HQ IR-EGGS3 Specification

IR-EGGS3
HQ
Brand
HQ
Model
IR-EGGS3
Category
Remote controls
Type
Specification

HQ IR-EGGS3 is an infrared extender system that enables users to control audio-video equipment that is located in a closed cabinet or behind a wall. It consists of a front sensor that is placed in front of the equipment and a receiver that is placed on top of the cabinet or wall. The system supports up to 3 devices and has a range of up to 5 meters with a 15-degree angle.

HQ IR-EGGS3 is an infrared extender system that enables users to control audio-video equipment that is located in a closed cabinet or behind a wall. It consists of a front sensor that is placed in front of the equipment and a receiver that is placed on top of the cabinet or wall. The system supports up to 3 devices and has a range of up to 5 meters with a 15-degree angle.

IR-EGGS3
INFRARED EXTENDER
Packaging contents:
1x Cable
1x Receiver
1x AC/DC adapter
Front receiver: Back receiver:
With the IR-EGGS3 it’s possible to control
equipment in a closed closet.
Place the sensor on the front of e.g. DVD, VCR,
SAT receiver, Set Top Box or Home Cinema
receiver.
Place the receiver vertical on top of the closet
Distance not less than 30cm and not more
than 5m. Angle not more than 15°.
Specifications:
Operating voltage: 120VAC, 60Hz / 230/240 VAC, 50Hz/ 12VDC, 100mA(min)
Power Consumption: 1 Watts (max)
Effective operating range: 5M (min)
Angle: 15°
Infrared Receiver Section: 38 KHz tuning frequency
Sensors: 3
Cable length: 2m
Warning:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician if service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
product to water of moisture.
Warranty:
No guarantee or liability can be accepted for any changes and modifications
of the product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without a notice.
ENGLISH
MANUAL
Infrared
sensor
Power IN
12VDC
Infrared
Cable connection
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

HQ IR-EGGS3 Specification

IR-EGGS3
HQ
Brand
HQ
Model
IR-EGGS3
Category
Remote controls
Type
Specification

HQ IR-EGGS3 is an infrared extender system that enables users to control audio-video equipment that is located in a closed cabinet or behind a wall. It consists of a front sensor that is placed in front of the equipment and a receiver that is placed on top of the cabinet or wall. The system supports up to 3 devices and has a range of up to 5 meters with a 15-degree angle.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents