Integral INSSD128GM.26M2280 Datasheet

Integral
Brand
Integral
Model
INSSD128GM.26M2280
Category
Solid state drives
Type
Datasheet

This manual is also suitable for

i
i
Product Specification
256
GB
128
GB
64
GB
Rev:1
FEATURES
• M.2 2280 form factor with SATA III 6Gbps interface (backwards
compatible with SATA 3Gbps and SATA 1.5Gbps)
• Supports ‘M’ & ‘B’ Key sockets
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency
• Fully compatible with devices and OS that support the SATA
standard with M.2 M and B connectors
• Non-volatile Flash Memory for outstanding data retention -
Less likely to fail than HDD
• Ultra-efficient Block Management and Static and Dynamic
Wear Leveling
• Lower Power Consumption
• Shock resistance - No moving parts enable the product to be
used in tougher conditions
• Silent operation - Noiseless and low heat dissipation
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting
Technology
• Supports TRIM
• RoHS compliant
• CE and FCC tested
• Warranty – 3 Years
The Integral M.2 next generation form factor
SATA 6Gbps MLC SSD delivers all of the
advantages of flash memory technology for
SATA based computers.
M.2 SATA SSD storage solutions are designed for
Notebooks, Desktops, Ultrabooks and tablets.
They address the need for more low powered
compact storage without compromising
performance and reliability of solid state drives.
Integral M.2 SATA 6Gbps NGFF 22x80
i
i
Product Specification
Rev:1
PERFORMANCE Sequential Speed (up to)
64GB
Read 530MB/s (up to)*
Write 430MB/s (up to)*
128GB
Read 530MB/s (up to)*
Write 430MB/s (up to)*
256GB
Read 530MB/s (up to)*
Write 430MB/s (up to)*
INTERFACE
Interface
SATA III 6Gbps
Also Compatible with SATA II
3Gbps and SATA 1.5Gbps
NAND MLC
Form Factor
M.2 22x80 ‘M’ & ‘B’ Key
connector
Standard
M.2 (previously known as Next
Generation Form Factor (NGFF))
POWER CONSUMPTION
Supply Voltage 3.3V
Power Consumption (mA)
Read: 64GB = 1465 / 128GB =
1760 / 256GB = 1960
Write: 64GB = 1260 / 128GB =
1410 / 256GB = 1730
Idle = 285
DEVSLP = 4.9
ECC algorithm
Supports 72bit ECC correct per
1K Byte
MTBF
>2 Million Hours
ENVIRONMENTAL
Operating Temp 0° to +70°C
Non - Operating Temp -40° to +85°C
Humidity RH 90% under 40C in operation
Supports SMART Software Yes
Supports TRIM Yes (OS support required)
Compliancy CE, FCC, RoHS
PHYSICAL
Length 80mm
Width 22mm
Height 3.8mm
Weight 6g
Length (Packed) 11.5mm
Width (Packed) 13.2mm
Height (Packed) 5.7mm
Weight (Packed) 56g
WARRANTY
3 years
*Based on internal testing
CAPACITY PART CODE BARCODE (EAN)
64GB INSSD64GM.26M2280 5055288427419
128GB INSSD128GM.26M2280 5055288427402
256GB INSSD256GM.26M2280 5055288427587
1GB = 1,000,000,000 bytes. Formatted capacity is less.
This device should not be used as your sole backup.
Product design and specification subject to change or modification without notice. E&OE.
All trademarks acknowledged.
For warranty information please visit www.integralmemory.com/warranty
  • Page 1 1
  • Page 2 2

Integral INSSD128GM.26M2280 Datasheet

Integral
Brand
Integral
Model
INSSD128GM.26M2280
Category
Solid state drives
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents