Electrolux 67160KF-N User manual

67160 KF-N

User manual Ceramic glass

induction hob

2

Dear Customer

Thank you for choosing one of our high-quality products.

With this appliance you will experience the perfect combination of functional

design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best per-

formance and control - indeed we are setting the highest standards of excel-

lence.

In addition to this you find environmental and energy saving aspects as an inte-

gral part of our products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfect-

ly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep it in a

safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Th

e

f

o

ll

ow

i

ng sym

b

o

l

s are use

d

i

n t

hi

s user

i

n

f

ormat

i

on:

1

Warning! This must be read! Important advice for the safety of persons and

information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

3Contents

Contents

Operating Instructions 4

Safety instructions 4

Description of the Appliance 6

Cooking surface layout 6

Control panel layout 6

Touch Control sensor fields 7

Displays 8

Residual heat indicator 8

Operating the appliance 9

Switching the appliance on and off 9

Setting the heat setting 9

Switching the double ring cooking zone on and off 10

Switching the STOP+GO function on and off 10

Using the automatic warm-up function 11

Locking/unlocking the control panel 12

Using the child safety device 13

Switching the power function on and off 14

Using the timer 15

Automatic switch off 18

Tips on Cooking and Frying 19

Cookware 20

Cookware for induction cooking zones 21

Tips on energy saving 22

Examples of cooking applications 23

Cleaning and Care 24

What to do if … 25

Disposal 27

Installation Instructions 28

Safety instructions 28

Assembly 30

Rating Plate 35

Guarantee/Customer Service 36

Service 39

Operating Instructions4

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not

covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose

physical, sensory or mental capabilities or lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruc-

tion by a responsible person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of

food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusi-

ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance on,

we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered

service engineers.

• Built-in appliances may only be used after they have built in to suitable built-

in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic

(cracks, scratches or splits), the appliance must be switched off and discon-

nected from the electrical supply, to prevent the possibility of an electric

shock.

• Repairs to the appliance must only be carried out by trained registered service

engineers.

5Safety instructions

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appli-

ance or hot cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm

from induction cooking zones that are switched on.

• Risk of burns! Do not place objects made of metal, such as knives, forks,

spoons and saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pres-

sure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cook-

ware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can

scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic

and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or

frying pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit un-

derneath it must not be covered.

Description of the Appliance6

Description of the Appliance

Cooking surface layout

Control panel layout

Induction cooking zone 2200 W

with power function 3100 W

Double ring cooking zone 700/1700 W

Induction cooking zone 1400 W

with power function 2500 W

Control panel Single cooking zone 1200 W

On/Off

with power indicator

Timer display

Cooking zone indicators

Timer function

Lock

with pilot light

Heat setting selection

Timer

Display

Connection

double ring cooking zone

with power indicator

STOP+GO

with pilot light

Power function with

pilot light

7Description of the Appliance

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are con-

trolled by touching sensor fields and confirmed by displays and acoustic signals.

Touch the sensor fields from above, without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Increase settings Increasing heat setting

Decrease settings Decreasing heat setting

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Lock Locking/unlocking the control panel

Power Switching the power function on and

off

Stop+Go To switch the Keep Warm setting on/

off

Double ring switch Switches outside ring

on and off

Description of the Appliance8

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the cook-

ing zones need some time to cool down. Look at the residual heat indicator .

3 Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in

the base of the cookware. The glass ceramic is merely heated by the residual

heat of the cookware.

The cooling fan switches itself on and off depending upon the temperature of

the electronics.

Display Description

Cooking zone is switched off

Keep warm setting Keep warm setting/STOP+GO function

is set

- Heat settings Heat setting is set

2 - 6 Heating setting plus

decimal point

Intermediate heat setting is set

Automatic warm up

function

Automatic warm-up function is

activated

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or

no cookware has been placed on the

cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Power Power function is switched on

Automatic switch off Switch off is active.

9Operating the appliance

Operating the appliance

3

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a function must

be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

3 The keep warm setting lies between and . It is used to keep food warm.

Control panel Display Pilot light

Switch on Touch for 2 seconds / lights up

Switch off Touch for 1 second / none goes out

Control panel Display

Increase Touch to /

Decrease Touch to

Switch off Touch and at the same time

Operating the appliance10

Switching the double ring cooking zone on and off

With the double ring cooking zone the heating surface can be matched to the

size of the cookware.

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are

switched on to the keep warm setting and then back to the heat setting that

was previously set.

3 Timer functions are not stopped by STOP+GO.

3 STOP+GO locks the whole control panel except the sensor field .

Control panel Pilot light

Switch on Touch for 1-2 seconds lights up

Switch off Touch for 1-2 seconds goes out

Control panel Display

To switch on Touch

To switch off Touch heat setting that was previously

set (not automatic warm up

function)

11Operating the appliance

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. The auto-

matic warm-up function sets the cooking zone to the highest setting for a cer-

tain period of time and then automatically switches back to the cooking setting

that was originally set.

3 If during the automatic warm up a higher heat setting is selected, e.g. from

Á to Ã, the automatic warm up is adjusted.

The length of time that the automatic warm up function operates depends on

the heat setting selected.

