ASSEMBLY INSTRUCTIONS
Attach right arm (A) to the side of the rear seat and
back (D) by inserting a short bolt (Ea), through a metal
washer (Ec), through the bracket of rear seat and
back (D) and secure into right arm (A) for each hole.
See Fig. 1. Do not tighten completely. Repeat procedure
for the other side and then the left arm (B).
Securely tighten all bolts by using Allen wrench (Ed).
Your sling lounge is now ready for use.
Unfold the rear seat and back, and insert the front
seat (C) into the rear seat (D). Insert a long bolt (Eb)
through a metal washer (Ec), through the side rail of
the front seat (C) and secure into the rear seat (D).
See Fig. 2. Don’t tighten completely. Repeat procedure
for the other side.
1
2
3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
3
Fig. 2
Fig. 1
Ea
Ec
C
D
A
B
D
Ec
Eb
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
sears.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering