Revolabs 07-STEMIC-PPP User manual

Category
Audio cables
Type
User manual
Rev 1.1 10/07
L
LL
Line
ineine
ine-
--
-to
toto
to-
--
-Mic Converter
Mic ConverterMic Converter
Mic Converter
Users Guide
Users GuideUsers Guide
Users Guide
The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations
requiring attenuation from line level to microphone level as found on many videoconferencing systems
and audio mixers. The cable also blocks phantom power bias voltages up to 48V.
To use the Line-to-Microphone level converter cable:
Step One:
Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.
Step Two:
Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or
video codec.
Step Three:
If desired, use the return audio RCA Female connector to monitor audio from the mixer / video
codec through an earpiece connected to the microphone.
Cable Specifications
Length: 6 Ft (1.8m)
Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit
Model: 07-STEMIC-PPP
Warranty
Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.
  • Page 1 1

Revolabs 07-STEMIC-PPP User manual

Category
Audio cables
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI