Page is loading ...
ILFORD GALERIE GRAPHIC Glossy Backlit Display Film is a coated
nanoporous fi lm specifi cally for use in light boxes and other back-lit
applications. It is compatible with aqueous pigment inks.
PRODUCT INFORMATION
The high opacity also gives the image excellent contrast when the image is
not back lit, making it suitable for day and night applications.
FEATURES
High colour saturation
Homogeneous colour
Fast drying
High image quality
Compatible with pigment inks
For use in lightboxes
LAMINATION
For best results and longer exhibition life we strongly recommend that you
laminate the image side of prints.
Touch dry straight from the printer it is recommended that prints are left to
dry fully before laminating. As with other media, 24 hours dry time should
be allowed for consistent results.
PRINTER & INK COMPATIBILITY
Designed for use with most wide format inkjet printer systems using
aqueous pigment inks from major manufacturers.
AVAILABILITY
GALERIE GRAPHIC Glossy Backlit Display Film is available in selected roll
widths, up to 44” (111.8cm).
PHYSICAL PROPERTIES (TARGET VALUES)
Weight 180gsm
Caliper 150micron (6mil)
Tint (CIE L*a*b*) 94.5, 0.5, –1.0
Gloss (20°) 40%
ENVIRONMENTAL CONDITIONS
Operating 15ºC-25ºC (59°F-77°F), 30-70% RH non-condensing
Note: All trademarks are the property of their respective companies.
Specifi cations subject to change without notice.
•
•
•
•
•
•
GRAPHIC
GLOSSY BACKLIT DISPLAY FILM
IGXGTF6 (180gsm)
IGXGTF6 • v2.0 • provisional
/