LG M1203R Owner's manual

Type
Owner's manual

This manual is also suitable for

website http://www.lgservice.com
e-mail http://www.lges_ervice.co_techsup.html
E,'IT_O
I_ UL
Please read the operating instructions and safety precautions
carefully and thoroughly before installing and operating your
room air conditioner.
UELD°U/ILISATIO
CLD TJSE F
Veuillez lire a_entivement et en entier ce guide d'utilisation
et les mesures de securite cidncluses avant de proceder
I1nstallation et au fonctionnement de votre climatiseur.
A
OI0_IADOP,SEAIREDE
L ELP OPI
Pot favor lea las instrucciones de operaci6n y las precauciones
de, seguridad cuidadosa y totalmente antes de instalar y operar
su acondicionador de aire de ventana.
MODEL,MODELE,MODELO:M1203R,KG1200R,WG1200R
FEATURES ........................................................................................................................................ 2
SAFETY PRECAUTIONS ..................................................................................................................... 3
OPERATING ....................................................................................................................................... 5
FU NCTION ........................................................................................................................................ 5
REMOTE CONTROLLER ............................................................................................................. 6
VENTILATION ....................................................................................................................................... 7
TO CONTROL AIR DIRECTION ..................................................................................................... 7
HOW TO SECURE THE DRAIN PIPE ............................................................................................. 7
AIR FILTER CLEANING ...................................................................................................................... 8
HOW TO USE THE REVERSIBLE INLET GRILLE ............................................................................. 8
ELECTRICAL DATA .................................................................................................................................... 9
BEFORE CALUNG FOR SERVICE ...................................................................................................... 9
INSTALLATION INSTRUCTIONS .............................................................................................................. 10
ELECTR ICAL SAFETY ................................................................................................................................... 14
1. CABINET
2. HORIZONTAL AIR DEFLECTOR
(VERTICAL LOUVER)
3. VERTICAL AIR DEFLECTOR
(HORIZONTAL LOUVER)
4. AiR DISCHARGE
5. FRONT GRILLE
6. AMR INTAKE
(INLET GRILLE)
7. AIR FILTER
8. CONTROL BOARD
9. PC_¢¢ER CORD
10. EVAPORATO R
11, CONDENSER
12. COMPRESSOR
13. BASE PAN
14. BRACE
15, REMOTE CONTROLLER
_2_
Topreventinjurytotheuserorotherpeopbandpropertydamagethefoilowinginstructionsmustbefol-
lowed.
m incorrect operation due to ignoring of instruction will cause harm or damage. The seriousness is classified
bY the following indications.
Otherwise, itwill cause electric
shock or fire due to heat genera-
tion.
It will cause electric shock or fire
due to heat generation,
, _twiillcause electricshockor fire.
Ifthe_er cordisdamaged,itmust
be[eplacedbythemanufadureror
anauthorizedservicecenteror a
similarlyqualified_rson in orderto
avdda hazard.
.it will cause electric shock or fire
due to heat generation.
, It will cause el_tric shock,
. This could damage your hea_th.
-3-
c Io.l
_tmay cause an iniury. Water may enter the unit
This could iniure the pets or
p_ants.
and degrade the insula-
tion. Itmay cause an
electric shock,
ft may cause a fire or deformation
of the cabinet
Anoxygen shortage may
o_ur
°Since the fan rotates at
high s_ed during oper-
ation, it may cause an
injury.
Do not usethis air conditioner to
preserve precision devices, hod,
pets, plants, and art obiects.
itmay cause deterioration of quaF
ity,etc.
Itmay cause imperfect combus-
tion,
, It may cause an electric slhock.
U_ caution when handJing the
case. Grip it firmJyand do not allow
it to s_[pwhile holding it.
, Useheavy giovestohaL_dlethe case if
necessary.
DONOT
allowthe
caseto slide
-4-
CAUTION
When the air conditioner has been performing its cooling operation and is tu;rned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
FUNCTION
POWER BUTTON
Toturn the air conditioner ON, push me button. Toturn the air conditioner OFF,push the button again.
This button takes priority over any other buttons.
OPERATION r/lODE SELECTION BUTTON
Every time you push this button, it will toggle COOL, FAN and DRY.
ON/OFF TIMER BUTTON
Everytime you push this bu_on, timer is set as follows.(1 Hour _ 2Hours _ 3Hours --) 4Hours
5Hours _ 6Hours _ 7Hours _ 8Hours _ 9Hours _ 10Hours _ 11Hours --) 12Hours _ Cancel)
FAN SPEED SELECTOR
Everytime you push this button, it is set as follows. (Hi[ F3] -) Low[ F l] -3' Med[ F2] -') Hi[F 3]....)
ROOM TEMPERATURE SETTING BUTTON
This button can automatically _ntrol the temperature of the room.
The temperature can be set within a range of 60°F to 86°F by 1°F.
Select the lower number for lower temperature of the room.
ENERGY SAVER: (It is operated by only remote controller.)
The fan stops when the _mpressor sto_ cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if _oling is
need_.
REMOCON SIGNAL RECEIVER
-5-
REMOTE CONTROLLER
Pir_aution: The Remote Controller will not function propedy if strong light strikes the sensor window
of the air conditioner or if there are obstacles between the Remote Controller and the air
conditioner,
, To turn theair conditior.erON, pushtheI_Jtton.Toturn the air conditioner OFF,pushthe bu_onwain.
, Th_ bu_ontakes priorityov_ any otherbu_ons.
Whenyou first turn iton, theairconditioner [son the Highccolmod_ andthe temp.at 72°F(22°0).
TEMPERATURE SE_ING
• This button can automatically control the tem_rature e{ the room.
The temperature can be set within a range of _°F to 86°F by 1°F,(16°C to 30'C by 1°C)
Select the lower number for lower temperature o[ the room.
FAN SPEED
EverytimeyoupushthisbuttonitMsset asfollows,{High(F3)-*Low(F1)-_Med(F2)-*High(F3).},
ON/OFF TIMER
- STOPPING OPERATION
Eve_i_ you pushth_ button, whenthe airconditioner is®eratJng,timer isset asfol_ows,
(1Hour-* 2Hours -*3Hours-* 4Hour-* 5Hours-4-6Hours---7Hours_8Hours -*9Hours-*
lOHours--,11Hours-* 12Hours_ Cancel)
The Setting Tem_rature will _ rai_d by2_'F(1°C)30rain.later andby2°F(1°C) a_er another 30 min.
- STARTINGOPERATION
Everyti_ you push th_ button,whenthe air cond_ionerisnot_erating, tier isset as Io[Iow.
(1Hour-* 2Hours -_3Hours_*4Hours_*5Hours_-6Hours _*7Hours- 8Hours_.9Hours_.
lOHours _.11Hours --.12Hours---CanceE}
ENERGY SAVER
• The fan sto_ when the compressor stops cooling_
Al@roximateiy every 3 minutes the fan will turn on and check the room air to determine if
cooling is needed_
MODE
Eve_time you push this bu_ton,it wil_toggle between COOL, FAN and DRY.
HOW TO INSERT BATTERIES
1. Remove the cover from the back of the remote controller.
2, Insert two batteries,
Be sure that the (+) and (-) directions are correct.
Be sure that both batteries are new,
3. Re-a_ach the cover,
Do not use rechargeable bat=
teries. Such batteries differ
from standard dry ceils in
shape, dimensions, and per-
folrmance.
Remove the batteries from
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
-6-
TheventilationlevermustbeCLOSEpositioninorderto maintainthebestcoolingconditions.
Whenfreshairisnecessaryintheroom,settheventilationlevertotheOPENposition.
Thedamperisopenedandroomairis exhausted.
Part
CLOSE|VENT|OPEN
NOTE: Before using the ventilation feature, make a ventilation kit
First, pull down part @ to horizontal line with part @.
TO CONTROL AIR DIRECTION
The direction of air can be controlted wherever you want to cool by adjusting the horizontal louver and
the vertical iouven
HORIZONTAL AIR-DIRECTION CONTROL
The horizontal air direction is adjusted by
moving the vertical louver right or left.
VERTICAL AIR-DIRECTION CONTROL
The vertical air direction is adjusted by rotating
the horizontal louver forward or backward.
