Kärcher 2.645-235.0 Datasheet
- Category
- Water hose fittings
- Type
- Datasheet
Kärcher Rain System®
Sealing Collar
Sealing collars can be attached at any point on the Kärcher Rain System® hose. They can be easily installed
and reliably seal collar holes that are no longer required.
Equipment:
•
Sealing collars 5 piece(s)
Order no.: 2.645-235.0
Technical data
Dimensions (L x W x H) (mm) 80x24x21.5
Weight (kg) 0.01
Diameter -
Hose length -
Max. pressure (bar) 4
Details
Description
Sealing collars are part of the "Kärcher Rain System®". They can be quickly attached anywhere on the
Kärcher Rain System® hose and are used to reliably seal collar holes that are no longer required. The
rubberised surface and the integrated pin on the inside make this possible. Installation is fast, easy and
does not require tools. The pin is stuck into the hole to be sealed and the collar is closed. This securely
seals the hose, which can then continue to be used without unnecessary waste of water. The highly
efficient Kärcher Rain System® watering system works with 4 bar pressure, features a 1/2" hose with drip
and spray collars and combines the advantages of micro-dripping and conventional watering. The
"Kärcher Rain System®" can be individually adapted to almost any garden and works perfectly with the
SensoTimer for need-based watering control.
Application
•
Garden watering
•
Flower beds, vegetable patches
•
Features & Benefits
Resealable collar
Collars can be flexibly attached and removed as required
Fixation on the Kärcher Rain System® hose
Flexible, precise mounting
Rubberised surface includes pin on the inside
Simple sealing of collar holes in the hose
Rubberised surface includes pin on the inside
Kärcher Rain System® hose can continue to be used efficiently
-
1
-
2
Kärcher 2.645-235.0 Datasheet
- Category
- Water hose fittings
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kärcher 2.645-239.0 Datasheet
-
-
-
-
-
-
-
-
-