1
2
4
5
Solution Components:
1. Leg Kit
(Item No. 7160-0121)
Drilling is required for the rear leg only, the
front legs attach to the passenger side seat
studs.
2. 23” Top Plate
(Item No. 7160-0086)
Top plate allows console box to be o set
towards the passenger for added space .
3. Low Pro le Ergonomic Console Box
(Item No. 7160-0237)
The Low Pro le Ergonomic Console
Box can be mounted towards the dash,
creating added space for other mounting
equipment or easier passenger side exit.
Ergonomic design makes it easier to access
radios and siren controls. Console box
comes with standard faceplates and ller
panels (full faceplates must be ordered
separately).
4. Computer Mounting Bracket
(Item No. MCS-COMBRKT)
Computer Mounting Bracket allows the
computer to be mounted directly to the
console box, keeping the computer low in
the vehicle and out of the air bag zone.
5. Motion Attachment
(Item No. 7160-0285)
Motion Attachment has tilt capabilities
up to 90° forward/30° backward and can
swivel up to 60° right/60° left on two
different pivot points and can slide up to 5”
forward/backward.
Accessories:
Gamber-Johnson o ers a variety
of accessories for the console box
including full faceplates, LED lights, mic
clips, cigarette adapter kits and power
distribution blocks. (These are not
included in the Packaged solutions, must
order separately)
Rugged Docking Stations and Vehicle Mounts
Console System
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
3
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
Website: www.gamberjohnson.com
Item No. 7170-0143
Must order package as is. There are no substitutions.
Vehicle Solution Package:
Chevrolet Impala Police Package Only
(2006-2013)
/