HOW TO SECURE THE DRAIN PIPE
In humid weather, excess water may cause the
BASE PAN to ovediow. To drain the water,
remove the DRAIN CAP and secure the DRAIN
PIPE to the rear hoie of the BASE PAN
Drain pipe
Drain cap
AIR FILTER CLEANING
The air filter should be checked at least twice a month to see if cleaning is necessary. Trapped
particles in the filter will build up and block the airflow. This reduces the cooling capacity and also
_uses an accumulation of frost on the cooling coils.
1. Open the inlet grille upward by pulling out the bottom of the inlet grille
2, Remove the air filter from the front grille assembly by pulling the air filter up slightly,
3. Wash the filter using lukewarm water below 40_(104_).
4, Gently shake the excess water from the filter completely. Repla_ the filter.
HOW TO USE THE REVERSIBLE INLET GRILLE
The grille is designed to caean the filter both upward and downward.
®
(a) (b)
A. Before attaching the front grille to the cabinet, if you want to pull out the fil-
ter upward;
1. Open the inlet grille slightly (a)
2. Turn inside out the front grille (a),
3. Disassemble the inlet grille from the front grille with separating the hinged part by inserting a
straight type screw-driver tip (b).
4. Then, rotate the inlet grille 180 degrees and insert the hooks into bottom holes of the front grille.
5. insert the filter and attach the front grille to the cabinet.
B. If you want to pull out the filter downward;
The griIle is already designed that way.
-8-
ELECTRICAL DATA
Line Cord Plug
Do not, under any
circumstances, cut or
remove the grounding prong
from the plug.
Power supply cord with
3-prong grounding plug
Use Wall Receptacle
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC
Power Supply
Use 15 AMP, time
delay fuse or circuit
breaker.
BEFORE CALLING FOR SERVICE
Air Conditioner will not operate.
1. Is the air conditioner plugged into the outlet?
2. Is the fuse or breaker good?
3. Is the voltage unusually high or low?
Air from the unit does not feel cold enough on the cooling setting.
1. Is the setting temperature correct?
2. Is the air filter clogged with dust?
3. Is the air flow from the outside(condensers) obstructed?
Leave a clearance of over 1 meter(3.28 feet) between the back of the air conditioner and the wall or
fence behind it.
4. Are the door or windows open, or is there any source of heat in the room?
NOTE: If it is difficult to find out the cause of the trouble, be sure to turn the air conditioner off and
contact the dealer.
OFF-SEASON MAINTENANCE
1. Clean the air filter and re-install.
2. Turn the power off and disconnect the power plug from the wall receptacle.
-9-
I
SELECT THE BEST LOCATION
1. To prevent vibration and noise, make sure the
unit is installed securely and firmly
2. Install the unit where the sunlight does not
shine directly on tlhe unit.
3. The outside of the _binet must extend
outward for at least 12" and there should be
no obstacles, such as a fence or wall, within
20" from the back of the cabinet because it will
prevent heat radiation of the condenser.
Restriction of outside air will greatly reduce
the cooling efficiency of the air conditioner.
CAUTION: All side louvers of the cabinet must
remain exposed to the outside of the structure.
WINDOW REQUIREMENTS
1, This unit is designed for installation in
standard double hung windows with actual
opening widths from 27" to 39",
The top and bottom window sash must open
sufficiently to allow a clear vertical opening of
16" from the bosom of the upper sash to the
window stool
INSTALLATION KITS CONTENTS
2. Install the unit a little slanted so the back is
slightly lower than the front(about i/2").
This will force condensed water to flow to the
outside,
3 Install the unit with the bottom about 30"_60"
above the floor level,
Fence
Cooled air
HeM
radiation
..............................................................
.....................Ov_20_.......................
%
Interior wail
235/8," rain
(Without frame curtain)
1,/2"to 11/4"
Exterior
NO, NAME OF PARTS,
1 FRAME CURTAIN 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5 SCREW(TYPE A) 16
6 SCREW(TYPE B) 3
7 SCREW(TYPE C) 5
8 FOAM-STRIP 1
9 FOAM-PE 1
10 UPPER GUIDE 1
11 FOAM-PE 1
12 FRAME GUIDE 2
13 WINDOW LOCKING BRACKET 1
_10-
SUGGESTED TOOL REQUIREMENTS
I SCREWDRIVER(+, -), RULLER, KNIFE, HAMMER, PENCIL,
LEVEL
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet
at both sides and at the back,_
2, Slide the unit from the cabinet by gripping the
base pan handle and pulling forward while
bracing the cabinet.
3. Remove EPS Material.
4. Cut the window sash seal to the proper length,
Peel off the backing and attach the foam-pe @
to the underside of the window sash,
5, Remove the backing from the top upper guide
Foam PE @ and a_ach it to the bottom of the
upper guide @,
6. Attach the upper guide onto the top of: the
cabinet with 3 type A screws,
7, insert the frame guides @ into the bottom of
the cabinet.
8. insert the Frame Curtain _') into the upper
guide @ and frame guides @.
9. Fasten the, curtains to the unit with 4 Type A
screws,
CABINET INSTALLATION
1. Open the window. Mark a line on center of the
window stool(or desired air conditioner
location).
Carefully place the cabinet on the window
stool and align the center mark on the bottom
front with the center line marked in the
window stool.
2. Pull the bottom window sash down behind the
upper guide until it meets.
"i Do not pull the window sash down so tiglhtly
that the movement of Frame Curtain is
restricted.
(Type
Shipping screws
EPS Matedal
(Type A)
Upper Guide
_Window stool
FrontAng_,e Fig. 1
Foam-peQ
'_ Fig. 2
-11 -
3.Looselyassemblethesillsupportusingthe
partsinFig.3.
4.Selectthepositionthatwillplacethesill
supportneartheoutermostpointonsill
(SeeFig.4)
NOTE: Be careful when you install the cabinet
(frame guides @ are broken so easily).
5. Attach the sill support to the cabinet track hole
in relation to the seiected position using
2 Type A screws in each support(See Fig. 4).
6 The cabinet should be installed with a very
slight tilt(about 1/2") downward toward the
outside (See Fig. 5),
Adjust the bolt and the nut of sill support for
baJancing the cabinet.
7, Attach the cabinet to the window stool by
driving the screws (_(Type B: Length sixteen
millimeters and below.) through the front angle
into window stool.
8. Pull each Frame curtain fully to each window
sash track, and repeat step 2.
9. Attach each Frame curtain the window sash
using screws ®(Type C).
(See Fig, 6)
Frame Guide @
IND_
Screw(Type A) @
io ....
a r _i
Fig, 4
Screw(Type B)
Sill support
Sil_ suppod_
FrontAngle
_rew(Type B)
Fig. 5
Fig, 6
_12-
10.Slidetheunitintothecabinet.(SeeFig.7)
CAUTION:Forsecuritypurpose,reinstalU
screws(_peA)atcabinet'ssides.
11.Cutthefoam-strip® totheproper!ength
andinsertbetweentheupperwindowsash
andthelowerwindowsash.
(SeeFig.8)
12,Attachthewindowlockingbracket@witha
typeCscrew.(SeeFig 9)
13.Attachthefrontgrilletothecabinetbyinsert-
ingthetabsonthegrilleintothetabsonthe
frontofthecabinet,Pushthegrilleinunti!it
snapsintoplace.(SeeFig.10)
14.Liftthein!etgrilleandsecureitwithatypeA
screwthroughthefrontgrille.(SeeFig,11)
Screw(Ty_ A)
......Power cord
/
Screw(Type A) Fig. 7
Foam-StripQ
Fig, 8
locking bracket@
Fig. 9
Fig, 10 Fig, 11
Fig. 12
_13-
ELECTRICAL SAFETY
IMPORTANT
(PLEASE READ CAREFULLY)
FOR THE USER'S PERSONAL
SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED
Because of potential safety hazards, we strongly
discourage the use of an adapter plug. However,
if you wish to use an adapter, a TEMPORARY
CONNECTION may be made. Use UL-listed
adapter, available from most local hardware
store(Fig. 14). The large slot in the adapter must
be aligned with the large slot in the receptacle to
assure a proper polarity connection.
The power cord of this appliance is equipped
with a three-prong(grounding) plug. Use this with
a standard three-slot(grounding) wall power
outlet(Fig. 13) to minimize the hazard of electric
shock. The customer should have the wall
receptacle and circuit checked by a qualified
electrician to make sure the receptacle is
properly grounded.
PREFERREDMETHOD
Fig. 13
DO NOT CUT OR REMOVE THE
THIRD(GROUND) PRONG FROM THE
POWER PLUG.
A. SITUATIONS WHERE THE APPLIANCE
WILL BE DISCONNECTED ONLY
OCCASIONALLY:
TEMPORARYMETHOD _ Fig. 14
Adapterplug-_ _1
I'_ Metalscrew
J Receptacle cover
CAUTION: Attaching the adapter ground terminal
to the wall receptacle cover screw does not
ground the appliance unless the cover screw is
metal, and not insulated, and the wall receptacle
is grounded through the house wiring.
The customer should have the circuit checked by
a qualified electrician to make sure the
receptacle is properly grounded.
Disconnect the power cord from the adapter,
using one hand on each. Otherwise, the adapter
ground terminal might break. DO NOT USE the
appliance with a broken adapter plug.
B. SITUATIONS WHERE THE APPLIANCE
WILL BE DISCONNECTED OFTEN.
Do not use an adapter plug in these situations.
Unplugging the power cord frequently can lead to
an eventual breakage of the ground terminal.
The wall power outlet should be replaced by a
three-slot(grounding) outlet instead.
USE OF EXTENSION CORDS
Because of potential safety hazards, we strongly
discourage the use of an extension cord.
However, if you wish to use an extension cord,
use a CSA certified/UL-listed 3-wire(grounding)
extension cord, rated 15A, 125V.
-14-
CARACTERISTIQUES...................................................................................................................15
MESURESDESECURITE...............................................................................................................16
FONCTIONNEMENT........................................................................................................................18
LESCOMMANDES.....................................................................................................................18
TELECOMMANDE.........................................................................................................................19
LAVENTILATION.................................................................................................................................20
AJUSTERLADIRECTIOND'AIR...................................................................................................20
COMMENTUTILISERLETUYAUD'EVACUATION.......................................................................20
NETTOYAGEDUFILTREAAIR..................................................................................................21
COMMENTUTILISERLAGRILLED'ADMISSlONREVERSIBLE..............................................21
DONNEESSURL'ELECTRICITE....................................................................................................22
AVANTDEFAIREAPPELA UNTECHNIClEN..................................................................................22
INSTRUCTIONSPOURD'INSTALLATION..................................................................................23
MESURESDESECURITEELECTRIQUES....................................................................................27
t
1 BOTTLER
2_ DEFLECTEUR D'AIR HORIZONTAL
(VOLET VERTtCAL)
3. DEFLECTEUR D'AIR VERTICAL
(VOLET HORIZONTAL)
4. DECHARGE D'AIR
5. GRILLAGE FRONTAL
6. PRISE D'ADMISSION D'AIR
(GRILLAGE DE LA PRISE)
7. FILTRE A AIR
8. PANNEAU DES COMMANDES
9. FUL D'AMMENTATION
10. EVAPORATEUR
11. CONDENSEUR
12, COMPRESSEUR
13, PLATEAU DE LA BASE
14, ATTACHE
15. TELECOMMANDE
_15-
CARACTER iSTICAS ........................................................................................................................... 28
PRECAUCIONES IMPORTANTES DE SEGURIDAD ............................................................................. 29
OPERACION ............................................................................................................................................... 31
FUNCION ............................................................................................................................................ 31
