before
removing the blender.
G
Do not remove the goblet until the
blades have stopped rotating and
the speed control is in the “O” OFF
position.
G
(P) Pulse operates the motor in a
start/stop action. The pulse will
operate for as long as it is held in
position.
Note: If the blender is removed
from the power unit whilst a speed
is selected the Indicator light will
go out and the blender will stop.
The blender willl restart
immediately if refitted.
TYPE BLM61 & BLP61 only -
Turn to the “on” position and the
Power On indicator and the 3
pre-programmed buttons will light
up.
Note: In the “on” position the
Power On indicator will flash if the
goblet is not fitted to the power
unit.
In the “O” OFF position all the
indicator lights will remain off.
9 Select a speed (refer to the
recommended usage chart).
Choose one of the following
options:
6
G
S
elect one of the 3 pre-
programmed buttons. When the
r
equired programme button is
p
ressed the light on the other
button will go out. The blender will
s
witch off automatically at the end
o
f the pre-set time. If you wish to
stop before the pre-set time, press
t
he selected programme button
a
gain.
G
Select a speed between ‘Min’ to
‘Max’ by turning the speed control.
At the end of blending return the
speed control to “O” OFF before
removing the blender.
G
Do not remove the goblet until the
blades have stopped rotating and
the speed control is in the “O” OFF
position.
G
(P) Pulse operates the motor in a
start/stop action. The pulse will
operate for as long as it is held in
position.
Refer to the troubleshooting
section if you experience any
problems with the operation of
the blender.
hints
G
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
G
The processing of spices is not
recommended as they may
damage the plastic parts.
G
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole
in the lid.
G
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
7
Recommended Usage Chart (Programme buttons)
P
rogramme Usage/Food Max. Programme
Button Items Recommended Time
Q
uantity
Cold Liquids Max 1.6 litres 60 secs
D
rinks & Cocktails
M
ilkshakes and milk Max 1.2 litres
based drinks
S
moothies 1 litre Liquid
Drinks
Place the fresh fruit and
liquid ingredients in first
(includes yoghurt, milk
and fruit juices).
Then add ice or frozen
ingredients (includes
frozen fruit, ice or ice
cream)
Ice crushing- Automatic 10 ice cubes 45 secs
Pulsing action (200g)
Ice A change in speed will be
crush noted - this is normal.
Freeze fruit juice in ice
trays for Slushie type
drinks
A change in speed will be Max 500 mls 30 secs
noted - this is normal. warm water
Use to rinse the goblet
before taking apart
Rinse
for cleaning.
For best results always
take the blender apart for
cleaning and dry
thoroughly before
re-assembling.
8
Processing times stated are for guidance only and will vary depending on the
exact recipe used, ingredients being processed and personal preference. Stop
the processing when the desired result has been achieved.
9
to use your multi mill
(if supplied)
Use your multi mill for milling
herbs, nuts, coffee beans and
purees.
1 Put your ingredients into the jar .
Fill it no more than half full.
2 Fit the blender sealing ring into
the blender blade unit -
ensuring the seal is located
correctly in the grooved area.
G
Ensure that the seal is fitted
correctly.
3 Clip the blade unit
into the
base
.
4 Turn the blade unit
upside
down. Lower it into the jar, blades
down and turn to lock - ensuring
the blade assembly is fully
tightened
. Refer to the graphics
on the underside of the blade unit
as follows:
- unlocked position
- locked position
5 Place the mill onto the power unit
.
6 Select a speed or use the pulse
control.
to use your grinding
mill
(if supplied)
Suitable for grinding spices, coffee
beans and processing ginger,
garlic and chillies.
1 Place your ingredients into the
blade assembly
.
2 Fit the lid
and turn to lock .
3 Place the mill onto the power unit.
4 Select a speed or use the pulse
(P) control.
Recommended Usage Chart (Manual control)
U
sage/Food Recommened Speed Time
Items Quantity
Soups Stock based soups 1.2 litres Min - Max 30 secs
Soups using milk 1 litre
W
e recommend that hot ingredients are allowed to cool
before blending. However should you wish to process
h
ot ingredients please read the Hot Blending Safety
instructions.
Drinks Cold Liquids Max 1.6 litres Max 15 - 30 secs
Drinks & Cocktails
Milkshakes and milk Max 1.2 litres Max 15 - 30 secs
based drinks
Smoothies 1 litre Liquid Max 30 - 60 secs
Place the fresh fruit and
liquid ingredients in first
(includes yoghurt, milk
and fruit juices).
Then add ice or frozen
ingredients (includes
frozen fruit, ice or ice
cream)
Ice Ice crushing - operate in 10 ice cubes Pulse 15 - 20 secs
short bursts until (200g)
crushed to the desired
consistency
Mayonnaise Max 3 egg mix Max 60 secs
Batter Mix Max 1 litre Mid - Max 15 secs
Vegetable Purees/Baby food 300g Min - Mid 30 - 60 secs
Fruit Purees 200 - 500g Max 30 secs
to use your grating mill
(if supplied)
Suitable for grating parmesan
cheese, nutmeg, coconut and
d
ried fruit.
1 Place your ingredients into the
blade assembly
.
2
Fit the lid
a
nd turn to lock
.
3 Place the mill onto the power unit.
4 Select a speed or use the pulse (P)
control.
10
mill recommended speed chart
ingredients mill max qty speed operating
time
Herbs - best chopped Multi 15g MAX 5 – 10 secs
when clean and dry
Nuts Multi or Grinding 50g MAX 10 – 15 secs
Coffee Beans Multi or Grinding 50g MAX 30 secs
Baby Foods & Purees Multi 50g MAX 30 secs
Lean beef, cut into Multi 70g MAX 5 secs
2.5 cm cubes
Spices – such as black Grinding 50g MAX 30 – 60 secs
peppercorns, cardamom
seeds, cumin seeds,
coriander seeds, fennel
seeds, whole cloves etc.
Chillies Grinding 30g MAX 10 secs
Fresh Root Ginger Grinding 30g MAX 10 secs
Garlic Grinding 4 cloves MAX 10 secs
Parmesan Cheese cut Grating 60g MAX 10 secs
into 1cm cubes
Dried Fruit Grating 50g MAX 10 secs
Coconut Grating 50g MAX 20 secs
Nutmeg Grating 2 MAX 40 secs
hints
G
For optimum performance when
processing spices we recommend
that you do not process more than
50g at a time in the mill.
G
Whole spices retain their flavour
for a much longer time than
ground spices so it is best to grind
a small quantity fresh at a time to
retain the flavour.
G
To release the maximum flavour
and essential oils whole spices are
best roasted prior to milling.
G
Baby food/purees - allow cooked
food to cool to room temperature
before processing in the mill.
care and cleaning
G
Always switch off, unplug and
dismantle before cleaning.
G
Empty the goblet before
unscrewing it from the blade unit.
G
Do not immerse the blade unit in
water.
G
The goblet can be washed in your
dishwasher.
power unit
G
Wipe with a damp cloth, then dry.
G
Do not immerse the power unit in
water.
b
lade assemblies
blender and multi mill
G
R
emove the blade unit from the
g
oblet or mill by turning to the
unlock position to release.
grinding and grating mills
G
R
emove the lid from the blade
a
ssembly.
1 blender/multi mill: remove and
wash the sealing ring.
2 Don’t touch the sharp blades
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
3 Leave to dry upside down.
other parts
Wash by hand, then dry.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you experience any
problems with the operation
of the blender, before calling
for assistance refer to the
troubleshooting guide.
If you need help with:
G
using your appliance or
G
servicing or repairs
G
Contact the shop where you
bought your appliance.
G
Designed and engineered by
Kenwood in the UK.
G
Made in China.
I
MPORTANT INFORMATION
FOR CORRECT DISPOSAL OF
T
HE PRODUCT IN
A
CCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked
with a crossed-out wheeled dustbin.
11
12
troubleshooting guide
Problem Cause Solution
The Blender will not No Power/Power On Check blender
operate. Light not illuminated. plugged in.
Blender not assembled Check blade unit is
c
orrectly. fully tightened to
the goblet.
Power On Light flashing The blender has Turn the speed
slowly. been left plugged in and control to the
(BLP61/BLM61 only) in the ‘on’ position for “O” OFF position,
more than 15 minutes wait 5 seconds and
and has gone into then turn to “on” to
standby mode. reset.
BLP61/BLM61 Blender not Goblet fitted and speed Either select a speed
operating but Power On control turned to “on” but manually or press
and programme button speed or programme one of the
lights on. not selected. programme buttons.
Power on light flashing The goblet is removed Turn the speed
rapidly (BLP61/BLM61 only) from the power unit control to “O” OFF
without turning the speed and reselect a
control to “O” OFF. speed.
Programme buttons not Programme buttons will Turn the speed
operating not operate unless the control to “on” and
speed control is turned to select the required
the “on” position first. programme.
Blender leaking from blade Seal missing. Check seal is fitted
assembly. Seal incorrectly fitted. correctly and not
Seal damaged. damaged. To obtain
a replacement seal
see “service &
customer care”.
Blender seal missing from The seal is packed Unscrew goblet and
blade unit when removed pre-fitted to the blade check that seal is
from packaging. unit. fitted to blade unit.
To obtain a
replacement seal
see “service &
customer care”.
If none of the above solve the problem see “Service & Customer Care”.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236

Kenwood BLM600SI Owner's manual

Category
Blenders
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI