2. Sea Eagle
  3. All-In-One Transformer Paddle

Sea Eagle All-In-One Transformer Paddle Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Sea Eagle All-In-One Transformer Paddle Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
All-In-One Transformer Paddle
Assembly Instructions
The All-In-One Transformer Paddle can be con gured as a double-bladed kayak paddle, SUP paddle or
Push-Pole and Stakeout Anchor. No tools needed, pieces button lock together.
Assembly Instructions
The All-In-One Transformer Paddle can be con gured as a double-bladed kayak paddle, SUP paddle or
Push-Pole and Stakeout Anchor. No tools needed, pieces button lock together.
Components:
Adjustable shaft section
Feathering shaft section with three holes
Right and Left Blade
2 - Drip Guards
Pointed end piece
Handle/Push piece
Shaft Sections: All Con gurations
The adjustable and feathering shaft sections are used for each con guration. Adjustable end mates into three hole
end of feathering shaft. Button will pop up in hole to lock together. These two pieces must be connected to each
other to assemble the Transformer Paddle properly.
Double-Ended Paddle Assembly
Connect adjustable shaft and short feathering shaft. The
adjustable end of the shaft goes in to the three hole end of
the Feathering Shaft.
Push the drip guards onto the blade shafts.
Connect the blades to the assembled shaft.
Connect adjustable shaft and short feathering shaft. The
adjustable end of the shaft goes in to the three hole end of
the Feathering Shaft.
Connect the T-Handle/Push bar section over the adjustable
shaft.
Connect pointed section to the feathering section.
Stand-Up Paddle, insert one blade instead of pointed
section.
Push-Pole and SUP Paddle
Push-Pole and SUP Paddle
Paddle can be adjusted in 2 inch increments.
800-748-8066 • SeaEagle.com
/