CONTROL REMOTO ............................................................................................................................. 32
VENTILACION ...................................................................................................................................... 33
PARA CONTROLAR LA DIRECCl0N DEL AIRE ........................................................................... 33
COMO INSTALAR EL TUBO DE DESAAGOE ............................................................................ 33
LIMPIEZA DE FIWRO DE AIRE ...................................................................................................... 34
COMO USAR LA REJILLA DE ENTRADA REVERSIBLE ............................................................ 34
INFORMACION ELECTRICA ..................................................................................................................... 35
ANTES DE LLAMAR POR SERVlClO .................................................................................................... 35
INSTRUCCIONES DE INSTALACION ...................................................................................................... 36
SEGURIDAD ELECTRICA ...................................................................................................................... 40
f
1. GABiNETE
2. DEFLECTOR HORIZONTAL DE AIRE
(VENTANILLAS VERTICALES)
3 DEFLECTOR DE AIRE HORIZONTAL
(VENTANILLAS HORIZONTALES)
4. SALIDA DE AIRE
5. REJILLA FRONTAL
6. RECOLECTOR DE AIRE
(BANDEJA DE ENTRADA)
7. FfLTRO DE AfRE
8. PANEL DE CONTROL
9. CABLE DE CONEXION ELECTRICA
10. EVAPORADOR
11, CONDENSADOR
12. COMPRESOR
13. BANDEJA
14. SUSPENSORES
15, CONTROL REMOTO
28 -
Golds'far will repair or replace your product, at Goldstar's option, if i't proves 1"obe defective in material or
workmanship under normal use, during the warranty period set forth be_ow, effective from the date of origina_
consumer purchase of 'the product, This Imired warranty is good only 1"othe origina_ purchaser of the product and
effective only when used in the United States, including Alaska, Hawaii. and US Te_itories,
WARRANTY PERIOD:
Labor: I Year from the Date of Purchase
Pads: 1 Year from the Date of Purchase,
Com_es_sor: 5 Years from the Date of
Purchase,
HOW SERVICEIS HAND_D:
CaHI1-800-243-0C($0and choose the appropriate prompt,
Please have product type (Air ConditioneO, model number,
sefia_number, and ZIP/postal code ready,,
The terms of this warranty cover in.home se5_ice on the indicaled
mod_s
THIS WAR_F_ IS IN UEU OF ANY OTHER WARRANTIES, EXPRESSOR IMPUED, INCLUDING WITHOUT lIMITATION, ANY
WARRAN_ OF ME_HANTABILITY OR FITNESS_R A PARTICULARPURPOSE. TO THE E_NT ANY iMPliED WARRANTY IS
R'E_IRED BY LAW, IT ISLIMITED IN DURATION TO _E _PRESS WA_ANTY PERIOD A_VE. LG WILLNOT liA8_ FOR
ANY CONSEQUE_A_ INDIRECT, OR INClDE_AL DA_GES OF ANY KIND, INCLUDING LOSTREVENUESOR PROFITS,iN
CONNECTION WITH THE P_DUCT. SOME STA_S _ NOT ALLOW LIM_ATION ON HOW LONG AN IMPliED WA_A_
LASTSOR THEEXCLUSION OF INCIDENTAl. OR CONSEQUEt_AL DAMAGES, _ THEABOVE LIMITATIONS OR EXCLUSIONS.
_Y NOT APPLY'TOYOU.
THIS LIMITEDWA_AF_rY DOES NOT APPLYTO:
2_
Service trips to your home to deliver, pick up, and/or nstal! the prod_Jct, instruct, or replace house fuses or
correct widng, or correction of unauthorized repairs; and
Damages or operating problems lhat result from misuse, abuse, operatfon outside environmental
specifications or contrary to the requirements or precautions in the Operating Guide, accident, vermin,
fire, flood, improper installation, acts of God unauthor zed modification or a_teratiorb incorrect e/ecl'rical
current or voltage, or commercial use, or use for o,fher than intended purpose,
3. Tl-_rofofe, the cost of repair o_ replacement of such a _fective p_oduct shall be borne by the calumet.
CUSTOMER &_R°ACTIVE C:E_R NUMBERS:
To Prove Warra_ Coverage
To Obtain Nearest A_horiz_ _rvice Center ol Sales
Dealer, or to Obtain Prod_t, Customer, or _rvice
Ass_ance
Retain y_r _les Receipt to I_OVe _e of purchase.
A copy of your Sales Receipt must be submitted at
the time warranty se_ice is provided
Call 1-800-243-1]_0 (Monday ~ Friday. 7 AM _ 8 PM CT;
and Saturday, 8 AM ~ 5 PM CT) and choose the
appropriate prompt from the menu; or visit our website at
hflp:/ iwww.lgser¢ice.com,
P/No.: 3828A20329A Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

LG M1203R Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI