Yamaha RX-V573 Owner's manual

English

Français

Deutsch

Svenska

Italiano

Español

Nederlands

AV Receiver/Ampli-tuner audio-vidéo

G

Easy Setup Guide

Manuel de configuration rapide

Anleitung zur Schnelleinrichtung

Snabbinstallationsguide

Guida di configurazione rapida

Guía de configuración sencilla

Easy Setup-gids

RX-V373_esg_G_cover1.fm Page 1 Tuesday, January 10, 2012 1:56 PM

En 1

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1)

(not required if your TV supports ARC [Audio Return Channel])

1 Preparation

Accessories

 Remote control  Batteries

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

 AM antenna  FM antenna  YPAO microphone

 CD-ROM

(Owner’s Manual)

 Safety Brochure  Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the RX-V573 (U.S.A.

model), unless otherwise specified.

*The supplied FM antenna

varies depending on the

region of purchase.

Cables required for connections

Easy Setup Guide

English

AV Receiver

This document explains how to set up a 5.1- or 7.1-channel system (RX-V573

only) and play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is

supplied on CD-ROM. For more information about this product, refer to the

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

RX-V473_573_esg_C.fm Page 1 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

2 En2 En

Set up the speakers in the room using the following diagram as a reference.

For information on other speaker systems, refer to “Owner’s Manual”.

1 Front speaker (L)

2 Front speaker (R)

3 Center speaker

4 Surround speaker (L)

5 Surround speaker (R)

6 Surround back speaker (L)

7 Surround back speaker (R)

9 Subwoofer

2 Placing speakers

5.1-channel system

12

39

45

10° to 30°10° to 30°

7.1-channel system

(RX-V573 only)

45

1

2

39

67

30 cm (1 ft) or more

10° to 30° 10° to 30°

RX-V473_573_esg_C.fm Page 2 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

En 3

■ Connecting speaker cables

Speaker cables have two wires. One is for connecting the

negative (–) terminals of the unit and the speaker, and the

other is for the positive (+) terminals. If the wires are

colored to prevent confusion, connect the black wire to

the negative and the other wire to the positive terminals.

a Remove approximately 10

mm (3/8”) of insulation

from the ends of the

speaker cable and twist

the bare wires of the cable

firmly together.

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

d Tighten the terminal.

Using a banana plug

(U.S.A., Canada, China,

Australia and General

models only)

a Tighten the speaker

terminal.

b Insert a banana plug into the end of the terminal.

1

Connect the front speakers (1/2)

to the FRONT (//\) terminals.

2

Connect the center speaker (3) to the

CENTER terminal.

3 Connecting speakers/subwoofer

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm

speakers. When connecting 6-ohm speakers, set the unit’s

speaker impedance to “6 Ω MIN”. For details, see “Setting the

speaker impedance” in “Owner’s Manual”.

• (Except for U.S.A. and Canada models)

Use speakers with an impedance of at least 6 Ω.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable

from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch

each other or come into contact with the unit’s metal areas. This

may damage the unit or the speakers. If the speaker cables

short circuit, “Check SP Wires” will appear on the front display

when the unit is turned on.

FRONT

aa

b

d

c

– (black)

+ (red)

FRONT

a

b

Banana plug

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

The unit (rear)

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

The unit (rear)

RX-V473_573_esg_C.fm Page 3 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

4 En

3

Connect the surround speakers (4/

5) to the SURROUND (//\)

terminals.

4

Connect the subwoofer (9) to the

SUBWOOFER jack.

Connect the surround back speakers (6/

7) to the SURROUND BACK (//\)

terminals.

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

The unit (rear)

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

Audio pin cable

The unit (rear)

For 7.1-channel system (RX-V573 only)

FRONT CENTER SURROUND

SINGLE

SURROUND BACK/BI AMP

/ZONE B

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

1

67

2

3

45

9

The unit (rear)

RX-V473_573_esg_C.fm Page 4 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

En 5

4 Connecting external devices

FRONT CENTER SURROUND

SINGLE

SURROUND BACK/BI AMP

/ZONE B

AV 1

AV

2

AV 3

AV 5

AV 6

OPTICAL COAXIAL COAXIAL OPTICAL

(

TV

)

COMPONENT

VIDEO

COMPONENT

VIDEO

P

B

Y

VIDEO

AV

MONITOR OUT

OUT

AUDIO

AV 4

P

R

P

B

Y

P

R

HDMI 1

(

BD/DVD

)

HDMI 2

HDMI 3

HDMI 4

NETWORK

HDMI

OUT

ARC

FM

ANTENNA

AM

SUBWOOFER

SPEAKERS

INFO

MEMORY

PRESET

FM AM

TUNING

CONTROL

TV

BD

DVD

NET

RADIO

INPUT

SCENE

YPAO MIC

PHONES

SILENT

CINEMA

STRAIGHT

VIDEO

DIRECT

iPod/iPhone/iPad

5V 2.1A

AUDIO

VIDEO

VOLUME

AUX USB

TONE

PROGRAM

VOLTAGE

SELECTOR

110V

-

120V

220V

-

240V

HDMIOPTICAL

HDMI

OUT

ARC

HDMI HDMI

HDMI

O

AV 4

OPTICAL

(TV)

O

HDMI 1

(

BD/DVD

)

a

c

b

d

TV

Audio out

(optical)

HDMI in HDMI out

BD/DVD player

HDMI OUT

jack

HDMI 1 jack

AV 4 (OPTICAL) jack

The unit (rear)

To an AC wall

outlet

Turn on the unit

The unit (front)

VOLTAGE SELECTOR

(General model only)

1

Connect external devices to the unit.

a Connect a BD/DVD player to the unit with an HDMI

cable.

If the BD/DVD player is currently connected to the

TV directly with an HDMI cable, disconnect the

cable from the TV and connect it to this unit.

b Connect a TV to the unit with the other HDMI cable.

c Connect a TV to the unit with a digital optical cable.

This connection is required to play back TV audio

on the unit. This connection is not required if your

TV supports ARC (Audio Return Channel).

d Connect the power cable to an AC wall outlet.

• For information on how to connect radio antennas or other

external devices, see “PREPARATIONS” in “Owner’s Manual”.

2

Turn on the unit, the TV and the BD/DVD

player.

3

Use the TV remote control to change the

TV input to video from the unit.

The connections are complete. Proceed to the next

page to optimize the speaker settings.

• By connecting a TV to the unit with an HDMI cable, you can

configure the unit’s settings with the menu displayed on the TV. In

addition, you can select the on-screen menu language from English

(default), French, German, Spanish, Russian and Chinese. For

details, refer to “Owner’s Manual”. In this guide, illustrations of

English menu screens are used as examples.

Before connecting the power cable (General model only)

Make sure you set the switch position of

VOLTAGE SELECTOR according to your local voltage.

Voltages are AC 110-120/220-240 V, 50/60 Hz.

RX-V473_573_esg_C.fm Page 5 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

6 En

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

Preparing for YPAO

5

Optimizing the speaker settings automatically (YPAO)

• During the measuring process, test tones are output at high volume. Ensure that

the test tones do not frighten small children. Also, refrain from using this function at

night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

1

Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears.

• To cancel the operation, disconnect the YPAO microphone, or

use the cursor keys to select “Exit” and press ENTER, before

starting the measurement.

2

To start the measurement, press SETUP.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

Auto Setup

Start

Exit

Press SETUP key

to Start

Power Amp Assign

Basic

VOL.

SW

L

SL

C

SR

R

[SETUP]:Start

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / +10.0 dB

VOL.

SW

L

SL

C

SR

R

Finished

SCENE

RETURN

VOLUME

ENHANCER

DIRECT

HDMI

AV

FM

INFO

MEMORY

AM

PRESET

MOVIE MUSIC

BD

DV

D

MUTE

ENTER

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

OPTION

SETUP

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

9 0

10

ENT

56 87

12

34

MODE

TV

NET

RADIO

TUNER

1 2

3

NET

USB

V-AUX

6

A

B

ZONE

5

4

1 2 3 4

SLEEP

AUDIO

SC

EN

E

RETURN

V

O

LUME

E

NHANCE

R

D

IREC

T

HDMI

AV

FM

I

NF

O

M

EM

O

RY

AM

P

RESET

M

O

VIE

MUSI

C

BD

DV

D

M

UT

E

TV

V

O

L

TV

C

H

T

O

P

MEN

U

POP-U

P

MEN

U

DISPL

AY

SOU

R

CE

R

E

C

EIVER

CO

DE

S

ET

O

PTI

O

N

TUNING

S

TRAI

GH

T

S

UR

.

D

E

CO

D

E

INP

U

T

MUTE

9

0

10

EN

T

6

5

8

7

1

2

3

4

MOD

E

TV

NET

RADI

O

TUNE

R

1

2

3

NE

T

US

B

V-AU

X

6

A

B

Z

O

NE

5

4

1

2

3

4

S

LEE

P

AUDI

O

The unit (front)

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

YPAO microphone

Listening position

Ear height

Cursor keys

ENTER

Turn on the subwoofer and set

the volume to half. If the

crossover frequency is

adjustable, set it to maximum.

SETUP

RX-V473_573_esg_C.fm Page 6 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

En 7

• If any error message (such as E-1) or warning message (such

as W-2) appears, see “Error messages” or “Warning

messages” in “Owner’s Manual”.

• If the warning message “W-1:Out of Phase” appears, see “If

“W-1:Out of Phase” appears”.

3

Use the cursor keys (e/r) to select

“SAVE” (Save) and press ENTER.

4

Disconnect the YPAO microphone from the

unit.

This completes optimization of the speaker settings.

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

a Check for the blinking of the front display’s indicator to

identify the problem speaker.

b Check the cable connections (+/-) of the problem

speaker.

If the speaker is connected correctly:

You can save the current settings.

Proceed to step 3.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable, and then

try YPAO measurement again.

• The YPAO microphone is sensitive to heat, so should not be

placed anywhere where it could be exposed to direct sunlight or

high temperatures (such as on top of AV equipment).

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / +10.0 dB

SAVE

VOL.

SW

L

SL

C

SR

R

>SaveCancel

If “W-1:Out of Phase” appears

Warning

message

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / +10.0 dB

W-1:Out of Phase

VOL.

SW

L

SL

C

SR

R

W-1:PHASE

Problem speaker (blinks)

RX-V473_573_esg_C.fm Page 7 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

8 En

Now let’s play back a BD/DVD.

We recommend playing back multichannel audio

(5.1-channel or more) to feel surround sound produced

by the unit.

1

Press HDMI 1 to select “HDMI 1” as the

input source.

2

Start playback on the BD/DVD player.

3

Press STRAIGHT repeatedly to select

“STRAIGHT”.

• When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly (without

sound field processing).

• (RX-V573 only)

If you play back 5.1-channel audio on the 7.1-channel system,

no sounds will be heard from the surround back speakers.

4

Press VOLUME to adjust the volume.

This completes the basic setup procedure.

Sound is only being output from the front speakers

during multichannel audio playback

Check the digital audio output setting on the BD/DVD

player.

It may be set to 2-channel output (such as PCM).

No sound is coming from a specific speaker

See “Troubleshooting” in “Owner’s Manual”.

6 Playing back a BD/DVD

SCENE

RETURN

VOLUME

ENHANCER

DIRECT

HDMI

AV

FM

INFO

MEMORY

AM

PRESET

MOVIE MUSIC

BD

DV

D

MUTE

ENTER

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

OPTION

SETUP

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

9 0

10

ENT

56 87

12

34

MODE

TV

NET

RADIO

TUNER

1 2

3

NET

USB

V-AUX

6

A

B

ZONE

5

4

1 2 3 4

SLEEP

AUDIO

SC

EN

E

R

ETURN

E

NHANCE

R

D

IREC

T

HDMI

AV

FM

I

NF

O

M

EM

O

RY

AM

P

RESET

M

O

VIE

MUSI

C

BD

DV

D

M

UT

E

ENTER

TV

V

O

L

TV

C

H

T

O

P

MEN

U

POP-U

P

MEN

U

D

I

S

PL

AY

SOU

R

CE

R

E

C

EIVER

CO

DE

S

ET

O

PTI

O

N

S

ETUP

TUNING

S

UR

.

D

E

CO

D

E

INP

U

T

MUTE

9

0

10

EN

T

6

5

8

7

1

2

3

4

MOD

E

TV

NET

RADI

O

TUNE

R

1

2

3

NE

T

US

B

V-AU

X

6

A

B

Z

O

NE

5

4

2

3

4

S

LEE

P

AUDI

O

HDMI 1

STRAIGHT

VOLUME

If surround sound is not working

SW

C

L

SL SR

R

HDMI1

VOL.

SW

C

L

SL SR

R

VOL.

STRAIGHT

SW

C

L

SL SR

R

Volume -30.0dB

VOL.

Many more features!

The unit has various other functions.

Please refer to “Owner’s Manual” on the supplied

CD-ROM to help you get the most out of the unit.

Connecting other playback

devices

Connect audio devices (such as CD player),

game consoles, camcorders, and many others.

Selecting the sound mode

Select the desired sound program (CINEMA

DSP) or surround decoder suitable for movies,

music, games, sports programs, and other uses.

Playing back from iPod

By using a USB cable supplied with iPod, you

can enjoy iPod music on the unit.

■

Listening to FM/AM radio

■ Playing back music stored on

a USB storage device

■

Playing back the network

contents

■

Selecting the input source and

favorite settings at once

For more information, see “What you can do

with the unit”.

RX-V473_573_esg_C.fm Page 8 Monday, January 23, 2012 2:44 PM

Black process 45.0° 240.0 LPI

Page is loading ...

4 Sv

3

Anslut surroundhögtalarna (4/5) till

kontakterna som är märkta SURROUND BACK

(//\).

4

Anslut subwoofern (9) till SUBWOOFER-

uttaget.

Anslut de bakre surroundhögtalarna (6/7)

till SURROUND BACK (//\)-kontakterna.

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

Receivern (baksida)

FRONT CENTER SURROUND

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

12

3

45

9

Ljudstiftkabel

Receivern (baksida)

För 7.1-kanalsystem (gäller endast RX-V573)

FRONT CENTER SURROUND

SINGLE

SURROUND BACK/BI AMP

/ZONE B

OR OUT

P

B

Y

SUBWOOFER

SPEAKERS

1

67

2

3

45

9

Receivern (baksida)

RX-V473_573_esg_G.fm Page 4 Wednesday, February 8, 2012 2:31 PM

Page is loading ...

2 It2 It

Posizionare i diffusori nella stanza utilizzando il seguente schema come riferimento.

Per ulteriori informazioni su altri sistemi di diffusori, consultare il "Manuale di istruzioni".

1 Diffusore anteriore (S)

2 Diffusore anteriore (D)

3 Diffusore centrale

4 Diffusore surround (S)

5 Diffusore surround (D)

6 Diffusore posteriore surround (S)

7 Diffusore posteriore surround (D)

9 Subwoofer

2 Posizionamento dei diffusori

Sistema a 5.1 canali

12

39

45

da 10° a 30°da 10° a 30°

Sistema a 7.1 canali

(solo per il modello RX-V573)

45

1

2

39

67

30 cm o più

da 10° a 30° da 10° a 30°

RX-V473_573_esg_G.fm Page 2 Friday, February 3, 2012 5:05 PM

Page is loading ...

RX-V473_573_esg_G_cover4.fm Page 2 Tuesday, January 10, 2012 3:46 PM

Yamaha RX-V573 Owner's manual

This manual is also suitable for

Yamaha RX-V573 Owner's manual

in other languages

Related papers

Other documents