9
Preparation before installation
Dimension
• There should not be any obstacles surrounding
the unit.
• Prepare an installation hole that is only slightly
bigger than the cabinet size.
• Left and right side of the unit should be at least
15cm away from the wall.
•
•
• 15
Fence
or likewise
Less than 20cm
WALL
CEILING
Over 15cm
Over 50cm
45cm
O
ver 15cm
34.6cm
58cm
5
0
20
34.6
15
15
45
Remove the front intake grille
Push and release.
Pull up the front intake grille about 90° and
slide it slightly to the left to unhook the tabs.
90°
AIR CONDITIONER INSTALLATION
AIR CONDITIONER INSTALLATION
Installation procedures
58
Selecting the best location
• Install the unit to the nearest power outlet.
• Power supply point shall be the place where there is ease for access for power
disconnection in case of emergency.
• The air conditioner should be installed in a dry place where there are no draughts.
• Condensation from the air conditioner must be drained to an appropriate location.
• Do not install in a location where flammable gas leaks are a possibility.
• Usage in locations where the air is salty such as coastal areas or near hot spas, or where sulphurous gas is generated,
may lead to a malfunction. Please consult your dealer.
• Select an installation location which is rigid and strong enough to support or hold the unit and select a location for
easy maintenance.
•
•
•
•
•
•
•
9
RC-PC70/90Y(09-13) 1/30/01, 10:56 AM9