Philips DLM4330/10 Datasheet

Category
Mobile phone cases
Type
Datasheet

Philips DLM4330/10 is a protective case designed for iPhone 4 and 4S. It provides a strong protection with a hard-shell polycarbonate case and non-slip silicone accents for improved grip. The wrap-around protection extends to the corners and the face of the device. Despite the protection features, the slim design still allows the device to fit easily into a pocket or a bag. The case also features convenient access to all controls and the dock connector, and covered buttons for push-through protection.

Philips DLM4330/10 is a protective case designed for iPhone 4 and 4S. It provides a strong protection with a hard-shell polycarbonate case and non-slip silicone accents for improved grip. The wrap-around protection extends to the corners and the face of the device. Despite the protection features, the slim design still allows the device to fit easily into a pocket or a bag. The case also features convenient access to all controls and the dock connector, and covered buttons for push-through protection.

Philips
Hard case with silicone
for iPhone 4, 4S
DLM4330
Protect your iPod in a hard-shell case
with non-slip rubberized accents
with non-slip rubberized accents
Strong protection
Hard-shell polycarbonate case for strong protection
Silicone accents improve your grip
Wrap-around protection for the corners and face
Quick and easy protection in a snap
Protection on the go
Slim design fits easily into your pocket
Convenient access
Access to all controls and dock connector
Covered buttons for push-through protection
Screen protection
Crystal-clear film for invisible screen protection
Issue date 2011-12-13
Version: 1.1.5
12 NC: 8670 000 69066
EAN: 87 12581 56545 9
© 2011 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
DLM4330/10
Hard case with silicone
for iPhone 4, 4S
Highlights
Access to all controls
The openings on this case allow convenient access to
all controls and dock connector, so you can use your
device while it's protected inside the case.
Hard-shell polycarbonate case
This hard-shell case is made out of highly durable
polycarbonate, so it provides strong protection for
your device.
Crystal-clear screen protector
The crystal-clear film adds an invisible layer of
protection against scratches and dust to your
device's display screen. It works using static
adhesion, so it's easy to apply and remove without
leaving any sticky residue.
Silicone accents
This case features non-slip rubberized or silicone
accents to improve your sense of grip on your
device.
Slim, pocket-friendly design
The slim design adds protection with minimal added
bulk, so your device still fits easily into your pocket
or bag for protection on the go.
Wrap-around protection
The material of this case wraps around from back to
front, providing protection for the corners and
perimeter of your device's face.
Protection in a snap
This case is made from a durable material that is
custom made to fit your device perfectly. The case is
quick and easy to put on, and adds a layer of
protection to your device.
Covered buttons
The case material covers the volume buttons, giving
you push-through control while your device stays
protected.
Design and finishing
Color(s): graphite
Materials: polycarbonate/silicone
Pattern: carbon fiber
Packaging dimensions
Type of shelf placement: Dummy
Packaging type: Dummy
Number of products included: 1
Packaging dimensions (W x H x D):
12
,7 x 17 x 2,5 cm
Gross weight: 0,073 kg
Nett weight: 0,02 kg
Tare weight: 0,053 kg
EAN: 87 12581 56545 9
Outer Carton
Number of consumer packagings: 36
•Outer carton (L x W x H): 35 x 20 x 45 cm
Gross weight: 3,61 kg
Nett weight: 0,72 kg
Tare weight: 2,89 kg
GTIN: 2 87 12581 56545 3
Inner Carton
Number of consumer packagings: 6
Inner carton (L x W x H): 18,5 x 16,5 x 14,2 cm
Gross weight: 0,5275 kg
Nett weight: 0,12 kg
Tare weight: 0,4075 kg
GTIN: 1 87 12581 56545 6
  • Page 1 1
  • Page 2 2

Philips DLM4330/10 Datasheet

Category
Mobile phone cases
Type
Datasheet

Philips DLM4330/10 is a protective case designed for iPhone 4 and 4S. It provides a strong protection with a hard-shell polycarbonate case and non-slip silicone accents for improved grip. The wrap-around protection extends to the corners and the face of the device. Despite the protection features, the slim design still allows the device to fit easily into a pocket or a bag. The case also features convenient access to all controls and the dock connector, and covered buttons for push-through protection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI