The box pro A 8 LA Flying Frame is a component intended exclusively for use in combination with "the box A 8 LA Line Array" components.
It can be used in flying operation and also, turned by 180° upside down, as a framework for positioning of a device on the floor.
The flying frame has a maximum load capacity of 680 kg at an angle of 0° and a safety factor of 10:1 for up to 12 devices.
It has bores for locking pins at the front and rear sides of the Line Array device, as well as a thread (M10) for attaching standard screw feet for stack mounting.
The box pro A 8 LA Flying Frame is a component intended exclusively for use in combination with "the box A 8 LA Line Array" components.
It can be used in flying operation and also, turned by 180° upside down, as a framework for positioning of a device on the floor.
The flying frame has a maximum load capacity of 680 kg at an angle of 0° and a safety factor of 10:1 for up to 12 devices.
It has bores for locking pins at the front and rear sides of the Line Array device, as well as a thread (M10) for attaching standard screw feet for stack mounting.
The box pro A 8 LA Flying Frame is a component intended exclusively for use in combination with "the box A 8 LA Line Array" components.
It can be used in flying operation and also, turned by 180° upside down, as a framework for positioning of a device on the floor.
The flying frame has a maximum load capacity of 680 kg at an angle of 0° and a safety factor of 10:1 for up to 12 devices.
It has bores for locking pins at the front and rear sides of the Line Array device, as well as a thread (M10) for attaching standard screw feet for stack mounting.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI