Unbranded 82392055936 Installation guide

Unbranded
Brand
Unbranded
Model
82392055936
Category
Floodlights
Type
Installation guide
9
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Attaching the Fan Blades and Brackets
Assembly - Attaching the Light Kit Fitter Assembly
Attaching the blades to the blade
brackets
Attaching the light kit tter assembly
Fastening the blade assemblies to
the motor
Installing the glass shades and
bulbs
□ Remove the three screws on the black bracket below the fan-
motor assembly (C).
□ Connect the wires from the light kit tter assembly (F) to the
wires from the black bracket below the fan-motor assembly
(C) by connecting the molded adaptor plugs together.
□ Carefully tuck all wires and splices in the switch cup.
□ Position the switch cup of the light kit tter assembly (F) on
the black bracket below the fan-motor assembly (C) and align
the three holes in the black bracket.
□ Re-install the three screws removed at the beginning of this
step to secure the light kit tter assembly (F).
□ Insert the glass shade (G) into the glass holder by carefully
squeezing the steel tensioners on the light xture socket
together.
□ Gently slide the glass shade (G) over the steel tensioners.
Make sure the glass shade (G) is fully inserted into the socket
for a secure t. Repeat these instructions for the remaining
glass shades.
□ With the power off, insert the light bulbs (H) into the light
sockets, Max. 60W.
□ Attach the pull chains extensions (DD) to the light pull chain
and the fan pull chain.
□ Fasten the blade assembly to the fan-motor assembly (C) by
inserting the alignment post into the slot on the bottom of the
motor and tightening the blade bracket (D) screws. The blade
bracket screws are pre-installed into the blade bracket (D).
□ Repeat this step for the remaining blade assemblies.
5
7
6
8
D
C
E
D
E
AA
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
F
C
CAUTION: Make sure the power is off before attaching or
removing the glass shades.
WARNING: Allow the glass shades to cool completely before
removing.
G
F
H
DD
NOTE: Your fan blades are reversible. Select the blade
side nish which best accentuates your decor.
Page is loading ...
  • Page 1 1
  • Page 2 2

Unbranded 82392055936 Installation guide

Unbranded
Brand
Unbranded
Model
82392055936
Category
Floodlights
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents