Strong SR-SHELF-FIXED-2U Owner's manual

Step 1 - Slide the shelf into the rack. Attach

the front shelf sides to the rack frame using

the rack-supplied hardware or any 10/32

screws.

Step 3 (Optional) - Attach the top

equipment brace(s) to the shelf sides

using screws provided.

Step 4 (Optional) - Attach the back-stop

brackets to the top of the shelf using the

screws provided.

Step 2 (Optional) - Attach the rear support

brackets to the rack frame using the

supplied washers and screws.

Lifetime Warranty

All Strong™ products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found

to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which

have been abused, modied or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a

designated service center with prior notication and an assigned return authorization number (RA).

Lifetime

SR-SHELF-FIXED

Installation Instructions

for Strong™ Fixed Rack Shelf

Parts Included:

(1) Shelf

(2) Rear Support Brackets

(2) Back-Stop Brackets

(1) Top Equipment Brace

(1) Screw Pack

141203_0100

This manual is also suitable for

Download PDF