Step Control panel Display

1. Setting the level / /

2. Place to one side for a moment /

3. touch

4. touch in order to set the desired

cooking setting

Æ until /

after 3 seconds

Heat

setting

Length of the automatic

warm up

radiation element [min:sec]

Length of the automatic

warm up

induction [min:sec]

v 0:30 0:10

1 1:00 0:10

2 1:40 0:10

2. 2:40 1:20

3 4:50 3:10

3. 5:30 4:20

4 6:30 5:50

4. 8:10 8:10

5 10:10 10:10

5. 12:20 10:30

6 2:30 2:00

6. 2:30 2:00

7 3:30 2:30

8 4:30 2:50

9 --- ---

Operating the appliance12

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked

at any time in order to prevent the settings being changed e.g. by wiping over

the panel with a cloth.

3 When you switch the appliance off, the locking function is automatically

switched off.

Control panel Display

Switch on Touch (for 5 seconds)

Switch off Touch previously set heat setting

13Operating the appliance

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Switching off the child safety device

3 The child safety device can only be switched on and off, if no heat setting is set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking ses-

sion; it remains activated afterwards.

3 After overriding the child safety device, a heat setting or a function must be set

within approx. 10 seconds, otherwise the appliance automatically switches itself

off.

Step Control panel Display/Signal

1. Switch on appliance. (Do not set

a heat setting.)

2. Touch for 4 seconds

The child safety device is switched on.

Step Control panel Display/Signal

1. Switch on appliance. (Do not set

a heat setting.)

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal. After switching

off the appliance, the child safety device is active again.

Operating the appliance14

Switching the power function on and off

The power function makes more power available to the induction cooking zones,

e.g. to bring a large quantity of water to the boil quickly.

The power function remains activated for differing periods of time:

3 If the power function has ended, the cooking zones automatically switch back to

the heat setting set previously.

Power Management

The cooking zones of the cooking surface

have a maximum power available to them.

Two cooking zones make up a pair (see fig-

ure).

So that the Power function can always be

carried out, Power Management may re-

duce the power of the other cooking zone

in the pair

Example: heat setting 9 is selected on a

cooking zone. The Power function is

switched on for the cooking zone paired up

with it. The Power function is performed,

but heat setting 9 on one cooking zone and Power function on the other cook-

ing zone of a pair exceeds the maximum output for both. Therefore Power Man-

agement reduces the first cooking zone that was switched on from 9 to 7, for

example, and the display for this cooking zone alternates between 9 and 7 and

then remains on the current maximum of 7. (Whether the display alternates be-

tween 9 and 7 or 9 and 6 or other values, depends on the appliance type and the

size of the cooking zone.)

Control panel Display

Switch on Touch

Switch off Touch

Touch

Cooking zone

diameter [mm]

Power time [min]

210 8

145 2

15Operating the appliance

Using the timer

3 If a heat setting is set on this cooking zone in addition to a countdown timer,

the cooking zone is switched off after the time set has elapsed.

3 If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

3 If the pilot light is flashing more slowly, the heat setting can be set or modified.

3 If other timer functions are set, after a few seconds the shortest remaining time

of all the timer functions is displayed and the corresponding pilot light flashes.

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

Step Control panel Display

1. Touch once Pilot light of the first

cooking zone flashes

2. Touch once Pilot light of the second

cooking zone flashes

3. Touch once Pilot light of the third

cooking zone flashes

4. Touch once Pilot light of the fourth

cooking zone flashes

Operating the appliance16

Setting the time

Switching off the timer function

Changing the time

Step Control panel Indicator

1. Select cooking zone Pilot light for the cooking zone selected

flashes

2. Touch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel Indicator

1. Select cooking zone Pilot light of cooking zone selected flash-

es faster

Time remaining is displayed

2. Touch The time remaining counts backwards to

00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel Indicator

1. Select cooking zone Pilot light of the selected cooking zone

flashes faster

Time remaining is displayed

2. Touch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.

The time is set.

The time counts down.

17Operating the appliance

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

Operating the appliance18

Automatic switch off

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for a cook-

ing zone within approx. 10 seconds, the cooking surface automatically switch-

es itself off.

• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for

longer than approx. 10 seconds, a signal sounds and the cooking surface

switches off automatically.

• If all cooking zones are switched off, the cooking surface automatically

switches itself off after approx. 10 seconds.

Cooking zones

• If one of the cooking zones is not switched off after a certain time, or if the

heat setting is not modified, the relevant cooking zone switches off automati-

cally. is displayed. Before being used again, the cooking zone must be set to

.

Heat setting Switches off after

v, 1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

19Tips on Cooking and Frying

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, espe-

cially in products containing starch, can constitute a health risk due to acryla-

mides. Therefore we recommend cooking at the lowest possible temperatures

and not browning foods too much.

Tips on Cooking and Frying20

Cookware

• You can recognise good cookware from the bottoms of the pans. The bottom

should be as thick and flat as possible.

• Cookware made of enamelled steel or with aluminium or copper bottoms can

leave discolorations on the glass ceramic surface which are difficult or impos-

sible to remove.

Page is loading ...

Electrolux 67160KF-N User manual

This manual is also suitable for

Electrolux 67160KF-N User manual

Related papers